Gundam (Franchise)

To celebrate the 10th anniversary of Gundam 00 and the 00 Qan[T]'s success in the RG line series, the Gundam Base Tokyo is releasing the clear color version of the 00 Qan[T] Full Saber! Except for its inner frame the kit comes with fully clear colored parts. Order yours now!

Read more less

The Real Grade 1/144 Gundam Exia is now available in the Extra Finish version as an Expo Limited item! Order yours now!

Read more less

The HG Gundam Lfrith is appearing in clear colors from the prequel "PROLOGUE" of Mobile Suit Gundam THE WITCH FROM MERCURY! Double-sided stickers make it possible to choose to recreate the luminous state or the non-luminous state of the Shell Units. The shield can be separated into 7 Bit Staves and can be attached to the backpack and Receiver Gun, and the Receiver Gun can also be equipped with a huge beam blade effect part. Clear molding colors and discerning part division allow you to enjoy a beautiful finish just by assembling it. Order now!

Read more less

A clear color version of the Beguir-Beu from the Mobile Suit Gundam THE WITCH FROM MERCURY PROLOGUE is here! Its parts colors and structure has been meticulously designed to enable beautiful results just by simply assembling the kit. Along with the anti-MS Bayonets attached to both arms, this model comes with one display base for the Non-Kinetic Pods and one wire to display one in a deployed state. The deployment mechanism in the backpack flight unit has been recreated, and the front and back claw parts in the toes and the heels of the claws can move separately. Order now!

Read more less

Gunpla from "Mobile Suit Gundam: The Witch From Mercury" is now available! HIGH GRADE 1/144 Gundam Aerial is now available in Ichiban Kuji limited edition solid clear color! Order now!

Read more less

The Gundam Base Japan has announced the release of a High Grade 1/144 Gundam Aerial in clear color molding to commemorate the successful run of the Mobile Suit Gundam: The Witch from Mercury anime! All of the armor parts of the Gundam Aerial were converted into clear plastic molds, featuring a beautiful representation of a multiple clear-colored Gundam Aerial, while maintaining the joints and connectors in solid colored plastic to secure durability when performing dynamic poses. Get yours now!

Read more less

To celebrate the 10th anniversary of Mobile Suit Gundam 00, Gundam Base limited production releases a set that includes five clear colored season one Gundams from the 1st season of the series.That includes HG 1/144: Gundam Exia, Gundam Dynames, Gundam Virtue, Gundam Kyrios, and Gundam Nadleeh.***This is an event limited production model kit.

Read more less

This is an accessories set that contains the "Wings of Light" set which is compatible for the model kit MGEX 1/100 STRIKE FREEDOM GUNDAM. This is definitely a MUST HAVE for all of you that own the MGEX Strike Freedom Gundam! Only comes with the accessories set, model kit and display stand are not included.

Read more less

Introducing a High Grade kit of the new Mighty Strike Freedom Gundam from the movie "Mobile Suit Gundam SEED Freedom"!Recreate iconic action poses from the movie with the specialized internal structure of the "SEED Action System." The individual hip joint connections in both legs allow for upward and downward swinging, enabling you to achieve dynamic and precise posing.Features a Real Metallic Gloss Injection material for the gold parts, enhancing their metallic luster.The wings have extensive individual articulation and can recreate expanded configurations. The white wings have 8 sliding joints for replicating the deployed state.For added realism, 3D metallic stickers are included for a luminous effect. The blade parts of the included "Futsunomitama" sword showcase different textures with two surface finishes. The "Proud Defender" can be removed and displayed separately, and you can recreate the forehead cannon's deployed state through part replacement. The hip rail gun can be extended to replicate a simultaneous firing position.Comes with an array of armaments, including beam sabers, beam shields, and even a grip for replicating connected beam saber states.

Read more less

As seen in "Mobile Suit Gundam Seed Freedom," the Immortal Justice Gundam is now a HG model kit from Bandai! It's equipped with the "Seed Action System" internal structure that specializes in reproducing impressive poses! It can transform into its MA form by replacing some parts. A new shield combining offense and defense is included; clear effect parts are also included for the shield. Effect parts can also be attached to the boomerangs mounted on the hip armor on both sides. The beam cutter extending from the knees to the toes is reproduced with effect parts. A mechanism allowing the connecting shafts of the hip joints to slide independently promotes bold movements of the legs, too! This kit is molded in color, so you can get a satisfying finish just by assembling it, without the need for paint. Order it for your own collection today!

Read more less

This is an accessories set that contains the "Wings of Light" set which is compatible for the model kit MGSD Freedom Gundam. Only comes with the accessories set, model kit is not included.

