Gundam (Franchise)
BANDAI RG 1/144 STRIKE FREEDOM GUNDAM
The Real Grade Strike Freedom is the first RG kit with the frame molded in this gold color. The Dragoons even feature gold plating for that beautiful result right out of the box. Does not include a stand.
$53.90$45.90
BANDAI HGUC 1/144 RX-78-2 GUNDAM (REVIVE)
From July of 1980 through March of last year, Bandai has sold over 434 million Gunpla kits. As part of the celebrations, a new HGUC 1/144 RX-78-2 Gundam, created using the latest in Gunpla engineering, will be released for the lineup's 35th anniversary in July. The kit, the first revision in 14 years of the iconic 1/144 RX-78-2 Gundam, embodies the anniversary theme "Revive" with all-new molds. Ideal proportions, an evolution in mobility, and an easier build than ever combine to show new frontiers for Gunpla.
$18.90$15.90
FLAMING SNOW HG-75 | 1/144 GUNDAM AERIAL REBUILD FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI NG 1/100 LEGEND GUNDAM
The very impressive Legend Gundam, from "Gundam Seed Destiny," is molded in colored plastic and all the parts snap together for easy assembly. Polycaps are included for joints. A die-cut clear card featuring pilot Rey Za Burrel lists his specs; a stand to hold the card upright is included in the box. Get yours now!
$61.90$52.90
BANDAI RG 1/144 FREEDOM GUNDAM
The wait seemed long but the new Real Grade kit from Bandai is finally here! The RG ZGMF-X10A Freedom Gundam is another masterpiece of kit engineering featuring that flexible premolded frame, complementary colored armor parts, and a monster load of markings (two sheets!), not to mention that amazing amount of articulation! Freedom!
$41.90$36.90
FLAMING SNOW RG-29 | 1/144 SAZABI FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HGUC 1/144 UNICORN GUNDAM (DESTROY MODE)
Marking Bandai's 100th entry in the High Grade Universal Century plastic kit series, here's an incredibly detailed snap-fit kit of the titular mecha from "Mobile Suit Gundam UC" in Destroy Mode! This milestone kit comes molded in color and features newly introduced polycap joints that allow for a wider range of posing possibilities! Its psycoframe is molded in clear pink plastic, and it comes armed with two beam sabers, a beam magnum, and a shield. Foil stickers are provided for detail.
$30.90$26.90
FLAMING SNOW HGCE-23 | 1/144 STRIKE FREEDOM & DESTINY GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$8.90$7.90
BANDAI HG 1/144 LEGEND GUNDAM
One of the more overdone designs in Gundam! This HG kit of the Legend Gundam comes with the clear blue "trails" leading from the whopping big Dragoon Unit. All the parts are molded in colour and snap together for ease in assembly. No base is included, though you can mount the finished model on the bases that have been included in previous HG kits. Order it now!
$30.90$26.90
BANDAI MG 1/100 AILE STRIKE GUNDAM
An amazingly detailed and fully posable snap-fit Master Grade model of Aile Strike Gundam Ver. RM. Molded in multiple colors, so painting is not entirely necessary. A stand is included as well. Order yours today!
$69.90$60.90
BANDAI HG 1/144 PERFECT STRIKE GUNDAM
HIghly detailed snap-together kit molded in multiple colors, so painting is not necessary. Stickers provided for markings. Get yours today!
$29.90$25.90
BANDAI RG 1/144 GUNDAM EPYON
The mighty Gundam Epyon from "Mobile Suit Gundam Wing" gets a completely new Real Grade (RG) model kit from Bandai! It's equipped with a new gimmick that's optimized to help it handle its beam sword powerfully and naturally, plus an amazing all-new original feature allows it to transform into a double-headed pterosaur! Its torso flexibility is better than ever, enabling it to bend forward; the hip joints have a lock mechanism for strong stances. The upper part of the wrist and the forearms are more flexible than before too; the shoulder armor allows Epyon to raise its shoulders while keeping the shoulders in position, enabling it to raise the beam sword with both hands! The blades on its knees will not interfere with kneeling poses, and the height of the wings can be adjusted by moving the base shaft. When in pterosaur mode, its mouths can be opened and closed, and a pull-out ball movement is built into Epyon's shins to serve as the pterosaur's neck joints. An advanced MS joint is adopted for the heat rod for a high degree of flexibility; the cable that connects the beam sword and the mount latch uses a lead wire. This classic robot is now better than ever before thanks to Bandai -- order yours today!
