Free delivery for purchases above $50

Model Kits and Accessories

569 products


  • Last stock! PG 1/60 UNICORN GUNDAM 2 BANSHEE NORN PG 1/60 UNICORN GUNDAM 2 BANSHEE NORN

    BANDAI PG 1/60 UNICORN GUNDAM 2 BANSHEE NORN

    1 stock remaining!

    The PG Banshee Norn shares the same frame with the PG Unicorn Gundam but instead of the Unicorn's Gatlings and Bazooka you get that massive Norn backpack as well as the giant shield and parts to make the launcher for the rifle. The Banshee comes with that giant display base and Detron stickers for markings. Get this remarkable kit for yourself now!

    1 stock remaining!

    $369.90$319.90

  • HGBF 1/144 WING GUNDAM ZERO HONOO HGBF 1/144 WING GUNDAM ZERO HONOO

    BANDAI HGBF 1/144 WING GUNDAM ZERO HONOO

    Kouen Yusei's customized XXXG-00W00 Wing Gundam Zero from "Gundam Build Fighters Honoo" (a "Gundam Build Fighters" side story photo novel), the Wing Gundam Zero Honoo, joins Bandai's HGBF lineup! It includes the Hyper Caletvwich, the twin buster rifle and a shield that can store its beam saber. Build to fight! 

    $30.90$26.90

  • HGBF 1/144 STAR BURNING GUNDAM HGBF 1/144 STAR BURNING GUNDAM

    BANDAI HGBF 1/144 STAR BURNING GUNDAM

    From the newly announced anime "Gundam Build Fighters: GM's Counterattack," here's the new Gundam featured in the show! It's fully posable after assembly, molded in color so painting isn't necessary, and it comes with four sets of hands, two beam sabers, a gun and shield. Don't miss out on this new addition to the Gundam lineup! 

    $27.90$23.90

  • HG 1/144 BLAZING GUNDAM HG 1/144 BLAZING GUNDAM

    BANDAI HG 1/144 BLAZING GUNDAM

    The Gundam Breaker Batlog Project, linking Gundam and games, will be launched worldwide this summer! Original mecha from this project are now being released as HG model kits from Bandai, able to be customized just like in the game! Blazing Gundam is customized with the concept of God Gundam's "brother" machine, and is inspired by "brother" pairs such as Rising Gundam and Shining Gundam. The joints allow for a wide range of movement, and emerald-green foot parts are included for its special foot attack technique! It's also equipped with a pair of beam tonfas, with clear green parts. This kit can be built with a maskless head if you prefer as well. Enter a new day of "Gundam" and order yours now!

    $34.90$29.90

  • RG-24-1 | 1/144 GUNDAM ASTRAY GOLD FRAME AMATSU HANA FLUORESCENT WATERSLIDE DECAL RG-24-1 | 1/144 GUNDAM ASTRAY GOLD FRAME AMATSU HANA FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW RG-24-1 | 1/144 GUNDAM ASTRAY GOLD FRAME AMATSU HANA FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $6.90$5.90

  • MGEX-63 | 1/100 UNICORN GUNDAM VER.KA FLUORESCENT WATERSLIDE DECAL MGEX-63 | 1/100 UNICORN GUNDAM VER.KA FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW MGEX-63 | 1/100 UNICORN GUNDAM VER.KA FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $8.90$7.90

  • MG-19 | 1/100 ZZ GUNDAM VER.KA FLUORESCENT WATERSLIDE DECAL MG-19 | 1/100 ZZ GUNDAM VER.KA FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW MG-19 | 1/100 ZZ GUNDAM VER.KA FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $7.90$6.90

  • MG-116 | 1/100 UNICORN GUNDAM PERFECTIBILITY FLUORESCENT WATERSLIDE DECAL MG-116 | 1/100 UNICORN GUNDAM PERFECTIBILITY FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW MG-116 | 1/100 UNICORN GUNDAM PERFECTIBILITY FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $7.90$6.90

  • MG-FA78 | 1/100 FULL ARMOR GUNDAM FLUORESCENT WATERSLIDE DECAL MG-FA78 | 1/100 FULL ARMOR GUNDAM FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW MG-FA78 | 1/100 FULL ARMOR GUNDAM FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $8.90$7.90

  • MG 1/100 NEMO UNICORN (DESERT COLOR VER.) MG 1/100 NEMO UNICORN (DESERT COLOR VER.)

