Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai's big Gunpla release of 2012 is old fan favorite Nu Gundam as drawn by famous Gundam artist Hajime Katoki.
The original Master Grade Nu Gundam released way back in 2001 and a lot has changed in Gunpla engineering and the new Nu Gundam Ver Ka is an excellent example of just how far Bandai have come.
Key features of the Nu include an all non-ABS plastic frame making it lighter, hidden green psycho frame that is exposed when certain sections of the armor seperate, the ability to take Bandai's LED to light up the head, water-slide decals for markings, and the option to build it as a twin Fin Funnel set up!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The formidable Hi-Nu Gundam gets the "Version Ka" treatment!
Amuro Ray's customized mount from "Char's Counterattack" becomes a MasterGrade kit with design overseen by master mecha designer Hajime Katoki. Fully posable after assembly, this glorious Gundam can have LEDs installed (LED units sold separately and not included) if you choose. It's armed to the teeth with a beam rifle, a hyper bazooka, a shield, six fin funnels, three beam sabers, and a stand.
You won't want to miss out on this one!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
This 1/144-scale Real Grade kit of Char's custom version of the fast and agile Z'gok features full posability thanks to its internal "skeleton."
Parts come molded in color, so no paint is required to complete this easy to build kit, but it can be used to add detail! Includes stickers for markings.
Last piloted by Char Aznable in "Char's Counterattack," the sizzlin' Sazabi now joins Bandai's HGUC series as a superbly detailed snap-fit plastic kit!
Molded in color, the Sazabi will be fully poseable with polycap joints upon completion. Its features include a movable mono eye and openable funnel containers, and this Mobile Suit is fully equipped with 12 funnels (six in storage mode and six in deployed mode), a beam shot rifle, two beam sabers, a shield, and a beam tomahawk with two optional beam parts. Stickers for its mono eye and markings are provided.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
First introduced in the "Mobile Suit Gundam: Char's Counterattack - Beltorchika's Children" novel, the Hi-Nu Gundam now gets the HGUC treatment from Bandai!
This snap-fit plastic kit features polycap-jointed articulation and comes with a Beam Rifle, Nu Hyper Bazooka, Beam Saber, and shield, plus two detachable Fin Funnels that can be set in firing mode.
Foil stickers and marking stickers are provided!
Nu Gundam is finally offered in Bandai's HGUC line, and what a superb kit this turned out to be!
Sharply detailed and molded in color, this snap-fit kit of Amuro Ray's last piloted Mobile Suit in "Char's Counterattack" features polycap-jointed articulation and is fully equipped with two types of beam sabers, a beam rifle, a new hyper bazooka, and of course, its distinctive fin funnels that are detachable from its back and can be set in firing mode.
Stickers are provided to add detail to the completed model.
MS Mechanical Bust is a display model of Mobile Suits from the bust up that have been sculpted meticulously. This seventh installment features the MSN-04 Sazabi!
You can appreciate the detailed molding and construction by combining the exterior and inner mecha from the lineup. The Luminous Unit that is included with the inner mecha allows you to recreate the glow emitted from the mobile suit.
[Lineup]
MSN-04 Sazabi Exterior (Color ver.)
MSN-04 Sazabi Exterior (Mechanical Clear ver.)
Inner Mecha (with Yellow Luminous Unit)
*A Luminous Unit included with the interior mecha is required to achieve light-up effects.
Gunpla from "Mobile Suit Gundam: Char's Counterattack" is now available!ENTRY GRADE 1/144 ν Gundam is now available in Ichiban Kuji limited edition solid clear color!
Order now!
