Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
As part of their "30MM Option Parts" lineup, Bandai brings us this set of a large cannon and an arm unit! These option parts are ready to make your "30Minutes Missions" or "30Minutes Sisters" figure kits even more powerful and formidable!
Customized head parts are also included. The large cannon and arm unit can be combined with the "30MM 1/144 Option Parts Set 9 (Large Booster Unit)" and "30MM 1/144 Option Parts Set 10 (Large Propellant Tank Unit)" to create a fully armored form! The head parts can be combined with items such as the "30MM 1/144 Option Parts Set 7 (Customized Head B)." All are sold separately.
Order yours today!
[Includes]:
Large cannon
Arm unit (left and right)
Large hand parts: flat hand (left and right), grip hand (left and right)
Customized head parts (mask x1, base parts x2)
Introducing the Exa Vehicles series, a part of Bandai's 30MM (30 Minutes Missions) lineup!
Exa Vehicles can be used in combination with other 30MM kits to further customize your builds, or simply built and displayed on their own as vehicles. This entry in the lineup builds the Air Fighter in white, a vehicle shaped much like a fighter aircraft. Or, use it as a flight backpack for your 30MM mechs!
[Mold Color]: White
[Includes]: Vehicle x1, face parts x1, foil sticker sheet x1
You absolutely do not want to get the Full Armor Unicorn Gundam in Destroy Mode angry at you!
It comes with enough armaments to outfit a small army: two hyper bazookas, the Beam Magnum, four Beam Sabers, two Beam Saber blades, two anti-ship missles, two grenade launchers, four six-part hand grenades, six Beam Gatling Guns, its shield in stored state and three expanded sheilds, two large boosters, a rifle handle, and two gripping hands. Whew!
It's posable after assembly, and comes with foil stickers for markings; instructions are illustrated.
Don't miss out on this ferocious beast!
The Acerby (Type-A) from the "30Minutes Missions" (30MM) series from Bandai is now available!
This kit includes the main body, armor parts, and weapons too. The armor can be attached to the shoulders and waist; the submachine gun has a beam sword that can be separated. The visor on the head can be adjusted up and down by replacing it, and chest parts are included that allow you to customize the armor that comes Spinatia (sold separately).
Order yours today!
[Includes]:
Submachine gun
Beam sword
Hand parts (x1 set)
Armor
Joint parts
The eEXM-21 Raviot from Bandai's "30Minutes Missions" (30MM) lineup now comes in a deep navy blue color!
Its shotgun and backpack are included, as are marking stickers. Customize and coordinate with your other 30MM kits, and build your own elite fighting force.
Order yours today!
[Includes]: Shotgun, backpack, marking stickers
This Gundam MS Cage/Dock designed by VT is a replica of the integrated facility "Gundam Base", and can hold Gundam model kits of the 1/144 scale models.
Comes with a set of 16 engineers/workers to give the MS cage additional detailing!
Easy to assemble and great for displaying your model kits, replicating the Gundams' docked scenes from their anime!
Don't miss this, get one for yourself now!
The Dilanza piloted by Guell Jetterk in "Mobile Suit Gundam: The Witch of Mercury" gets a new HG model kit from Bandai!
Its movable axis means it can get into tons of bold action poses after assembly; the neck block that connects the head and torso is equipped with a double ball joint for superior flexibility. The shoulder shield is also highly posable, and various parts of the fuselage have built-in gimmicks for profound action.
The Dilanza's characteristic antenna and feather decoration has also been reproduced; the backpack can be attached and removed as you like. Rifles and torches can be stored behind the shield, and the beam partisan, beam torch and beam rifle are included.
Order yours now!
[Includes]:
Beam partisan
Beam torch
Beam rifle
Stickers
From "Mobile Suit Gundam Wing" comes High Grade After Colony Wing Gundam! This is a highly detailed and articulated model kit molded in multiple colors.
Order this Gundam for your own collection today!
The Gundam Amazing Barbatos Lupus, as seen in the "Gundam Build" 10th anniversary video "Gundam Build Metaverse," gets a new 1/144-scale HG (High Grade) model kit from Bandai!
The main body and booster can be separated or combined; the booster and mace can also be combined into a weapon. The mace can be mounted on the back; the claw, which can be separated from the booster and attached to the arm, is equipped with an unfolding and rotating gimmick.
A lead wire is used for the tail blade, and the grip of the mace can be expanded to reproduce its shooting mode. The gun barrel can be attached, detached, and rotated in 90-degree increments. A base for display is included.
Order this "amazing" version of the Barbatos Lupus for your own collection today!
[Includes]:
Mace
Lead wire
Display base
Stickers
Bandai's "Mobility Joint Gundam" lineup is a series of plastic action model kits with various interchangeable parts and stickers!
