Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Kira Yamato’s mobile suit Freedom Gundam from the hit series “Gundam Mobile Suit Gundam SEED” and “Mobile Suit Gundam SEED Destiny” gets an updated Master Grade 2.0 release from Bandai!
This new kit has been redesigned with fantastic details and improved articulation! All parts come molded in multiple colors and features a snap fit construction.
Bandai's amazing Master Grade kit of the Providence Gundam from "Gundam Seed" looks fantastic!
It's armed with its MA-M221 Judicium Beam Rifle, the MA-MV05A Composite Armed Shield System, a large dragoon pod, a small dragoon pod, and dragoon effect parts.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Introducing a High Grade kit of Agnes Giebenrath's Gyan Strom from the movie "Mobile Suit Gundam SEED Freedom"!The kit is equipped with a specialized internal structure "SEED Action System" for capturing iconic action poses from the film. It also features enhanced arm articulation thanks to the sliding mechanism in the shoulder armor connection.The distinctive beam axe, designed uniquely for this suit, can be mounted to the waist by swapping in the included storage grip. The movable wings allow you to position the missile launcher forward.By deploying the chest armor and inserting the Gatling parts, you can recreate the Gatling's extended state. It also includes a Heat Rod part that can be equipped on the right arm.Lastly, the Gyan Strom includesh effect parts that can be attached to the shield for added dynamic display options!
Rey Za Burrel's customised Blaze Zaku Phantom, in a terribly manly lilac and pale grey colour scheme, is nevertheless quite striking when completed.
Molded all in colour and featuring snap assembly, this kit also includes stickers for additional detail. Very nice!
Order it now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The distinctive Gundam Astray Gold Frame Amatsu Mina from "Gundam Seed Astray" features beautifully reproduced exterior textures, and the "Maga no Ikutachi" on its back can be expanded and retracted.
It's equipped with the Okitsu no Kagami, the Trikeros Kai, two of the Totsuka no Tsurugi, the Tsumuha no Tachi and two of the Maga no Shirahoko.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Duel Blitz Gundam from "Mobile Suit Gundam Seed Freedom" gets a new "HG" (High Grade) model kit from Bandai!
Yzak Joule's ride is equipped with the internal structure "Seed Action System" that specializes in reproducing impressive action poses from the show; the connecting shafts of the hip joints on both legs can be moved separately left, right, and slide up and down, allowing for bold action poses.
The "Assault Shroud" armor that covers the entire body is removable; the left and right arms are equipped with the Gleipnir and Lancer Dart respectively. The Lancer Dart can be removed and used as a handheld weapon; the Gleipnir comes with a lead wire and can reproduce the injection state. A base is included to support the Gleipnir's claw when fired, too. This kit is also molded in color!
Order it for your own collection today!
[Includes]:
Rifle
Gleipnir
Gleipnir base
Lancer Dart
Beam saber (x2)
Lead wire
Stickers
Introducing the Gundam Barbatos from the groundbreaking "MGSD" series, a new dimension of SD High-End brand that combines the technology of MG (Master Grade) with the SD Gundam framework!
Standing at approximately 115mm tall, the SD-scale rendition of Gundam Barbatos faithfully captures the iconic "Gundam Frame" features. The head and neck can be articulated in four axes, allowing for various dynamic poses such as tilting the chin or looking up towards the sky.
The Barbatos is equipped with a wide range of motion achieved by incorporating movable axes within the torso, enabling swinging from left to right and forward and backward tilting. The movement of the chest is synchronized with the expansion and contraction of the side abdominal cylinders. The shoulder connection utilizes a swing mechanism, enhancing the range of motion for the arms. The cylinder on the elbow moves in tandem with the arm, providing synchronized articulation.
Featuring the unique MGSD original gimmick, pulling down the lower part of the shoulder armor activates the linked expansion of the central armor. The knee armor moves in conjunction with the bending of the legs, while the armor on the back of the knee can move independently without hindering the leg's motion.
