Gundam (Franchise)
BANDAI HG 1/144 GUNDAM ASTRAY RED FRAME
Lovely HG Gundam Astray Red Frame features parts molded in color, and snap-fit assembly, making it a breeze to get this poseable mech into action! The sword blade is made of 'meki' parts -- nicely chromed for that metallic look! Stickers are included for detail. Order yours today!
$23.90$19.90
PREMIUM BANDAI RG 1/144 GUNDAM ASTRAEA PARTS SET FOR RG GUNDAM EXIA
*This is the weapons and parts set of Astraea that allows to form the RG 1/144 Gundam Astraea by assembling with RG 1/144 Gundam Exia (*sold separately) *This product along with ”pre-assembled” “RG 1/144 Gundam Exia” (sold separately) are required in order to form Gundam Astraea. Get yours today!
$64.90$55.90
BANDAI HGUC 1/144 RX-93 NU GUNDAM
Nu Gundam is finally offered in Bandai's HGUC line, and what a superb kit this turned out to be! Sharply detailed and molded in color, this snap-fit kit of Amuro Ray's last piloted Mobile Suit in "Char's Counterattack" features polycap-jointed articulation and is fully equipped with two types of beam sabers, a beam rifle, a new hyper bazooka, and of course, its distinctive fin funnels that are detachable from its back and can be set in firing mode. Stickers are provided to add detail to the completed model.
$41.90$36.90
FLAMING SNOW MG-31 | 1/100 00 GUNDAM SEVEN SWORD FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI MG 1/100 00 RAISER
One of the more popular suits in the Gundam universe, the 00 Raiser is now a Master Grade! This kit comes with its GN drives, which will be able to house an LED (one LED will be included with the kit, but another 4 will be needed to light up everything; 1 for the head, 2 for the GN Drives and 2 more for the Raiser). With the 00 Gundam and the 0 Raiser, it's like two kits in one box! All the weapons that make the 00 Raiser so intimidating, such as the GN Sword II and the GN Sword III are included, too! Stand not included.
$108.90$92.90
BANDAI HGUC 1/144 MSN-04 SAZABI (METALLIC COATING)
Last piloted by Char Aznable in "Char's Counterattack," the sizzlin' Sazabi now joins Bandai's HGUC series as a superbly detailed snap-fit plastic kit! Molded in a brilliant Metallic Coating color, the Sazabi will be fully poseable with polycap joints upon completion. Its features include a movable mono eye and openable funnel containers, and this Mobile Suit is fully equipped with 12 funnels (six in storage mode and six in deployed mode), a beam shot rifle, two beam sabers, a shield, and a beam tomahawk with two optional beam parts. Stickers for its mono eye and markings are provided. Get yours now!
$90.90$79.90
BANDAI MG 1/100 CHAR'S Z'GOK
The Master Grade version of Char's customised shiny red Z'Gok is here! The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series. The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. All in all, a superb kit of an incredibly cool machine!
$49.90$43.90
PREMIUM BANDAI HG 1/144 HOBBY HI-ZACK (A.O.Z RE-BOOT VER.)
Based upon the RMS-106 Hizack, the Hobby Hizack is a mobile suit designed for civilians. As more advanced mobile suits became available for the Earth Federation Forces over time, older suits like the Hizack weren't needed any longer. As a result, several Hizacks were modified for civilian use and sold on the open market. These Hobby Hizacks were stripped of their weaponry and had different armor than the standard unit. It however retained its speed and maneuverability, leading to the Hobby Hizack being designated as a "sports" machine.
$43.90$37.90
FLAMING SNOW HG-03 | 1/144 ATLAS GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW HG-50 | 1/144 RX-78-2 GUNDAM (CUCURUZ DOAN'S ISLAND VER) FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI SD GUNDAM EX STANDARD RX-78-2 GUNDAM
Bandai Brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them! Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
$11.90$9.90
BANDAI RG 1/144 ZETA GUNDAM
Bandai marks the 10th release in their Real Grade line with the mighty Zeta Gundam. In the anime, and in MG and PG kit forms, the Zeta transforms into its Wave Rider form and the big question being asked when Bandai announced an RG Zeta was if it would a transforming kit. And it is! Bandai's RG MS Advanced Joint frame took 1/144 scale kits to a whole new level and the Zeta raises the bar again thanks to the amazing transformation engineering. Like previous RGs the Zeta features various armor color tones as well as an abundance of marking stickers but this guy can transform!
