Here comes Hurricane Assault Revenger by Nuke Matrix! This is a highly detailed model kit from the Cyber Forest Fantasy Girls series, made with high quality materials.
Wait no more, get this superb kit for yourself now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
G FRAME FA is a series of high-spec action figures released from Bandai’s Candy Division.
This sixth round features the Rising Freedom and Immortal Justice from Mobile Suit Gundam SEED FREEDOM and the Gyan and Char’s Gelgoog from Mobile Suit Gundam.Char’s Gelgoog included in this round is a renewed version of the one included in G FRAME 04.
[This set includes only:]
1. Immortal Justice Gundam Armor Set2. Immortal Justice Gundam Frame Set
G FRAME FA is a series of high-spec action figures released from Bandai’s Candy Division.
This sixth round features the Rising Freedom and Immortal Justice from Mobile Suit Gundam SEED FREEDOM and the Gyan and Char’s Gelgoog from Mobile Suit Gundam.Char’s Gelgoog included in this round is a renewed version of the one included in G FRAME 04.
[This set includes only:]
1. Rising Freedom Gundam Armor Set2. Rising Freedom Gundam Frame Set
Shen Long has joined the MG lineup!
Shen Long comes with its most cool Dragon Fang attachment and also his shield and Beam Trident which can attach to its backpack when he's on the move. Shen Long also comes with foil stickers, dry transfers and marking stickers.
Stand not included.
Assemble your own display stand for your Gundams and other mecha model kits!
This new base from Bandai features three bases, each 2.8cm by 2cm, that can all interlock to form one base, each with lots of openings for support poles.
A long support pole 11cm in length is included, as are joint parts and other support parts. Perfect for larger kits like Master Grades and RE/100! This version is clear.
Order today and put your Gundams on display!
This Master Grade model kit of the Sinanju Stein, as seen in "Mobile Suit Gundam Narrative," features an updated design!
The engraving on the Sleeves emblem is divided into parts for ease of assembly; the beam axe can be connected and equipped as a long-beam naginata, and the beam parts can also be deployed while attached to the shield. Emotion Manipulator SP is used for the hand parts, and each finger can move independently!
The flexible leg thrusters can be moved independently with their lift arms; the cockpit can open and close, and the vertical movement of the chest block can also be reproduced. Two figures of Zoltan Akkanen are included: sitting and standing.
Order this incredible Gundam for your own collection today!
[Includes]:
Shield
High beam rifle
Grenade launcher
Beam axe (x2)
Bazooka
Beam saber (x2)
Effect parts (x1 set)
Interchangeable hands (x1 set)
Figures (x2)
Joint parts (x1 set)
Stickers
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
This is a black version of the Finishing Surfacer.
This black base allows the omission of the painting of a black coat before applying a metallic color and reduces the thickness of painting.
This surfacer can be applied to give a final finish to the surface more smoothly.
It has the characteristic of being fine grained and it is not prone to clogging up detail in the mold.
Most suitable not only for making a base before painting but also for surface finishing of an original mold before casting.
This surfacer can be applied to give a final finish to the surface more smoothly.
It has the characteristic of being fine grained and it is not prone to clogging up detail in the mold. Most suitable not only for making a base before painting but also for surface finishing of an original mold before casting.
Mr. FINISHING SURFACER provides a smooth finish on the surface of parts and does not easily fill in molded areas.
This is a black version of the Finishing Surfacer. This black base allows the omission of the painting of a black coat before applying a metallic color and reduces the thickness of painting.
Bandai brings us a new lineup of endlessly customizable, easy-to-build mecha model kits with 30 Minutes Missions (30MM)!
Representing mass-produced robots, these kits are perfect for army-building and feature a common joint system so parts can easily be switched between the different types of units. Each kit builds into a highly posable figure with armor; in addition, the armor parts are equipped with hard points to attach weapons.
The bEMX-15 Portanova is presented here in green, with parts included for a weapon. Order yours today!