The twin eyes are created using a double-layer structure, combining intricately detailed internal parts with clear parts for a stunning visual effect.
MGSD original clear parts with precision-shaped processing, designed to efficiently reflect light, are employed on the chest, knees, and shoulders, introducing a shining technique.
The Barbatos also utilizes the "Real Metallic Gloss Injection" material in glossy injection molding, enhancing the metallic sheen on the fine details.
The backpack allows for mounting a sword, a 300mm smoothbore gun, and a mace. The 300mm smoothbore gun can be transformed into a storage state by extending the barrel and rotating it 180 degrees.
The mace features an MGSD original gimmick where pushing the handle extends the tip and unfolds four blades in synchronized motion.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Justice Gundam from "Gundam Seed" joins the Master Grade kit lineup from Bandai!
The Fatum-00's beam cannon base can be displayed in flight form without any parts swapping, and the Fatum-00 can also be ridden by the Justice Gundam and displayed in flight! The Justice Gundam is armed with one Lupus beam rifle, two Lacerta beam sabers, one Bassel beam boomerang, and the laminated anti-beam shield.
The cockpit opens and closes, and a pilot figure is included; it also comes with stickers and dry-transfer decals for markings.
Strike Freedom Gundam, arguably the most popular mobile suit from the Gundam Seed Destiny anime series, finally gets the Master Grade treatment!
This MG kit of Strike Freedom Gundam comes with the same fantastic detail, high quality, and super posability that MG builders would come to expect from Bandai. Strike Freedom Gundam comes armed with its trademark weaponry including the high energy beam rifles, Super Lacerta beam sabers, beam shield, Xiphias rail guns, and its most distinct and powerful weapon of all, the Super Dragoon mobile weapon wings that can extend and detach from the main wing frames.
As usual, stickers and custom decal markings are provided along with a custom display base.
Bandai brings us a new Gunpla kit from "Gundam Seed" of a 1/144 HGCE Infinite Justice Gundam!
The internal structure of the model possesses the ability to pose this finished kit in a ton of different ways. Both of the Fatum-01 wings are equipped with movable joints to allow them to warp up and recreate the classic silhouette during aerial battles. Tons of beam-effect parts are also included
Order today!
Introducing the original plastic model kit Akai Oniwaka Kiyomori designed and produced by manufacturer MJZ STUDIO! The appearance is inspired by the armor of a military commander, and it is equipped with weapons such as swords and spears.
There is also a rich lineup of bonuses, including two floating planes in the shape of demon masks, a display pedestal with sickle effect parts, and a demon fire effect.
Don't miss out on this masterpiece created by a master craftsman, get yours today!
Sharp, high-grade snap-together kit of the Gaia Gundam is molded all in colour, so no glue or paint are required!
The finished model will transform to Mobile Armour mode. Stickers are included for detail.
Order it now!
The very impressive Legend Gundam, from "Gundam Seed Destiny," is molded in colored plastic and all the parts snap together for easy assembly.
Polycaps are included for joints. A die-cut clear card featuring pilot Rey Za Burrel lists his specs; a stand to hold the card upright is included in the box.
Get yours now!
Fantastic high-grade injection-plastic kit of the Saviour Gundam in 1/144 scale!
Beautifully-molded all in colour; this coupled with snap-fit assembly means no paint or glue are required. Polycaps make the joints movable; and the completed model can transform into Mobile Armour mode. Foil stickers for detail are also included.
Get your Saviour today!
The Black Knight Squad Shi-ve.A from "Mobile Suit Gundam Seed Freedom" is now an HG model kit from Bandai!
It's equipped with the "Seed Action System" internal structure that specializes in reproducing impressive poses! You can reproduce the shield injection mode by parts replacement; a lead wire is included. The chest armor opens and closes, and the beam cloak is made of soft material with gradation printing.
Three beam sabers are included; they can be connected to equip both hands with a twin beam saber. Effect parts that can be attached to the toes are included. This kit is molded in color, too, so you'll get a great-looking result just by assembling it.
Order yours today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
