Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Perfect for displaying small plastic models, the 6th model of Action Base now comes in a two piece set!
The base parts are approximately 90mm x 60mm.
Includes 2 sets of 3x prop parts.
The tip can be customized with either a shaft-connecting joint or a C-type arm.
[Accessories]:
Base parts x 2
Pillar parts x 2
C type arm x 2
Joint parts x 1 set
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