The Gundam Caliburn from "Mobile Suit Gundam: The Witch From Mercury" is now a "SD Gundam Cross Silhouette" model kit from Bandai! Parts to duplicate the rainbow-colored shine that covers the whole body shell when the Permet Score exceeds 8 are included; the non-emitting shell unit is reproduced with smoked black parts, and the red shell unit representing Permit Score 5 is also reproduced with stickers!
You can use the SD frame or the CS frame into the upper body to select your favorite head and body shape. Interchangeable hands including hands for holding weapons, and flat hands.
The bit-on form that attaches the bit stave to the body is also reproduced, and the quadra thruster at the rear of the variable rod rifle can be opened and closed. The legs have movable parts that can be transformed into high maneuver mode, too!
Order it for your own collection today!
[Includes]:
Variable rod rifle
Escutcheon
Beam saber (grip) (x2)
Hand parts (x1 set)
Stickers
Here comes the HG Gundam Ground Type as seen in "Mobile Suit Gundam: The 08th MS Team"!
Its exterior armor parts have been newly molded to recreate the unique look of the Ground Type, including the asymmetrical chest piece. It also features increased mobility, allowing you to recreate it posing on one knee while holding its gun with both hands, and other impressive poses seen in the anime series! The 180mm canon is newly molded, and can be stored inside the wepaon container by replacing certain parts.
Order today!
[Includes]:
180mm canon (x1)
Beam rifle (x1)
100mm machine gun (x1)
Beam saber (x2)
Weapon container rack (x1)
Shield (x1)
Foil sticker sheet
Marking sticker sheet
This model kit from Bandai introduces an Exa Vehicle (small mass production version) to the "30MM" (30Minutes Missions" lineup, with the first cockpit parts in the series!
This kit includes a C-type runner, which is the same as that found in the Spinatio, to expand the range of customization.
Your 30MM figures will thank you -- order yours now!
To observe the 40th anniversary of Gunpla, the Zeong from "Mobile Suit Gundam" has been converted to a Real Grade kit using the latest technology and design!
It features advanced MS joints for smooth and powerful poses; the mono eye can be moved left and right, and up and down as well. The built-in frame features a wider range of movement at the waist than before to allow for more dynamic poses; four verniers on the chest and back are deployed in conjunction with the front-and-back movement of the chest portion.
The interchangeable hand parts are insert-molded for precise details and full flexibility, too! The arm-mounted mega-particle cannon is also included, in separate parts (including the wires).
Get this spectacular new Zeong for your own lineup today!
[Includes]:
Lead wire (red)
Lead wire (black) (x2)
Realistic decals
Display base
Semi-Rigid Sanding Sticks - Less Effort, More Efficiency
Superb craftsmanship, high strength membrane sanding stick with extra efficiency and service life, with seven grits available to suit your different demands!
Great versatility, suitable for lengthy straight, curved and cylindrical surfaces.
Specifications: 180*20*4 MM
Get one and enhance your model kit building experience today!
Semi-Rigid Sanding Sticks - Less Effort, More Efficiency
Superb craftsmanship, high strength membrane sanding stick with extra efficiency and service life, with seven grits available to suit your different demands!
Great versatility, suitable for lengthy straight, curved and cylindrical surfaces.
Specifications: 180*20*4 MM
Get one and enhance your model kit building experience today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](//jfc.sg/cdn/shop/files/hguc-g-ground-type-0.jpg?v=1724749873&width=645)
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](//jfc.sg/cdn/shop/files/hguc-g-ground-type-1.jpg?v=1724749873&width=645)
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](http://jfc.sg/cdn/shop/files/hguc-g-ground-type-0.jpg?v=1724749873&width=645)
![HGUC 1/144 RX-79 [G] GUNDAM GROUND TYPE](http://jfc.sg/cdn/shop/files/hguc-g-ground-type-1.jpg?v=1724749873&width=645)
