The High Grade Build Fighter Build Burning Gundam is here to shake things up!
This kit features the option to switch Build Burning Gundam into normal mode or fight mode style, depending on which color of included translucent plastic parts (blue or orange) you choose to equip!
Four types of hands are included for striking various attack poses, and the assortment of burning battle effect parts add that perfect finishing touch for action scenes.
Build to fight!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Athrun Zala from "Gundam Seed Freedom" makes this acrylic pen stand from Plex something you'll want to have in your collection, or on your desk!
Order yours today!
[Size]: Approximately 10cm high
[Materials]: Acrylic
This 1/144-scale Real Grade kit of Char's custom version of the fast and agile Z'gok features full posability thanks to its internal "skeleton."
Parts come molded in color, so no paint is required to complete this easy to build kit, but it can be used to add detail! Includes stickers for markings.
This crisp new Gundam Astray (blue frame) comes to us in a High Grade model, superbly molded in color and of course featuring snap-fit assembly for ease in building.
Nicely engineered, it's extremely poseable thanks to matching blue polycaps (instead of the standard grey!), and can even drop to one knee to use the included shoulder-mount bazooka!
Foil stickers for shiny bits and clear stickers for other markings are included as well, for added detail.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Celebrating the 40th anniversary of Gunpla, Bandai brings us a new lineup--the Gunpla Evolution Project! The first entry in this new series is the Zeta Gundam!
It features increased flexiblity for superior posability, and accurate proportions. Parts can be switched to transform it into the Wave Rider, too. In addition, it's armed with the Hyper Mega Launcher, a beam saber, and more.
Order yours today!
The Xi Gundam from "Mobile Suit Gundam: Hathaway's Flash" gets a new HGUC kit from Bandai! This over-26-meter-tall Mobile Suit is perfectly rendered in 1/144 scale, bringing a sense of density and volume while still reflecting even the finest details.
Extra hands are included, as are the beam saber, beam rifle, and shield. The shield can be attached by removing the hexagonal parts of the arm. The wing on the back, the blades on the sides of its legs, and the deployable Minovsky flight unit are all included as well. Transform it from MS form to flight form by moving the legs and larger parts!
Order yours today!
This new HG model kit of the Dilanza from "Mobile Suit Gundam: The Witch of Mercury" can be assembled as a general version, or as the special unit used by Character A with parts selection!
Shoulder parts and antenna for the general version are included, as are shoulder parts and antenna for Character A's ride; the huge axe weapon is included too. The range of movement is expanded by opening and closing the rear armor. The torch includes clear effect parts for a realistic look, and both the effect parts and the torch itself are removable. The torch can be stored behind the shoulder shield on both versions, too.
Order yours now!
Bandai's new Real Grade kit of the Wing Gundam from "Endless Waltz" is here!
Can be displayed in robot or fligh form. Molded in black, white, red, yellow, blue and clear green, it has decals and stickers for markings, plus detailed, heavily illustrated instructions.
Here comes CH-01 Blue Flame 蓝焰 by ZZA Model!
A very detailed model kit made with high quality materials, included in this kit is a diecast inner frame. The articulation with this kit is superb, enabling a wide range of poses!
Wait no more, get this amazing kit for yourself now!
Set includes:
Main body
Diecast inner frame
Backpack with Wings
Dual blades
Dual beam rifles
Display stand
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them!
Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
This universal case designed by Dspiae can be used to store most nippers design. It is durable, ergonomic and affordable!
Get one to store your nippers now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Mr. FINISHING SURFACER provides a smooth finish on the surface of parts and does not easily fill in molded areas.
The white FINISHING SURFACER released this time is most suitable for final finishing before painting a character model or car model or for final finishing of the base form of figure painting that calls for bright colors.
Quantity: 2 pieces/grit/packSize: 35 x 20 x 10mmGrit: #2000 #4000 #6000 #8000 #10000
Best five grits of sanding sponge for polishing
Outstanding durability and performance with high efficiency
Semi-Rigid Sanding Sticks - Less Effort, More Efficiency
Superb craftsmanship, high strength membrane sanding stick with extra efficiency and service life, with seven grits available to suit your different demands!
Great versatility, suitable for lengthy straight, curved and cylindrical surfaces.
Specifications: 180*20*4 MM
Get one and enhance your model kit building experience today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
