Gundam (Franchise)
BANDAI HG 1/144 BLAZE ZAKU PHANTOM (REY ZA BURREL)
Rey Za Burrel's customised Blaze Zaku Phantom, in a terribly manly lilac and pale grey colour scheme, is nevertheless quite striking when completed. Molded all in colour and featuring snap assembly, this kit also includes stickers for additional detail. Very nice! Order it now!
$29.90$25.90
FLAMING SNOW MG-02 | 1/100 FREEDOM GUNDAM VER 2.0 FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
DDB CORGI HG GUNDAM AERIAL PERMET EFFECT PART + GUND-BITS WEAPON DISPLAY BASE
Beautify your display setup with this effect accessory set, specially crafted for the High Grade Gundam Aerial! Can be combined with the 'The Witch From Mercury' Display Stand to showcase Gundam Aerial at its finest! Model kit, Gund-bit Weapons are not included.
$12.90$10.90
BANDAI HG 1/144 GUNDAM LFRITH
Launched ahead of the latest work in the Gundam series, "Mobile Suit Gundam: The Witch from Mercury"! This mobile suit plays an active role in the prequel to the main story, "PROLOGUE", and makes an early appearance! Get yours today!
$29.90$25.90
CORE CREATION PREORDER-NOV 2024🔥MG 1/100 WHITE SLASH FLIGHT PACK EXPANSION SET (READ DESCRIPTION)
Full Price Preorder: $26.90 ($29.90 after PO period) This item is currently pre-order only, ETA is November 2024. If you have any queries, do contact us via Whatsapp to enquire, thank you! Preorder Information: Any other items placed in the same order as preorder items will only be delivered after all items in the order arrive. Preorder items are NOT ELIGIBLE for any discounts. Preorders may be subjected to manufacturing and shipping delays, which are not within our control. We will still try our best to fulfill your order ASAP. Full refund will be issued if your order is not allocated. There will be no refund for cancellations. ---------------------------- The 1/100 White Slash Flight Pack by Core Creation is designed based on the Proud Defender from Gundam Seed Freedom! This expansion kit features exceptional design elements, including advanced articulation and innovative gimmicks. Comes with its own set of waterslide decals too!Additionally as a first batch bonus, it includes not just one but two Futsunomitama blades, enhancing its versatility. Get this set for yourself now! Compatible with: MGEX 1/100 STRIKE FREEDOM GUNDAM MG 1/100 STRIKE FREEDOM GUNDAM MG 1/100 FREEDOM GUNDAM VER.2.0 1/100 ETERNAL STAR GLORY IN-ERA THUNDERBOLT DABAN 8802/8802S STRIKE FREEDOM GUNDAM
$29.90$26.90
BANDAI HG 1/144 GYAN STROM (AGNES GIEBENRATH'S CUSTOM)
Introducing a High Grade kit of Agnes Giebenrath's Gyan Strom from the movie "Mobile Suit Gundam SEED Freedom"!The kit is equipped with a specialized internal structure "SEED Action System" for capturing iconic action poses from the film. It also features enhanced arm articulation thanks to the sliding mechanism in the shoulder armor connection.The distinctive beam axe, designed uniquely for this suit, can be mounted to the waist by swapping in the included storage grip. The movable wings allow you to position the missile launcher forward.By deploying the chest armor and inserting the Gatling parts, you can recreate the Gatling's extended state. It also includes a Heat Rod part that can be equipped on the right arm.Lastly, the Gyan Strom includesh effect parts that can be attached to the shield for added dynamic display options!
$47.90$40.90
DDB CORGI GUNDAM SEED DISPLAY STAND FOR 1/144 MODEL KITS
Beautify your display setup with this effect accessory set, specially crafted for 1/144 model kits from Gundam Seed! Model kit is not included.
$7.90$6.90
FLAMING SNOW MGSD-01 | FREEDOM GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW HG-76 | 1/144 GUNDAM SCHWARZETTE FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
DDB CORGI HG 1/144 DISPLAY STAND FOR RISING FREEDOM GUNDAM (WHITE)
Beautify your display setup with this effect accessory set, specially crafted for HG 1/144 RISING FREEDOM GUNDAM! Model kit is not included.
$8.90$6.90
BANDAI RG 1/144 GUNDAM ASTRAY GOLD FRAME AMATSU MINA
The distinctive Gundam Astray Gold Frame Amatsu Mina from "Gundam Seed Astray" features beautifully reproduced exterior textures, and the "Maga no Ikutachi" on its back can be expanded and retracted. It's equipped with the Okitsu no Kagami, the Trikeros Kai, two of the Totsuka no Tsurugi, the Tsumuha no Tachi and two of the Maga no Shirahoko.
$52.90$44.90
BANDAI MG 1/100 STRIKE ROUGE GUNDAM OOTORI (VER. RM)
The MG Strike Rouge Gundam Ootori is highly detailed and articulated model kit molded in multiple colors with stickers for the markings. Get yours now!
