Gundam (Franchise)

The Master Grade version of Char's customised shiny red Z'Gok is here! The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series. The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. All in all, a superb kit of an incredibly cool machine!

Read more less

Based upon the RMS-106 Hizack, the Hobby Hizack is a mobile suit designed for civilians. As more advanced mobile suits became available for the Earth Federation Forces over time, older suits like the Hizack weren't needed any longer. As a result, several Hizacks were modified for civilian use and sold on the open market. These Hobby Hizacks were stripped of their weaponry and had different armor than the standard unit. It however retained its speed and maneuverability, leading to the Hobby Hizack being designated as a "sports" machine.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Bandai Brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them!  Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!

Read more less

Bandai marks the 10th release in their Real Grade line with the mighty Zeta Gundam. In the anime, and in MG and PG kit forms, the Zeta transforms into its Wave Rider form and the big question being asked when Bandai announced an RG Zeta was if it would a transforming kit. And it is! Bandai's RG MS Advanced Joint frame took 1/144 scale kits to a whole new level and the Zeta raises the bar again thanks to the amazing transformation engineering. Like previous RGs the Zeta features various armor color tones as well as an abundance of marking stickers but this guy can transform!

Read more less

From the latest in the Gundam series "Mobile Suit Gundam: The Witch from Mercury", Tickbalang, which can carry MS such as Zowort, has been transformed in HG! The footrest can be stored and deployed by sliding it. Combined with an action base (sold separately), it can be displayed while towing the MS. Can be combined with other "The Witch from Mercury" plastic model series including "HG 1/144 Zowort".

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Miorine Rembran from "Mobile Suit Gundam: The Witch From Mercury" gets a new "Figure-rise Standard" action figure model kit from Bandai! She comes with three interchangeable facial expressions, as well as waterslide decals to create your own; her distinctive hairstyle is also faithfully recreated. The back part of her hair is movable, too. Her uniform is molded in color, and the markings on the shoulders and chest are recreated with stickers. Her leg joints ensure a wide range of motion while still keeping her silhouette natural, and she comes with barefoot parts; interchangeable hands are also included. She also comes with her watering can and shovel! A display base is also included. Order her for your own collection today![Includes]: Interchangeable facial expressions (x3) Interchangeable hands (x1 set) Barefoot parts (left and right, x1 each) Watering can Shovel Stickers Waterslide decals Display base

Read more less

Suletta Mercury from "Mobile Suit Gundam: The Witch From Mercury" now joins Bandai's "Figure-rise Standard" action figure model kit lineup! She comes with three interchangeable facial expressions, as well as water-transfer decals to create your own; her uniform is molded in color, and the patterns on her collar and the chest of the uniform are recreated with stickers. Her hairstyle is wonderfully created, and her leg joints allow a wide range of motion while keeping her silhouette as natural as possible. The uneven wrinkles on her boots are also very well done! Her Haro is included, and its "ears" can be opened and closed, as are interchangeable hands (including a pair to hold the Haro). Order this new Gundam heroine for your own collection today! [Includes]: Haro Interchangeable facial expressions (x3) Interchangeable hands (x1 set) Display base Stickers (x2 types) Water-transfer decals

Read more less

Cyclases's Schwalbe Custom from "Mobile Suit Gundam: Iron-Blooded Orphans Urdr Hunt" joins the HG model-kit lineup from Bandai! The vernier block attached to the rear skirt rotates in two places, and can be removed as well. Its signature weapons -- two handguns and a shield -- are included too. It'll be fully posable after assembly, too. Order yours now!

Read more less

The Master Grade (MG) RGC-80 GM Cannon (North American Front) is a 1/100 scale kit released in 2015, as a Bandai Hobby Online Shop exclusive. Add it to your collection today!

Read more less

The Nemo Unicorn is now available in the 1/100 scale! This variation with Desert Color makes it a unique piece for your collection, get yours today!

Read more less

Cagalli Yula Athha from "Gundam Seed Freedom" makes this acrylic pen stand from Plex something you'll want to have in your collection, or on your desk! Order yours today! [Size]: Approximately 10cm high [Materials]: Acrylic

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

From the newly announced anime "Gundam Build Fighters: GM's Counterattack," here's the new Gundam featured in the show! It's fully posable after assembly, molded in color so painting isn't necessary, and it comes with four sets of hands, two beam sabers, a gun and shield. Don't miss out on this new addition to the Gundam lineup! 

Read more less

The most impressive model in Bandai's history is finally here! This kit has too much to list in detail, so please be willing to settle for the highlights:30-plus runners of parts (670 total pieces). About 30 locations secured by metal screws. Two different locations (eyes and chest) light up on the finished kit. Full inner mechanism detail on all limbs. Opening panels on the head, chest, and more. Fingers are individually jointed. Comes with two beam sabers and two huge beam rifles. Locking systems provide stability so things don't flap around like they tend to do on the Master Grade kit. Comes boxed in three separate inner boxes plus a special box that contains the 14 individual "feathers" made from plastic-coated thin metal, plus the metal joint parts, screws, and other goodies. Two separate manuals are included. The first, the INSTRUCTION manual (text is in Japanese), has numerous photos of the kit in various construction steps plus painting guide, history of the unit and the Battle Zero unit, cross sections, and an interview with the designer of the kit. The second, the CONSTRUCTION manual, has the actual assembly instructions and details. No English text but the diagrams are self-explanatory.This is a very complex model kit and, as our "Skill Level 4" rating indicates, is not recommended for beginner modelers.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less