Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai brings us the Vaskyrot of the Earth Allied Forces -- the newest member of their "30MM" (30Minutes Missions) model-kit lineup!
The Vaskyrot is equipped with the most 3mm joints in the history of the 30MM lineup, for more expandability than ever before! Its backpack with a built-in C-type joint can be expanded too. A rifle and shield are included; the shield is equipped with multiple 3mm joints on both sides. Although the Vaskyrot has massive proportions, it's flexible enough that it can kneel on one knee; a newly designed RoiRoi drone unit is included too.
Order yours today!
[Includes]:
Rifle
Shield
Hand parts (x1 set)
RoiRoi
The top vote-getter in the 30MM Color Variation Grand Prix is the Revernova in brown -- and now it's a model kit just for you!
Its sturdy legs support this heavily armored mecha easily; movable front armor is used on the waist, and it's equipped with a mechanism for combining it with other machines, such as the Gardonova. It can also be customized with existing optional parts. It's armed with a high-powered rifle, too. Order yours today!
Order yours today!
[Includes]:
High-powered rifle
This 30MM (30 Minutes Missions) kit from Bandai builds into the space-type version of the Portanova!
Molded in pale gray, it features increased expandability thanks to new waist parts; it can be built into a four-legged machine by combining it with another kit. It's equipped with a large arm-unit rifle and claw, too.
Order it today!
[Mold Color]: Gray, light gray
[Includes]: Space backpack/armor set, arm unit rifle/large claw set, marking stickers
Bandai brings us a new lineup of endlessly customizable, easy-to-build mecha model kits with 30 Minutes Missions (30MM)!
Representing mass-produced robots, these kits are perfect for army-building and feature a common joint system so parts can easily be switched between the different types of units. Each kit builds into a highly posable figure with armor; in addition, the armor parts are equipped with hard points to attach weapons.
The bEMX-15 Portanova is presented here in dark gray, with parts included for a weapon.
Order yours today!
A large propellant tank unit that can be attached to each aircraft is now available as part of the 30MM Optional Parts Set!
Includes a large propellant tank, large booster, joint parts and many other useful parts for customization.
Can be combined with other 30MM series items for a variety of customization options.
You can enjoy various arrangements such as the backpack of existing aircraft or the expansion tank of 30MM 1/144 Optional Parts Set 9 (Large Booster Unit) (sold separately).
[Accessories]:
Base block x 1
Head block x 1
Large booster x 2
Large propellant tank x 2
Joint parts x 1
The new Earth Alliance fighting mech known as eEXM-S02M Forestieri 02 now joins the "30MM" (30Minutes Missions) model-kit lineup from Bandai!
It's easy to assemble with its "block" assembly system, making it easy to find and identify the parts needed next in order to assemble the kit. The new weapon known as the Roy Roy is included along with its rifle and beam sword; the hilt of the beam sword and the rifle can be attached to the backpack, and the beam sword's hilt can also be attached to the thigh. Common 3mm joints make it easy to customize by mixing and matching parts with other 30MM series items, too.
Order yours today!
[Includes]:
Rifle
Beam sword
Roy Roy
Hand parts (x1 set)
The "Reaper Specification" of "Spinatia" from the 3rd Force Maxion Army joins the "30MS" (30Minutes Sisters) figure-kit lineup from Bandai!
This features Spinatia herself, her armor and weaponry. Assembly is easy, and she'll be incredibly posable when you're done; her weapons can be used in Axe mode and Lance mode. Rearrange her weapons and armor to get the bat-like support mechanism! The support mechanism can be displayed separately on an action base (not included, sold separately) if you like.
Order this formidable warrior for your own collection today!
[Includes]:
Axe
Hand parts (x1 set)
Armor
Joint parts
The long-awaited heavy-duty mass-produced machine from the Byron Army in "30MM" (Thirty Minutes Missions) makes its debut -- it's the first mecha in the series to combine!
Its legs have the largest volume in 30MM history, and it's also the first 30MM item to feature movable front armor on its waist. Combine it with the Gard Nova (sold separately) to make it even more impressive! Like many 30MM items, it can also be customized to your heart's content.
Order yours today!