$70.90$61.90
BANDAI MG 1/100 JUSTICE GUNDAM
The Justice Gundam from "Gundam Seed" joins the Master Grade kit lineup from Bandai! The Fatum-00's beam cannon base can be displayed in flight form without any parts swapping, and the Fatum-00 can also be ridden by the Justice Gundam and displayed in flight! Â The Justice Gundam is armed with one Lupus beam rifle, two Lacerta beam sabers, one Bassel beam boomerang, and the laminated anti-beam shield. The cockpit opens and closes, and a pilot figure is included; it also comes with stickers and dry-transfer decals for markings.
$87.90$74.90
BANDAI MG 1/100 STRIKE FREEDOM GUNDAM
Strike Freedom Gundam, arguably the most popular mobile suit from the Gundam Seed Destiny anime series, finally gets the Master Grade treatment! This MG kit of Strike Freedom Gundam comes with the same fantastic detail, high quality, and super posability that MG builders would come to expect from Bandai. Strike Freedom Gundam comes armed with its trademark weaponry including the high energy beam rifles, Super Lacerta beam sabers, beam shield, Xiphias rail guns, and its most distinct and powerful weapon of all, the Super Dragoon mobile weapon wings that can extend and detach from the main wing frames. As usual, stickers and custom decal markings are provided along with a custom display base.
$83.90$73.90
FLAMING SNOW MGSD-02 | GUNDAM BARBATOS FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HGCE 1/144 INFINITE JUSTICE GUNDAM
Bandai brings us a new Gunpla kit from "Gundam Seed" of a 1/144 HGCE Infinite Justice Gundam! The internal structure of the model possesses the ability to pose this finished kit in a ton of different ways. Both of the Fatum-01 wings are equipped with movable joints to allow them to warp up and recreate the classic silhouette during aerial battles. Tons of beam-effect parts are also included Order today!
$37.90$32.90
DDB CORGI HG GUNDAM AERIAL REBUILD PERMET EFFECT PART + GUND-BITS WEAPON DISPLAY BASE
Beautify your display setup with this effect accessory set, specially crafted for the High Grade Gundam Aerial Rebuild! Can be combined with the 'The Witch From Mercury' Display Stand to showcase Gundam Aerial Rebuild at its finest! Model kit, Gund-bit Weapons are not included.
$12.90$10.90
BANDAI RG 1/144 DESTINY GUNDAM
The Real Grade Destiny Gundam might be the best looking Gundam kit of them all! Comes complete with his massive weapons and enough markings to take up an evening or two! Molded in multiple colors so painting is not necessary. Get this kit for yourself now!
$41.90$36.90
BANDAI NG 1/100 LEGEND GUNDAM
The very impressive Legend Gundam, from "Gundam Seed Destiny," is molded in colored plastic and all the parts snap together for easy assembly. Polycaps are included for joints. A die-cut clear card featuring pilot Rey Za Burrel lists his specs; a stand to hold the card upright is included in the box. Get yours now!
$61.90$52.90
DDB CORGI FM GUNDAM AERIAL PERMET EFFECT PART + GUND-BITS WEAPON DISPLAY BASE
Beautify your display setup with this effect accessory set, specially crafted for the Full Mechanics Gundam Aerial! Can be combined with the 'The Witch From Mercury' Display Stand to showcase Gundam Aerial at its finest! Suitable for: Full Mechanics Gundam Aerial Model kit, Gund-bit Weapons are not included.
$15.90$13.90
BANDAI HG 1/144 SAVIOUR GUNDAM
Fantastic high-grade injection-plastic kit of the Saviour Gundam in 1/144 scale! Beautifully-molded all in colour; this coupled with snap-fit assembly means no paint or glue are required. Polycaps make the joints movable; and the completed model can transform into Mobile Armour mode. Foil stickers for detail are also included. Get your Saviour today!
$38.90$33.90
BANDAI HG 1/144 PERFECT STRIKE GUNDAM
HIghly detailed snap-together kit molded in multiple colors, so painting is not necessary. Stickers provided for markings. Get yours today!
$29.90$25.90
BANDAI HG 1/144 BUSTER GUNDAM
To coincide with the 10th anniversary of Gundam Seed Bandai has rereleased this hugely popular HG kit of the Buster Gundam in a 'remastered' color reflecting those seen on the upcoming Blu-ray release. A stand attachment and marking stickers are also included in this special release.
$23.90$19.90
BANDAI HG 1/144 GUNNER ZAKU WARRIOR (LUNAMARIA HAWKE CUSTOM)
Fantastic high-grade injection model of Lunamaria Hawke's Gunner Zaku Warrior features parts molded in colour (so no paint is necessary), which snap together (so no glue is necessarily. Polycaps at the joints mean it's poseable when complete; and foil stickers for details are included. Order it now!
$23.90$20.90
