At long last the Banshee has arrived! Similar to its predecessor, the Unicorn Gundam, the Banshee has a psycho frame this time in gold but the headgear is slightly different.
He also comes with weapons which mount to his forearms for extra firepower.
Designated with the number of the beast, NZ-666 Kshatriya is one devastatingly powerful Mobile Suit that's to be feared especially when it is equipped with multiple beam cannons on its chest and binders, as well as 24 funnels and four hidden arms underneath the binders.
Nicknamed "The Sleeved," the Mobile Suit piloted by Neo-Zeon ace pilot Marida Cruz is represented in sharp detail as this snap-fit plastic kit model with parts molded in color and will stand 15.5cm tall upon completion. Its four binders are movable and feature a locking mechanism on each binder for maintaining them in fixed poses.
There are six funnels underneath each binder along with a flexible arm. Includes two beam sabers and a sheet of foil stickers.
The classic RX-78-02 enters the HG line anew with a version of the kit based off its appearance in "Gundam The Origin!" A perfect way to kick off the new year celebrating Gundam's 40th anniversary.
Thanks to the provided option parts, you can build either the early or mid version of the RX-78-02.
The early version features asymmetrical left and right sides and includes a gatling gun equipped on the forearm. The left and right shoulders feature a Shoulder Magnum and Vulcan canon respectively, contributing to the asymmetrical look.
For the mid version, both sides are symmetrical, including the shoulders which are built with flat panels instead of weaponry.
Adjustable vernier are also included on the backs of the calves, with a cover that lets you display or hide the features. The toe tips are articulated, too.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Mobile Suit Gundam SEED title series celebrates its 20th anniversary with the release of the MS set in 1/144 Gunpla series!
The set includes the RG 1/144 Freedom Gundam, RG 1/144 Justice Gundam, and HG 1/144 Providence Gundam. Each model is presented in metallic moldings, and comes complete with a triple action base to securely hold each Gunpla in position after it is assembled.
Order this amazing set of Gunpla for yourself today!
The MG 1/100 Sazabi Ver. Ka special coating is a limited edition Gunpla from Gundam Base, the official Gunpla facility for Gunpla fans around the world!
The Gundam Base Limited Special Coating Ver uses plating and metallic molding colors in various parts.
Order this amazing Gunpla for yourself today!
Shen Long has joined the MG lineup!
Shen Long comes with its most cool Dragon Fang attachment and also his shield and Beam Trident which can attach to its backpack when he's on the move. Shen Long also comes with foil stickers, dry transfers and marking stickers.
Stand not included.
This Master Grade model kit of the Sinanju Stein, as seen in "Mobile Suit Gundam Narrative," features an updated design!
The engraving on the Sleeves emblem is divided into parts for ease of assembly; the beam axe can be connected and equipped as a long-beam naginata, and the beam parts can also be deployed while attached to the shield. Emotion Manipulator SP is used for the hand parts, and each finger can move independently!
The flexible leg thrusters can be moved independently with their lift arms; the cockpit can open and close, and the vertical movement of the chest block can also be reproduced. Two figures of Zoltan Akkanen are included: sitting and standing.
Order this incredible Gundam for your own collection today!
[Includes]:
Shield
High beam rifle
Grenade launcher
Beam axe (x2)
Bazooka
Beam saber (x2)
Effect parts (x1 set)
Interchangeable hands (x1 set)
Figures (x2)
Joint parts (x1 set)
Stickers
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Gundam Caliburn from "Mobile Suit Gundam: The Witch From Mercury" is now a "SD Gundam Cross Silhouette" model kit from Bandai! Parts to duplicate the rainbow-colored shine that covers the whole body shell when the Permet Score exceeds 8 are included; the non-emitting shell unit is reproduced with smoked black parts, and the red shell unit representing Permit Score 5 is also reproduced with stickers!
You can use the SD frame or the CS frame into the upper body to select your favorite head and body shape. Interchangeable hands including hands for holding weapons, and flat hands.
The bit-on form that attaches the bit stave to the body is also reproduced, and the quadra thruster at the rear of the variable rod rifle can be opened and closed. The legs have movable parts that can be transformed into high maneuver mode, too!
Order it for your own collection today!
[Includes]:
Variable rod rifle
Escutcheon
Beam saber (grip) (x2)
Hand parts (x1 set)
Stickers
Here comes the HG Gundam Ground Type as seen in "Mobile Suit Gundam: The 08th MS Team"!
