Model Kits and Accessories
BANDAI HG 1/144 GUNCANNON (CUCURU DOAN'S ISLAND VER.)
The Guncannon from "Mobile Suit Gundam: Cucuru Doan's Island" is now an amazing HG model kit from Bandai! The high posability of the HG format means this Gundam can get into impressive poses, such as lying on the ground to shoot, or crouching down! The kit is molded in the distinctive coloring of Cucuruz Doan's Guncannon, and two different types of newly molded backpack parts are included to reproduce both the Kai and Hayato versions. Original marking stickers designed by Hajime Katoki are included, too! Order yours today! [Includes]: Interchangeable hands Backpack parts (Kai) Backpack parts (Hayato) Beam rifle Marking stickers
$39.90$33.90
BANDAI HG 1/144 ZOWORT
From the latest in the Gundam series "Mobile Suit Gundam: The Witch from Mercury", Peil Technologies' mobile suit Zowort has been transformed in HG! Order it for your own collection today! Refitted parts aid with easy assembly and avoids pinching. The neck can be pulled out to expand the range of movement. Ball joint articulation in the waist supports forward and backward postures. Grip of the beam saber is stored in the forearm. Dedicated weapons with a characteristic form are included. Clear green beam parts are included for the beam saber. The state of boarding the flight system "HG 1/144 Ticbalan" (sold separately) has been reproduced. By combining with an action base (sold separately), you can create a wide variety of flying action poses. [Set Contents]: Beam saber x 2 Weapons x 2 Sticker x 1
$27.90$23.90
BANDAI HG 1/144 HEINDREE
The Heindree from "Mobile Suit Gundam: The Witch from Mercury" joins Bandai's "HG" model-kit lineup! It's designed for ease of assembly by using parts that are mainly post-fitted to avoid pinching; the ball joints on the neck and waist are designed with a space to accommodate forward- and backwards-tilted poses. In addition to its characteristic massive form, it's equipped with a special weapon that's as tall as it is, and can be rotated too. Its shield is mounted to its left arm; the arm can be moved so the shield is held in front. Its backpack is equipped for three nozzles for high mobility, too. Order yours now! [Includes]: Dedicated shield Dedicated weapon Stickers
$27.90$23.90
FLAMING SNOW RG-09 | 1/144 00 GUNDAM SEVEN SWORD/G INSPECTION FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-73 | 1/100 WING GUNDAM EW VER. KA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-98 | 1/100 GUNDAM DOUBLE X FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-105 | 1/100 GINN FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
FLAMING SNOW MG-69 | 1/100 CROSSBONE GUNDAM X-1 FULL CLOTH FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
PREMIUM BANDAI MG 1/100 GM CANNON (NORTH AMERICAN FRONT)
The Master Grade (MG) RGC-80 GM Cannon (North American Front) is a 1/100 scale kit released in 2015, as a Bandai Hobby Online Shop exclusive. Add it to your collection today!
$68.90$59.90
BANDAI MG 1/100 CHAR'S Z'GOK
The Master Grade version of Char's customised shiny red Z'Gok is here! The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series. The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. All in all, a superb kit of an incredibly cool machine!
$49.90$43.90
BANDAI MG 1/100 00 RAISER
One of the more popular suits in the Gundam universe, the 00 Raiser is now a Master Grade! This kit comes with its GN drives, which will be able to house an LED (one LED will be included with the kit, but another 4 will be needed to light up everything; 1 for the head, 2 for the GN Drives and 2 more for the Raiser). With the 00 Gundam and the 0 Raiser, it's like two kits in one box! All the weapons that make the 00 Raiser so intimidating, such as the GN Sword II and the GN Sword III are included, too! Stand not included.
$108.90$92.90
FLAMING SNOW HG-45 | 1/144 WING GUNDAM ZERO FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HGUC 1/144 RX-93 NU GUNDAM
Nu Gundam is finally offered in Bandai's HGUC line, and what a superb kit this turned out to be! Sharply detailed and molded in color, this snap-fit kit of Amuro Ray's last piloted Mobile Suit in "Char's Counterattack" features polycap-jointed articulation and is fully equipped with two types of beam sabers, a beam rifle, a new hyper bazooka, and of course, its distinctive fin funnels that are detachable from its back and can be set in firing mode. Stickers are provided to add detail to the completed model.
$41.90$36.90
BANDAI HG 1/144 TICKBALANG
From the latest in the Gundam series "Mobile Suit Gundam: The Witch from Mercury", Tickbalang, which can carry MS such as Zowort, has been transformed in HG! The footrest can be stored and deployed by sliding it. Combined with an action base (sold separately), it can be displayed while towing the MS. Can be combined with other "The Witch from Mercury" plastic model series including "HG 1/144 Zowort".
$22.90$19.90
PR-PRODUCTION 1/10 PROJECT KARI SAZANAMI
PR Production debuts their new mecha girl plastic model-kit series "Project Kari" with Sazanami! She comes with two different bodies: one in armed mode, and one wearing an elegant ceremonial dress! Her exclusive weapons can be transformed into bows, rifles, twin swords, and scythes by disassembling and combining them. She's super-posable after assembly, too. Order her for your own collection today!
$81.90$69.90