Read more less

Introducing a High Grade kit of the Infinite Justice Gundam Type II from the movie "Mobile Suit Gundam SEED Freedom"! The kit is equipped with a specialized internal structure "SEED Action System" for capturing iconic action poses from the film. Achieve the graceful "leg flexibility" seen in the series by adding a pivot axis to the legs. Includes a lead wire for replicating the anchor's launching state. The backpack boasts four individually movable wings, allowing for dynamic upper and lower expansion. Each wing also comes with beam effect parts for added flair. The backpack can also be detached for solo display. The silver parts feature a Real Metallic Gloss Injection material, enhancing their metallic luster. Additionally, it comes with effect parts that can be attached to the head for added customization. Includes a variety of armaments, such as beam rifles, beam sabers, and a beam shield. The beam boomerang housed within the shield can also be removed and held in hand!

Read more less

From DDB Corgi, comes an accessories set for the HG 1/144 MIGHTY STRIKE FREEDOM GUNDAM! It comes with a pair of wings of light with lightning effects, a custom display base with "PROUD DEFENDER" printed on it, and some additional attachments. Wait no more, get this value and amazing set of accessories for your Mighty Strike Freedom Gundam now! This set contains: 1x Pair of Wings of Light 8x Set of Lightning Effect for Wings of Light 1x Proud Defender Display Base 8x Attachments for Display Base 1x Pair of Attachments for Backpack 1x Pair of Attachments for Railgun

Read more less

A prototype high-powered handheld railgun, designed to combat the Femto-Technology Armor found on the Black Knight Squad's mobile suits. Multiple of this weapon was provided to Compass mobile suits in their battle against the Kingdom of Foundation. This weapon is suitable for most 1/144 model kits, but most compatible with the following Gundam model kits: HG Rising Freedom Gundam (Part 16 & 18 for leg part replacement) HG Immortal Justice Gundam (Part 15 & 17 for leg part replacement) HGCE Impulse Gundam (Part 11 exclusive connector) HGCE Destiny Gundam (Part 12 exclusive connector) RG Destiny Gundam (Part 13 exclusive connector) RG Impulse Gundam (Part 14 exclusive connector)

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for Gundam Aerial! Can be combined with the Gundam Aerial Permet Effect Unit + Gund-bits Weapon Display Base to showcase Gundam Aerial at its finest! Suitable for: High Grade Gundam Aerial High Grade Gundam Aerial Rebuild High Grade Gundams from 'The Witch From Mercury' Model kit and Effect Unit + Weapon Display Base is not included.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

This is an accessories set that contains the "Wings of Light" set which is compatible for the model kit HGCE 1/144 Strike Freedom Gundam. This is something you don't wanna miss out on if you own the HGCE Strike Freedom Gundam! Only comes with the accessories set, model kit is not included.

Read more less

This kit of Shinn Asuka's Destiny Gundam from "Gundam Seed" is an entirely new mold! It features its weapons and plenty of effect parts cast in clear material for a striking appearance (including for its Wings of Light), and will be highly posable upon completion. Parts are molded in color so painting isn't needed, and it snaps together too; foil stickers are included for the markings. Order it now!

Read more less

The High Grade Cosmic Era ZGMF-X20A Strike Freedom Gundam can recreate its HIMAT and Full Burst modes! Fully posable after assembly, it's armed with two of the MA-M21KF High-Energy Beam Rifle, two of the MA-M02G Beam Saber and an MX2200 Beam Shield.  All parts come molded in multiple colors and features snap fit construction. Colorful marking seal stickers are included to provide extra colors and markings.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for HG 1/144 RISING FREEDOM GUNDAM! Model kit is not included.

Read more less

Preorder Full Price: $26.90 (U.P. $29.90) Official Release Date: October 2024 (Delayed to December 2024)JFC's Estimated Delivery Date: January 2025 ---------------------------- The 1/100 White Slash Flight Pack by Core Creation is designed based on the Proud Defender from Gundam Seed Freedom! This expansion kit features exceptional design elements, including advanced articulation and innovative gimmicks. Comes with its own set of waterslide decals too!Additionally as a first batch bonus, it includes not just one but two Futsunomitama blades, enhancing its versatility. Get this set for yourself now! Compatible with: MGEX 1/100 STRIKE FREEDOM GUNDAM MG 1/100 STRIKE FREEDOM GUNDAM MG 1/100 FREEDOM GUNDAM VER.2.0 1/100 ETERNAL STAR GLORY IN-ERA THUNDERBOLT DABAN 8802/8802S STRIKE FREEDOM GUNDAM

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Kira Yamato’s mobile suit Freedom Gundam from the hit series “Gundam Mobile Suit Gundam SEED” and “Mobile Suit Gundam SEED Destiny” gets an updated Master Grade 2.0 release from Bandai! This new kit has been redesigned with fantastic details and improved articulation!  All parts come molded in multiple colors and features a snap fit construction.

Read more less