This is the Sazabi you've been waiting for: the RG realization of the mobile suit piloted by the Red Comet, Char Aznable himself, in "Mobile Suit Gundam: Char's Counterattack!" This Sazabi kit was created in pursuit of a realistic, detailed representation of the mobile suit from the series. Even simple armaments like the arm cylinders and funnels, as well as propulsion mechanisms like the verniers and backpack, have been faithfully recreated.The mechanisms in this kit and its high range of motion allow for the recreation of a variety of poses from the movie, despite being condensed into 1/144 small scale kit, thanks to the carefully crafted lifelike gimmicks for which the RG line is known.In addition to several hand parts, this kit includes all of the characteristic armament you'd expect.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Hi-Nu Gundam, as seen in "Mobile Suit Gundam: Char's Counterattack - Beltorchika's Children," gets a brand-new RG model-kit release from Bandai, and it's absolutely packed with details!The Hi-Nu is equipped with a multi-link gimmick that slides the armor with the movement of its joints; the armor parts can be slid aside to expose the mechanical internal frame. Bold poses are possible by swinging the upper waist base up and down! The lumber armor is equipped with a connection joint, and its new design means it won't hinder the movement of the legs. The legs feature a wider range of motion than before; the arm beam gun is equipped with a gimmick that extends when the wrist is pushed down. The neckline parts are movable, and the container is equipped with a gimmick that widens the fin funnel to make it resemble a wing.
The Advanced MS Joint allows you to maintain the shape of the fin funnel when shooting, and various weapons and interchangeable hands are included too. Get this amazing kit for yourself -- it's the Hi Nu you deserve!
Amuro Ray's NU Gundam gets an RG kit release from Bandai!
Its distinctive colors are carefully reproduced, including three shades of light gray to increase the visual depth. The shoulder and abdomen joints are fully flexible to give it increased posability, and the shoulder armor can also flex with more dynamic posing. The leg armor can slide with the movement of each joint, too.
It's fully armed with its beam rifle, hyper bazooka, missiles and more - order it today!
The Entry Grade of the Nu Gundam is finally here!
It possesses a wide range of articulation, so after a simple assembly you'll be able to create your very own unique Gunpla display!
Order now!
The Sazabi now joins the SD Gundam EX model-kit lineup from Bandai!
He's highly posable after assembly with his 3mm joints, and he's armed with his beam hot rifle, beam tomahawk and shield. Display together with the SD Gundam EX Nu Gundam to recreate Char's legendary battle with Amuro.
Order yours now!
The Nu Gundam now joins the SD Gundam EX model-kit lineup from Bandai!
He's highly posable after assembly with his 3mm joints, and he's armed with his beam rifle, beam saber and shield. Display together with the SD Gundam EX Sazabi to recreate Amuro's legendary battle with Char Aznable
Order yours now!
The MG 1/100 Sazabi Ver. Ka special coating is a limited edition Gunpla from Gundam Base, the official Gunpla facility for Gunpla fans around the world!
The Gundam Base Limited Special Coating Ver uses plating and metallic molding colors in various parts.
Order this amazing Gunpla for yourself today!
![EG 1/144 RX-93 NU GUNDAM [SOLID CLEAR] - ICHIBAN KUJI PRIZE G](//jfc.sg/cdn/shop/files/EG-NU-SOLID-CLEAR-KUJI-G-0.jpg?v=1734636375&width=645)
![EG 1/144 RX-93 NU GUNDAM [SOLID CLEAR] - ICHIBAN KUJI PRIZE G](//jfc.sg/cdn/shop/files/EG-NU-SOLID-CLEAR-KUJI-G-1.jpg?v=1734636375&width=645)
![EG 1/144 RX-93 NU GUNDAM [SOLID CLEAR] - ICHIBAN KUJI PRIZE G](http://jfc.sg/cdn/shop/files/EG-NU-SOLID-CLEAR-KUJI-G-0.jpg?v=1734636375&width=645)
![EG 1/144 RX-93 NU GUNDAM [SOLID CLEAR] - ICHIBAN KUJI PRIZE G](http://jfc.sg/cdn/shop/files/EG-NU-SOLID-CLEAR-KUJI-G-1.jpg?v=1734636375&width=645)