[Includes]:
Rifle
Bandai expands its new lineup of endlessly customizable, easy-to-build mecha model kits, 30 Minutes Missions (30MM)!
Representing mass-produced robots, these kits are perfect for army-building and feature a common joint system so parts can easily be switched between the different types of units. Each kit builds into a highly posable figure with armor; in addition, the armor parts are equipped with hard points to attach weapons.
The eEXM-15 Portanova is presented here in navy blue, with parts included for a weapon.
Get yours today!
Bandai brings us their 30MM eEXM-17 Alto (Ground Warfare Ver.) in Brown!
Molded in tan plastic, you can build it as a bipedal robot or a tank; it features new equipment like a backpack with a cover, and a reconfigurable bazooka is also included. The additional parts can also be installed in the Portanova.
Get yours today!
[Includes]: Backpack for land battle/armor (1 set), bazooka, stickers for markings
The Heindree Sturm, a combat mobile suit made by Grassley Defense Systems in "Mobile Suit Gundam: The Witch from Mercury," is now a 1/144-scale HG model kit from Bandai!
Ball joints at its neck and waist allow natural forward-and-backward tilting poses; it's equipped with a movable special weapon on its back. It also has a special shield on its left arm, which is equipped with a structure enabling it to be turned to the front.
Order yours today!
[Includes]:
Beam rifle
Beam saber
Shield
Stickers
Bandai brings us a new lineup of endlessly customizable, easy-to-build mecha model kits with 30 Minutes Missions (30MM)!
Representing mass-produced robots, these kits are perfect for army-building and feature a common joint system so parts can easily be switched between the different types of units. Each kit builds into a highly posable figure with armor; in addition, the armor parts are equipped with hard points to attach weapons.
This set of leg boosters -- one left and one right -- can be used with either the Alto or Portanova units.
Order yours now!
Bandai brings us their 30MM eEXM-17 Alto (Aerial Warfare Ver.) in navy blue!
Bandai's 30MM eEXM-15 Alto in navy blue is here! Bandai expands its new lineup of endlessly customizable, easy-to-build mecha model kits, 30 Minutes Missions (30MM)!
Representing mass-produced robots, these kits are perfect for army-building and feature a common joint system so parts can easily be switched between the different types of units. Each kit builds into a highly posable figure with armor; in addition, the armor parts are equipped with hard points to attach weapons.
Order yours today!
The Sword Impulse Gundam, from Gundam SEED Destiny, is molded in colour and features snap-fit assembly, as well as polycaps at the joints for flexibility. It can break down into the Sword Silhouette, Leg Flyer, Core Splendour, and Chest Flyer.
A clear plastic plate featuring Shinn Asuka and his statsis included as a neat bonus, too.
Get yours now!
The Mobile Suit Ensemble collection are highly detailed and stylized 2.5” figures that are a great entry point for new builders and core fans alike!
This collection depicts the most popular figures from the Gundam franchise. Each blind box includes 1 of 5 styles ranging from Weapons/Accessory Kits, Support Units, and Mobile Suits that have interchangeable parts that are compatible with each other!
Complete set of 5 types:
Gundam Calibarn
Immortal Justice
Immortal Justice Expansion Set
Gyan
MS Weapon Set
Spinatia (Fencer Type) is the first female body in Bandai's 30MM (30 Minutes Missions) lineup, and she looks amazing!
This all-in-one kit includes parts to build Spinatia herself and her awesome armor. The new structure is easier to assemble than before, with full posability after assembly. She's equipped with 3mm joints, standard to the 30MM and 30MS (30 Minutes Sisters) lineups, so she can use accessories from those lineups as well.
Order her today!
[Includes]:
Fine sword (x2)
Interchangeable hands: weapon-holding hand (left and right), flat hand (left and right), facial expression weapon holder (right)
Fencer armor (x1 set)
Joint parts (x1 set)
The Forestieri 03 now joins the "30Minutes Missions" (30MM) lineup from Bandai in blue -- the most popular choice in the "30MM Color Variation Grand Prix"!
The concept of the "30MM" series is a "block assembly system" that means assembly is easy; it comes with chest armor and front skirt parts, and it uses 3mm-diameter joints -- a common joint structure throughout the series -- to enable endless customization. In addition to its weapons, various hand parts and its spider-like companion mech Roy Roy is included. Order yours today!
