Gundam (Franchise)
BANDAI HG 1/144 SWORD IMPULSE GUNDAM
Fantastic high-grade injection plastic kit of the Sword Impulse Gundam will be great fun to build up. Parts molded all in colour mean you don't need to paint it; and all the parts snap neatly together, so no glue is required, either. Stickers for detail are included; and polycaps at the joints mean the finished model will be poseable. The completed model can also transform, separating the Core Splendor, Leg Flyer, and other parts.
$26.90$22.90
BANDAI RG 1/144 RX-93 NU GUNDAM
Amuro Ray's NU Gundam gets an RG kit release from Bandai! Its distinctive colors are carefully reproduced, including three shades of light gray to increase the visual depth. The shoulder and abdomen joints are fully flexible to give it increased posability, and the shoulder armor can also flex with more dynamic posing. The leg armor can slide with the movement of each joint, too. It's fully armed with its beam rifle, hyper bazooka, missiles and more - order it today!
$70.90$61.90
FLAMING SNOW MG-61 | 1/100 DESTINY GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW HG-01 | 1/144 METEOR UNIT FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90
BANDAI SD GUNDAM EX STANDARD 00 GUNDAM
Bandai brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them! Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
$11.90$9.90
BANDAI RG 1/144 JUSTICE GUNDAM
Bandai's Real Grade Justice Gundam keeps the excellence of the series going with an amazingly detailed kit complete with opening hatches, effect parts, and so many markings. Justice Gundam can also be mounted onto his backpack securely thanks to Bandai's great design for the feet.
$41.90$36.90
BANDAI EG 1/144 RX-93 NU GUNDAM
The Entry Grade of the Nu Gundam is finally here! It possesses a wide range of articulation, so after a simple assembly you'll be able to create your very own unique Gunpla display! Order now!
$17.90$14.90
BANDAI MG 1/100 β SWORD IMPULSE GUNDAM
Shinn Asuka's Sword Impulse Gundam made its flashy introduction in the first episode of the "Mobile Suit Gundam Seed Destiny," and now is offered as this much-anticipated Master Grade kit! Utilizing the same hyper-detailed and extremely well-articulated body frame from MG Force Impulse Gundam, the Mobile Suit comes packed with its Sword Silhouette to complete Sword Impulse Gundam. Sharply molded in color, the transformable Impulse Gundam is formed by three main parts: Chest Flyer, Core Splendor, and Leg Flyer. Core Splendor's cockpit can be opened to insert an in-scale sitting pilot figure. In addition, landing gear are provided for both the Chest Flyer and Leg Flyer as a original gimmick that's never seen in the anime! The Sword Silhouette pack carried by the Silhouette Flyer can be attached to the back of the Mobile Suit to form Sword Impulse Gundam.
$74.90$65.90
DDB CORGI HG 1/144 DISPLAY STAND FOR IMMORTAL JUSTICE GUNDAM (BLACK)
Beautify your display setup with this effect accessory set, specially crafted for HG 1/144 IMMORTAL JUSTICE GUNDAM! Model kit is not included.
$8.90$6.90
FLAMING SNOW PG UNLEASHED 1/60 RX-78-2 GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HG 1/144 BLITZ GUNDAM
To coincide with the 10th anniversary of Gundam Seed Bandai has rereleased this hugely popular HG kit of the Blitz Gundam in a 'remastered' color reflecting those seen on the upcoming Blu-ray release. A stand attachment and marking stickers are also included in this special release.
$23.90$19.90
BANDAI HG 1/144 GUNNER ZAKU WARRIOR
Very sharp, high-grade injection-plastic kit of the Gunner Zaku Warrior. Molded all in colour and with snap-fit assembly, so no glue or paint are required. Foil stickers are included for extra detail. Includes, of course, plenty of weaponry: MMI-M633 Beam Assault Rifle; Hand Grenades; Shield; Beam Tomahawk; and the "Gunner Wizard" pack with high-energy beam gun thingy that it carries around. Naturally polycaps are included for the joints, so you can pose it however you like! Cables for the Gunner Wizard are included. Order it now!
$22.90$19.90
BANDAI MG 1/100 NU GUNDAM VER. KA
Bandai's big Gunpla release of 2012 is old fan favorite Nu Gundam as drawn by famous Gundam artist Hajime Katoki. The original Master Grade Nu Gundam released way back in 2001 and a lot has changed in Gunpla engineering and the new Nu Gundam Ver Ka is an excellent example of just how far Bandai have come. Key features of the Nu include an all non-ABS plastic frame making it lighter, hidden green psycho frame that is exposed when certain sections of the armor seperate, the ability to take Bandai's LED to light up the head, water-slide decals for markings, and the option to build it as a twin Fin Funnel set up!
$115.90$101.90
BANDAI MG 1/100 BUSTER GUNDAM
Another great SEED Master Grade suit from Bandai! Buster is his big self complete with those massive guns he sports on his back, which can also connect together to make an even bigger weapon! Thanks to the amazing design of the weapon arms attached to Buster's hips he can hold those massive weapons in a variety of poses all day long.Stand not included.
$65.90$57.90
BANDAI MG 1/100 BLITZ GUNDAM
The MG Blitz Gundam is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe. Stand not included.
$65.90$57.90
BANDAI MG 1/100 MSN-04 SAZABI VER. KA
Sazabi Ver. Ka gets the Master Grade treatment! Highly detailed and articulated snapfit kit molded in multiple colors.
$148.90$130.90
FLAMING SNOW RG-32 | 1/144 NU GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-51 | 1/144 EPYON FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-11 | 1/100 PROVIDENCE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-41 | 1/100 NU GUNDAM VER. KA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HG 1/144 EDM-GB GUNDVOLVA
From "Mobile Suit Gundam: The Witch from Mercury" comes an HG kit of the Gundvolva! Ball joints at the neck and waist are spaced to allow for a forward and backward leaning posture. A beam saber grip and beam rifle magazine can be stored behind the shield. The side armor has a movable axis and ball joints to ensure a movable range of motion at the waist. The beam rifle can be attached to and detached from the leg. Get yours today!
$24.90$20.90
BANDAI MG 1/100 RX-78-2 GUNDAM VER. 3.0
MG moves to Version 3.0 with this kit of the ever-popular RX-78-2! With even greater articulation and posability than earlier versions, the Ver. 3.0 kit features a new dynamic armor system that works with the inner frame to create even better movement and positioning. An amazingly engineered snapfit kit molded in multiple colors, with excellent peel-off stick-on markings.
$74.90$65.90
BANDAI HGUC 1/144 UNICORN GUNDAM 02 BANSHEE NORN (DESTROY MODE)
The spectacular Banshee Norn Destroy Mode from "Gundam Unicorn" is molded in color, is posable after assembly, and features some clear parts and stickers for detail. Order yours now!
$33.90$29.90
BANDAI HG 1/144 MD-0064 DARILBALDE
The red-armored Darilbalde from "Mobile Suit Gundam: The Witch of Mercury" now joins the HG model kit series from Bandai! The brilliance of the shell unit is expressed with clear parts and stickers; beam parts can be attached to the hands by changing the tips from the elbows of both arms. The beam javelins are separated at the center, and can be used as individual weapons. In addition, the effect parts on both ends can be attached and detached. Lots of optional parts, such as a base for display, are included too. Order yours now!
$32.90$28.90