    PREMIUM BANDAI MG 1/100 NEMO UNICORN (DESERT COLOR VER.)

    The Nemo Unicorn is now available in the 1/100 scale! This variation with Desert Color makes it a unique piece for your collection, get yours today!

    $51.90$44.90

  • MG 1/100 SINANJU MG 1/100 SINANJU

    BANDAI MG 1/100 SINANJU

    Amazingly detailed and highly articulated snap-together kit of Sinanju! Includes metallic gold accent decals. Display stand not included.  Purchase yours today!

    $123.90$108.80

  • MG 1/100 MS-07B GOUF VER 2.0 MG 1/100 MS-07B GOUF VER 2.0

    BANDAI MG 1/100 MS-07B GOUF VER 2.0

    A Mobile Suit made famous at the hands of ace pilot Lieutenant Ramba Ral, the MS-07B Gouf is a high-performance machine that strikes fear in its opponents with its powerful Heat Saber and Heat Rod at its disposal! This much-anticipated "Version 2.0" update to its 2000-released Master Grade kit not only utilizes the same amazingly detailed and super-poseable inner frame from MG MS-06J Zaku II Ver. 2.0, Bandai went a step further in enhancing the inner frame to allow for wider range of posing possibilities and smoother movements! Both the front and side skirt armor parts are linked together so that the side skirt armor will slide back when the front skirt armor is moved upwards so as to not restrict the Mobile Suit's movements. In pursuit of easing the assembly process for modelers, Bandai came up with an ingenious method of molding each individual section of the pipe cover in straight rows on the plastic runner so you can easily insert the power pipe through each row of pipe covers and snap each of them off without having to individually cut and slide each piece to the power pipe! That'll shave off at least a few minutes of assembly time! Its signature weaponry includes a shield, a Heat Saber, a Heat Rod, and a Finger Vulcan for its left hand. A regular manipulator left hand is also included to replace the Finger Vulcan if you so desire. Each section of the Heat Rod is ball-jointed so you can bend it into any shape you want! The blade part of the Heat Saber is made of clear orange, and the Mobile Suit's cockpit can slide open to reveal a sitting-pose pilot figure (molded in light blue). Also packed in the set are in-scale figures (molded in light blue) of Ramba Ral and his aide Crowley Hamon. A sheet of stickers and dry-transfer markings are included.

    $63.90$55.90

  • HGUC 1/144 GELGOOG CHAR CUSTOM HGUC 1/144 GELGOOG CHAR CUSTOM

    BANDAI HGUC 1/144 GELGOOG CHAR CUSTOM

    Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet! Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. Order yours now!

    $26.90$22.90

  • HG 1/144 SIGRUN HG 1/144 SIGRUN

    BANDAI HG 1/144 SIGRUN

    The Sigrun (or Siegrune) from "Mobile Suit Gundam: Iron-Blooded Orphans G" joins the HG model-kit lineup from Bandai! This game-original Gundam comes with its Valkyrie Rapier and Valkyrie Round Shield are included, as well as interchangeable hands to hold them with. It's fully posable after assembly, so you can reproduce all your favorite scenes from the game. Place your order today!

    $27.90$23.90

  • Last stock! HG 1/144 CYCLASE'S SCHWALBE CUSTOM HG 1/144 CYCLASE'S SCHWALBE CUSTOM

    BANDAI HG 1/144 CYCLASE'S SCHWALBE CUSTOM

    1 stock remaining!

    Cyclases's Schwalbe Custom from "Mobile Suit Gundam: Iron-Blooded Orphans Urdr Hunt" joins the HG model-kit lineup from Bandai! The vernier block attached to the rear skirt rotates in two places, and can be removed as well. Its signature weapons -- two handguns and a shield -- are included too. It'll be fully posable after assembly, too. Order yours now!

    1 stock remaining!