Strike Gundam and Strike Rouge from "Mobile Suit Gundam Seed," Gundam Caliburn from "Mobile Suit Gundam: The Witch from Mercury," and G-3 Gundam from "Mobile Suit Gundan MSV" are partly new models! Strike Gundam can be enhanced and expanded to Perfect Strike Gundam by adding the EX parts, too! There are eight different items to collect and trade, randomly packed in boxes of ten; each comes with a piece of soda-flavored gum.
Order yours today!
[Figure Size]: Approximately 7cm x 5cm
[Materials]: ABS
[Lineup]:
Strike Gundam
Strike Rouge
Gundam Caliburn
G-3 Gundam
EX parts for Strike Gundam
EX parts for Strike Rouge
EX parts for Gundam Caliburn
EX parts for G-3 Gundam
NOTE: This listing is for Gundam Calibarn only
In this 24th edition of "FW Gundam Converge," Bandai brings us two Mobile Suits from "Mobile Suit Gundam Seed Freedom," as well as the Gundam Caliburn from "Mobile Suit Gundam: The Witch From Mercury"! The Re-Gazi from "Mobile Suit Gundam: Char's Counterattack," the Re-Gazi (Unicorn version) from "Mobile Suit Gundam UC," and the Zaku Tank from "Mobile Suit Gundam MSV" are also part of the lineup! There are six different highly detailed super-deformed figures to collect and trade; each one comes with a base and a piece of soda-flavored gum, and they're randomly packed in boxes of ten. Order yours today!
[Size]: Approximately 5.5cm x 4.5cm
[Materials]: PVC, MABS, ABS
The first "variable mass production machine" in the 30MM series is the new aircraft of the United Earth Forces - the eEXM-30 Espossito Beta! This 30MM can transform into flight mode and each part of the body can also be customized however the user likes. By combining with other Espossito and Exa-vehicles (sold separately), you can make it an even more unique machine. Order today!
[Accessories]:
Beam rifle x2
Shield x2
The first "variable mass production machine" in the 30MM series is the new aircraft of the United Earth Forces - the eEXM-30 Espossito Beta! This 30MM can transform into flight mode and each part of the body can also be customized however the user likes. By combining with other Espossito and Exa-vehicles (sold separately), you can make it an even more unique machine. Order today!
[Accessories]:
Beam rifle x2
Shield x2
Bandai brings us a new lineup of endlessly customizable, easy-to-build mecha model kits with 30 Minutes Missions (30MM)!
Representing mass-produced robots, these kits are perfect for army-building and feature a common joint system so parts can easily be switched between the different types of units. Each kit builds into a highly posable figure with armor; in addition, the armor parts are equipped with hard points to attach weapons.
The eEMX-17 Alto is presented here in dark gray, with parts included for a submachine gun-type weapon, a backpack, and a knuckle-type weapon.
Order yours today!
The newest addition to Bandai's "Pokemon" Plamo Collection is No.46, the legendary Sky High Pokemon, Rayquaza!
You can now build this magnificent beast with your own hands! Each node of this dragon's body can be rotated, which allows unique and dramatic poses during display. Rayquaza's jaw and front arms are also moveable. The length of Rayquaza once assembled can exceed more than 20cm, too - the longest of the Pokemon Plamo to date! A pedestal is included for display, as well, and takes on the shape of clouds to really make it look like it's flying in the sky!
Order today!
From the 2nd season of "Gundam Build Divers Re:RISE" comes a new kit of the enemy mobile suit set to appear on the show!
This unit features Bandai's recently introduced "Core Docking Custom" system, meaning more customization options than ever. You can swap armor parts between this mobile suit and the Core Gundam (sold separately) to create your own unique build.
Order today!
The elegant Gardevoir joins Bandai's "Pokemon" Plastic Model Collection, placing her in the 'Select Series' of plamo.
The kit is easy to assemble while still retaining the detailed and signature silhouette that Gardevoir boasts. The head is movable up, down, left and right with ball joints and the arm parts and hand parts can be reassembled for multiple poses.
Order this kit for your collection today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
![30MM 1/144 EXA VEHICLE (AIR FIGHTER VER.) [WHITE]](//jfc.sg/cdn/shop/files/30MMEXAVAIRFWHITE-0.jpg?v=1717764563&width=645)
![30MM 1/144 EXA VEHICLE (AIR FIGHTER VER.) [WHITE]](//jfc.sg/cdn/shop/files/30MMEXAVAIRFWHITE-1.jpg?v=1717764563&width=645)
![30MM 1/144 EXA VEHICLE (AIR FIGHTER VER.) [WHITE]](http://jfc.sg/cdn/shop/files/30MMEXAVAIRFWHITE-0.jpg?v=1717764563&width=645)
![30MM 1/144 EXA VEHICLE (AIR FIGHTER VER.) [WHITE]](http://jfc.sg/cdn/shop/files/30MMEXAVAIRFWHITE-1.jpg?v=1717764563&width=645)