Its exterior armor parts have been newly molded to recreate the unique look of the Ground Type, including the asymmetrical chest piece. It also features increased mobility, allowing you to recreate it posing on one knee while holding its gun with both hands, and other impressive poses seen in the anime series! The 180mm canon is newly molded, and can be stored inside the wepaon container by replacing certain parts.
Order today!
[Includes]:
180mm canon (x1)
Beam rifle (x1)
100mm machine gun (x1)
Beam saber (x2)
Weapon container rack (x1)
Shield (x1)
Foil sticker sheet
Marking sticker sheet
To observe the 40th anniversary of Gunpla, the Zeong from "Mobile Suit Gundam" has been converted to a Real Grade kit using the latest technology and design!
It features advanced MS joints for smooth and powerful poses; the mono eye can be moved left and right, and up and down as well. The built-in frame features a wider range of movement at the waist than before to allow for more dynamic poses; four verniers on the chest and back are deployed in conjunction with the front-and-back movement of the chest portion.
The interchangeable hand parts are insert-molded for precise details and full flexibility, too! The arm-mounted mega-particle cannon is also included, in separate parts (including the wires).
Get this spectacular new Zeong for your own lineup today!
[Includes]:
Lead wire (red)
Lead wire (black) (x2)
Realistic decals
Display base
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Heindree Sturm, a combat mobile suit made by Grassley Defense Systems in "Mobile Suit Gundam: The Witch from Mercury," is now a 1/144-scale HG model kit from Bandai!
Ball joints at its neck and waist allow natural forward-and-backward tilting poses; it's equipped with a movable special weapon on its back. It also has a special shield on its left arm, which is equipped with a structure enabling it to be turned to the front.
Order yours today!
[Includes]:
Beam rifle
Beam saber
Shield
Stickers
The Sword Impulse Gundam, from Gundam SEED Destiny, is molded in colour and features snap-fit assembly, as well as polycaps at the joints for flexibility. It can break down into the Sword Silhouette, Leg Flyer, Core Splendour, and Chest Flyer.
A clear plastic plate featuring Shinn Asuka and his statsis included as a neat bonus, too.
Get yours now!
The popular 1/100-scale Dom from "Mobile Suit Gundam" has now been upgraded with new molds and part updates!
The waist and arm parts are newly molded; the shape of the arm has been modified so that the connection between the shoulder and the forearm looks more natural, and the elbow joint structure has also been redesigned. A forward swing mechanism is now mounted on the connection between the shoulder and torso for improved posability; the impressive pose of wielding the Giant Buzz has now reduced the interference of each part for smoother posing.
The hip now features a swing joint, too, and the range of motion in the legs has been greatly expanded by adding movable axes to the thigh connection, and updating the waist side armor. The internal frame of the ankles has also been changed to reproduce the Dom's characteristic crouching pose. Weapons such as the Giant Buzz, Raketen Buzz and Sturm Faust are also included.
This one really is "the complete package" -- place your order today!
The most impressive model in Bandai's history is finally here! This kit has too much to list in detail, so please be willing to settle for the highlights:30-plus runners of parts (670 total pieces). About 30 locations secured by metal screws. Two different locations (eyes and chest) light up on the finished kit. Full inner mechanism detail on all limbs. Opening panels on the head, chest, and more. Fingers are individually jointed. Comes with two beam sabers and two huge beam rifles. Locking systems provide stability so things don't flap around like they tend to do on the Master Grade kit. Comes boxed in three separate inner boxes plus a special box that contains the 14 individual "feathers" made from plastic-coated thin metal, plus the metal joint parts, screws, and other goodies. Two separate manuals are included. The first, the INSTRUCTION manual (text is in Japanese), has numerous photos of the kit in various construction steps plus painting guide, history of the unit and the Battle Zero unit, cross sections, and an interview with the designer of the kit. The second, the CONSTRUCTION manual, has the actual assembly instructions and details. No English text but the diagrams are self-explanatory.This is a very complex model kit and, as our "Skill Level 4" rating indicates, is not recommended for beginner modelers.
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](//jfc.sg/cdn/shop/files/hguc-g-ground-type-0.jpg?v=1724749873&width=645)
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](//jfc.sg/cdn/shop/files/hguc-g-ground-type-1.jpg?v=1724749873&width=645)
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](http://jfc.sg/cdn/shop/files/hguc-g-ground-type-0.jpg?v=1724749873&width=645)
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](http://jfc.sg/cdn/shop/files/hguc-g-ground-type-1.jpg?v=1724749873&width=645)