    $27.90$23.90

  • HG-41 | 1/144 NIGHTINGALE FLUORESCENT WATERSLIDE DECAL HG-41 | 1/144 NIGHTINGALE FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW HG-41 | 1/144 NIGHTINGALE FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $7.90$6.90

  • HG-50 | 1/144 RX-78-2 GUNDAM (CUCURUZ DOAN'S ISLAND VER) FLUORESCENT WATERSLIDE DECAL HG-50 | 1/144 RX-78-2 GUNDAM (CUCURUZ DOAN'S ISLAND VER) FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW HG-50 | 1/144 RX-78-2 GUNDAM (CUCURUZ DOAN'S ISLAND VER) FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $6.90$5.90

  • MG 1/100 GOD GUNDAM MG 1/100 GOD GUNDAM

    BANDAI MG 1/100 GOD GUNDAM

    Just when I thought Bandai couldn't do it better - they do! This new kit of the G Gundam features the new "Fighting Action" frame system! This all new design is made from ABS plastic and screws together. The resulting frame is extremely strong and holds positions without the sagging that earlier poly-cap designs suffered from. Plus it is amazingly poseable - the box art shows the mech standing with its arms crossed. We built one here to try it and it is incredible. I actually had it balanced on one leg while doing a sweep kick pose. The rest of the kit is typical Master-Grade quality. All parts are precolored and snap together. Dry transfers for markings. Includes a figure of the pilot - Domon Kasshu. Two sets of hands - one standard and one in clear yellow to replicate the look of the energy ball attack.

    $44.90$38.90

  • Last stock! HGUC 1/144 V2 ASSAULT BUSTER GUNDAM HGUC 1/144 V2 ASSAULT BUSTER GUNDAM

    BANDAI HGUC 1/144 V2 ASSAULT BUSTER GUNDAM

    1 stock remaining!

    This amazing kit enables you to build the V2 Assault, the V2 Buster or the V2 Assault Buster Gundam! Whatever you choose, it'll be armed to the teeth with the Mega Beam Rifle, Mega Beam Shield, Beam Rifle, V2 Core Fighter, Assault parts and Buster parts. Molded in white, dark gray, blue red, metallic yellow and yellow, with foil stickers for markings.

    1 stock remaining!

    $33.90$29.90

  • HG 1/144 GUNDAM LFRITH THORN HG 1/144 GUNDAM LFRITH THORN

    BANDAI HG 1/144 GUNDAM LFRITH THORN

    The Lfrith Thorn from "Mobile Suit Gundam: The Witch from Mercury" joins Bandai's "HG" model-kit series! Its characteristic large backpack is included, as are its exclusive weapon and shield. Order it for your own collection today!

    $27.90$23.90

  • HG 1/144 GUNDAM LFRITH UR HG 1/144 GUNDAM LFRITH UR

    BANDAI HG 1/144 GUNDAM LFRITH UR

    The Lfrith Ur from "Mobile Suit Gundam: The Witch from Mercury" is now part of Bandai's "HG" model-kit series! It comes with its characteristic large backpack, special weapons and beam saber. Order it for your own collection today!

    $32.90$28.90

  • RG-18 | 1/144 00 RAISER (ORIGINAL/TRANS-AM) FLUORESCENT WATERSLIDE DECAL RG-18 | 1/144 00 RAISER (ORIGINAL/TRANS-AM) FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW RG-18 | 1/144 00 RAISER (ORIGINAL/TRANS-AM) FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $6.90$5.90

  • MG-74 | 1/100 EPYON FLUORESCENT WATERSLIDE DECAL MG-74 | 1/100 EPYON FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW MG-74 | 1/100 EPYON FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $6.90$5.90

  • MG-31 | 1/100 00 GUNDAM SEVEN SWORD FLUORESCENT WATERSLIDE DECAL MG-31 | 1/100 00 GUNDAM SEVEN SWORD FLUORESCENT WATERSLIDE DECAL

    FLAMING SNOW MG-31 | 1/100 00 GUNDAM SEVEN SWORD FLUORESCENT WATERSLIDE DECAL

    Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

    $6.90$5.90

© 2024 JFC., All rights reserved 2023

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account