$70.90$61.90
FLAMING SNOW MG-15 | 1/100 WING GUNDAM ZERO EW VER. KA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$8.90$7.90
FLAMING SNOW MG-115 | 1/100 AILE STRIKE GUNDAM (VER. RM) FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HG 1/144 BLACK KNIGHT SQUAD SHI-VE.A
The Black Knight Squad Shi-ve.A from "Mobile Suit Gundam Seed Freedom" is now an HG model kit from Bandai! It's equipped with the "Seed Action System" internal structure that specializes in reproducing impressive poses! You can reproduce the shield injection mode by parts replacement; a lead wire is included. The chest armor opens and closes, and the beam cloak is made of soft material with gradation printing. Three beam sabers are included; they can be connected to equip both hands with a twin beam saber. Effect parts that can be attached to the toes are included. This kit is molded in color, too, so you'll get a great-looking result just by assembling it. Order yours today!
$46.90$39.90
FLAMING SNOW HG-91 | 1/144 MIGHTY STRIKE FREEDOM GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HGCE 1/144 FREEDOM GUNDAM
The newest Gundam to appear in Bandai's HGCE REVIVE lineup is Freedom Gundam! Using a new mold and new molding technology, this terrific kit builds into a beautifully-proportioned and highly posable model. It can be displayed in Full Burst mode or HIMAT mode if you like. It's accessorized with an Alps beam rifle, laminate anti-beam shield, two Rakeruta beam sabers, and hands to hold them with too.
$30.90$26.90
FLAMING SNOW MG-82 | 1/100 STRIKE ROUGE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
BANDAI FM 1/100 CALAMITY GUNDAM
From "Mobile Suit Gundam SEED" comes a completely new GAT-X131 Calamity Gundam, the first in a new series of "FULL MECHANICS" action figure kit! The head pulls out from the body and has a built-in gimmick to ease the buffer using the collar parts. The movable axis of the abdomen can swing both back and forth, and left to right.The Todesu Block is included as a handheld weapon. The grip can be swung forward for a powerful stance! The Kafer Zwei (shield) is included with a swinging barrel, as well! Order this incredible action figure for your collection today!
$83.90$73.90
FLAMING SNOW MG-61 | 1/100 DESTINY GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HG 1/144 CHAOS GUNDAM
An excellent High Grade kit of the Chaos Gundam, from Gundam SEED Destiny. All parts are molded in colour with terrific detail; all parts snap together, for easy assembly. Polycaps for the joints allow flexibility and lots of great poses. When completed, the Chaos Gundam can transform to Mobile Armour Mode. Paint is not necessary but would definitely improve the look of the finished model. Order it now!
$39.90$31.90
BANDAI MG 1/100 FULL ARMOR UNICORN GUNDAM VER. KA
One of the most epic MG Unicorn Gundams around just got better! This amazing kit is capable of transforming from Unicorn to Destroy Mode. It comes with green psycho frame parts, two Beam Magnums, two Hyper Bazookas, two Triple Missile Pods, two Grenade Launchers, six Beam Gatling Guns, three Shields, four Beam Sabers and two Hyper Beam Javelins! As a special bonus, this kit will also include a sheet of Premium Decals unique to the MG Full Armor Unicorn Gundam Ver.Ka for an even more intense and detailed look! These decals are only available with purchase of this kit, and are not available with the normal version.
$136.90$119.90
FLAMING SNOW RG-30 | 1/144 FULL ARMOR UNICORN GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$8.90$7.90
BANDAI MG 1/100 GUNDAM ASTRAY RED FRAME (LOWE GUELE'S CUSTOM)
Like the Blue Frame, Lowe Guele's Astray Red Frame Kai boasts amazing articulation through the generous use of poly-caps. Once assembled, this MG will be able to stand in a variety of poses wielding its weapons. Its backpack can easily take on a several forms with some simple changes. As 'Tactical ArmsIIL' it can change between Flight Form, Delta Form, and V form. Its Sword Form changes to Work Form, whereas Arrow Form takes the shape of a giant bow. The Beam Torch can be held in the mech's hand or attached to the Arrow Form. The MG Astray also comes with its two signature katana; Gerbera Straight forged by Kiku Ichimonji and Tiger Pierce by Kotetsu. The two katana even feature signatures carved into the handles!! Two 1/100 scale figures of Lowe Guele, one sitting and one standing, are also included plus dry transfer decals and stickers for markings.
$82.90$73.90