[Includes]:
Beam rifle
Plasma beam sword
Roy Roy
Hand parts (x1 set)
Armor (x1 set)
Shointo parts (x1 set)
The new Earth Alliance fighting mech known as eEXM-S01U Forestieri 01 now joins the "30MM" (30Minutes Missions) model-kit lineup from Bandai!
It's easy to assemble with its "block" assembly system, making it easy to find and identify the parts needed next in order to assemble the kit. The new weapon known as the Roy Roy is included along with its rifle and beam sword; the hilt of the beam sword and the rifle can be attached to the backpack, and the beam sword's hilt can also be attached to the thigh. Common 3mm joints make it easy to customize by mixing and matching parts with other 30MM series items, too. Order yours today!
[Includes]:
Rifle
Beam sword
Roy Roy
Hand parts (x1 set)
In addition to being the largest "30Minutes Missions" (30MM) item in the lineup so far, Provedel features "ride-on customization" that allows you to attach existing items!
The head parts are newly shaped; the figure is equipped with a transformation gimmick that allows you to switch between the EXMAX riding form and REX form. In the EXMAX riding mode, you can connect the included backpack and varnish tube to existing items. The included heavy beam magnum can be disassembled and connected to the boarding section. The holding power of the arm and leg joints is now improved by a sandwich structure; you can also create a 3mm axis by attaching the polycap that comes with separately sold items. A runner with a set of multi-joints essential for customization, such as 3mm joints, C-type joints, and detail cover parts, is included too. Order yours today!
[Size]: Approximately 20cm tall when completed
[Includes]:
Heavy beam magnum
Hand parts: open hands (left and right), grip hands (left and right)
Backpack for boarding
Ride relay parts
Varnish tube (x2)
Lead wire (x2)
Multi-joints (x1 set)
Stickers
The "30MM" (30Minutes Missions) Army has a new variable-type unit -- the Volpa Nova can transform into a quad bike!
It's equipped with a locking mechanism so the silhouette after transformation is stable. Intermediate forms between human and vehicle types can be customized; a bazooka is included. You can also customize it to your liking with existing "30MM" parts and accessories! Order yours today!
[Includes]:
Bazooka
![30MM 1/144 BEXM-15 PORTANOVA (SPACE VER.) [GRAY]](//jfc.sg/cdn/shop/files/30MMPORTANOVASPACEGRAY-0.jpg?v=1718438462&width=645)
![30MM 1/144 BEXM-15 PORTANOVA (SPACE VER.) [GRAY]](//jfc.sg/cdn/shop/files/30MMPORTANOVASPACEGRAY-2.jpg?v=1718438480&width=645)
![30MM 1/144 EEXM-17 ALTO (FLIGHT TYPE) [NAVY]](//jfc.sg/cdn/shop/files/30MMALTOFLIGHTNAVY-0.jpg?v=1714206033&width=645)
![30MM 1/144 EEXM-17 ALTO (FLIGHT TYPE) [NAVY]](//jfc.sg/cdn/shop/files/30MMALTOFLIGHTNAVY-3.jpg?v=1714206033&width=645)
![30MM 1/144 BEXM-15 PORTANOVA (SPACE VER.) [GRAY]](http://jfc.sg/cdn/shop/files/30MMPORTANOVASPACEGRAY-0.jpg?v=1718438462&width=645)
![30MM 1/144 BEXM-15 PORTANOVA (SPACE VER.) [GRAY]](http://jfc.sg/cdn/shop/files/30MMPORTANOVASPACEGRAY-2.jpg?v=1718438480&width=645)
![30MM 1/144 EEXM-17 ALTO (FLIGHT TYPE) [NAVY]](http://jfc.sg/cdn/shop/files/30MMALTOFLIGHTNAVY-0.jpg?v=1714206033&width=645)
![30MM 1/144 EEXM-17 ALTO (FLIGHT TYPE) [NAVY]](http://jfc.sg/cdn/shop/files/30MMALTOFLIGHTNAVY-3.jpg?v=1714206033&width=645)