$49.90$43.90
BANDAI HG 1/144 TICKBALANG
From the latest in the Gundam series "Mobile Suit Gundam: The Witch from Mercury", Tickbalang, which can carry MS such as Zowort, has been transformed in HG! The footrest can be stored and deployed by sliding it. Combined with an action base (sold separately), it can be displayed while towing the MS. Can be combined with other "The Witch from Mercury" plastic model series including "HG 1/144 Zowort".
$22.90$19.90
FLAMING SNOW HG-45 | 1/144 WING GUNDAM ZERO FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-74 | 1/100 EPYON FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-27-1 | 1/144 UNICORN GUNDAM 02 BANSHEE NORN (FINAL BATTLE VER.) FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI FIGURE-RISE STANDARD MIORINE REMBRAN
Miorine Rembran from "Mobile Suit Gundam: The Witch From Mercury" gets a new "Figure-rise Standard" action figure model kit from Bandai! She comes with three interchangeable facial expressions, as well as waterslide decals to create your own; her distinctive hairstyle is also faithfully recreated. The back part of her hair is movable, too. Her uniform is molded in color, and the markings on the shoulders and chest are recreated with stickers. Her leg joints ensure a wide range of motion while still keeping her silhouette natural, and she comes with barefoot parts; interchangeable hands are also included. She also comes with her watering can and shovel! A display base is also included. Order her for your own collection today![Includes]: Interchangeable facial expressions (x3) Interchangeable hands (x1 set) Barefoot parts (left and right, x1 each) Watering can Shovel Stickers Waterslide decals Display base
$51.90$44.90
BANDAI FIGURE-RISE STANDARD SULETTA MERCURY
Suletta Mercury from "Mobile Suit Gundam: The Witch From Mercury" now joins Bandai's "Figure-rise Standard" action figure model kit lineup! She comes with three interchangeable facial expressions, as well as water-transfer decals to create your own; her uniform is molded in color, and the patterns on her collar and the chest of the uniform are recreated with stickers. Her hairstyle is wonderfully created, and her leg joints allow a wide range of motion while keeping her silhouette as natural as possible. The uneven wrinkles on her boots are also very well done! Her Haro is included, and its "ears" can be opened and closed, as are interchangeable hands (including a pair to hold the Haro). Order this new Gundam heroine for your own collection today! [Includes]: Haro Interchangeable facial expressions (x3) Interchangeable hands (x1 set) Display base Stickers (x2 types) Water-transfer decals
$51.90$44.90
BANDAI HG 1/144 CYCLASE'S SCHWALBE CUSTOM
Cyclases's Schwalbe Custom from "Mobile Suit Gundam: Iron-Blooded Orphans Urdr Hunt" joins the HG model-kit lineup from Bandai! The vernier block attached to the rear skirt rotates in two places, and can be removed as well. Its signature weapons -- two handguns and a shield -- are included too. It'll be fully posable after assembly, too. Order yours now!
$27.90$23.90
PREMIUM BANDAI MG 1/100 GM CANNON (NORTH AMERICAN FRONT)
The Master Grade (MG) RGC-80 GM Cannon (North American Front) is a 1/100 scale kit released in 2015, as a Bandai Hobby Online Shop exclusive. Add it to your collection today!
$62.90$54.90
PREMIUM BANDAI MG 1/100 NEMO UNICORN (DESERT COLOR VER.)
The Nemo Unicorn is now available in the 1/100 scale! This variation with Desert Color makes it a unique piece for your collection, get yours today!
$47.90$41.90
PLEX CAGALLI YULA ATHHA ACRYLIC PEN STAND (GUNDAM SEED FREEDOM)
Cagalli Yula Athha from "Gundam Seed Freedom" makes this acrylic pen stand from Plex something you'll want to have in your collection, or on your desk! Order yours today! [Size]: Approximately 10cm high [Materials]: Acrylic
$20.90$17.90
FLAMING SNOW MG-69 | 1/100 CROSSBONE GUNDAM X-1 FULL CLOTH FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
FLAMING SNOW MG-105 | 1/100 GINN FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
