From "Gundam Build Fighters Try," it's the mighty Kamiki Burning Gundam!
It's molded in vivid red, white, black, dark blue, clear blue, yellow and clear orange plastic, so painting is not necessary (although painting will improve the appearance of just about any kit). Comes with flame effect parts, and three extra sets of hands; foil stickers are provided for the details.
Get yours now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The official BANDAI SPIRITS nippers, a must-have for plastic modelers, are finally here!
With these, anyone can make their plastic modeling debut today!
The basic specifications are recommended for beginner plastic modelers, and there are multiple grip colors to choose from!
*Please note that some of the photos and illustrations of the products may differ from the actual products.
Please note that product names, specifications, release dates, prices, and other information on this web page are subject to change.
The package, logo, and product specifications are subject to change without notice.
Quantity: 20 pieces/packSize: 90 x 20mm
Save time trimming and replacing sand paper; MADWORKS Adhesive Sanding Papers are the perfect choice for large sanding jobs.
Comes with the most commonly used grits, these low-tack sanding papers minimize the chance any residue are left on the Acrylic Grinding Plate. We package them like a pack of gum so it is easy to organize: no more messy work space or trimming of sand papers.
Perfect size for MADWORKS Acrylic Grinding Plates
The extra bit of sand paper can be folded such that the grinding plate can reach into corners and tight area.
Outstanding durability and performance with high efficiency
DSPIAE Markers are high-quality, professional-grade art markers designed for use in a wide range of modelling and creative applications. These markers are known for their exceptional color quality, durability, and precision, making them a favorite among artists, designers, and hobbyists alike.
Get yours now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai Brings us a new line of Super Deformed (SD) Gundam called the EX Standard!
These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them! Foil marking stickers are also included to add extra colors and markings to your kit.
A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
From "Mobile Suit Gundam SEED" comes a Figure-rise Standard kit of the popular vocalist, Lacus Clyne!
She comes with three different expressions: a normal face, a smiling face and a troubled face. The normal face is recreated using tampo printing, so no stickers are required! She even comes with optional parts to recreate her miniskirt version outfit. Hand parts and the Halo known she calls Mr. Pink (aka "Pink-chan") are also included.
Be sure to add her to your collection!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai's SD Gundam EX Standard lineup features stylish proportions and newly designed joints for improved posability, as well as parts and weaponry that can be swapped with HG kits! Each comes with foil stickers for the markings.
With the ever-popular RX-78-2, Bandai launches its newest brand: RG. RG stands for "Real Grade," and with this line Bandai loads an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features.
The new frame is "stress free" and features Advanced MS Joints, and stands 12.5 centimeters tall when assembled. Those wishing to tackle this awesome example of Bandai engineering will need a good hobby knife, as many of the small pieces need to be trimmed perfectly in order for them to assemble correctly.
Real Sticker Decals are included. And they're fantastic! Stand not included.
Celebrating the 10th anniversary of Gundam Seed (and the re-release of the anime on Blu-ray) Bandai has released their 'remastered' versions of their great HG kits from years gone by.
Raider Gundam is identical to the initial release but now comes in colors matching the Blu-ray anime, marking stickers, and an extra part that lets you attach Raider Gundam to an action base 2 (sold separately).
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
From Orange Cat Industry, comes the Cassowary Exceed Type Unit 02!
This set of parts uses multiple molding colors, and the assembly method is designed to minimize seams and gaps between parts.
Pre-painted effects parts, such as the head, enhance the refined appearance of the model, achieving an effect closer to the illustration without the need for additional painting.
Special water slide decals are included to add richer details to the finished model. The set includes a variety of new weapons, such as shotguns, Gatling guns, heavy shields, and combat knives. The shield and the Gatling gun body can be rotated 360°,and the shield can also be removed separately to function as a Gatling bracket.
Get this kit for yourself now!
From HobbyMecha and MoShow Toys comes a new entry in their Progenitor Effect line of diecast figures!
Standing appx 8.6" tall, this amazing mecha action figure comes with a huge range of weapons and accessories for you to customize with! It is highly articulated and is very posable - get this figure for yourself now!
Contents:
Main body
Spear
Sword
Backpack with 4 pairs of wings
6 pairs of hands
Display stand
A convenient package of 17 model kit tools specially curated by us! This set is suitable for both beginner and advanced modelers.
Package includes: 17 model kit tools/set
Each set contains:1) 4 step Buffing/Polishing Block (4 different grits) x 12) Dual Side Sanding Stick (2 different grits - 600 & 800) x 13) Polishing File x 14) Sanding Stick #1000 x 15) Multi Purpose Plastic Part Separator x 16) 15CM Metal Ruler x 17) Entry Model Nipper (Double-bladed) x 18) Hobby Knife x 1 (Includes 5 replacement blades & cover)9) Adjustable Fine Pin Hand Drill Set (Includes 5 exchangeable pin heads) x 110) Curved Tip Tweezer x 111) Straight Tip Tweezer x 112) Metal File Set (3 different shaped metal files) x 113) Fine Tip Panel Liner/Marker x 114) Cross Head Screw Driver x 115) Flat Head Screw Driver x 116) Precision Scissors x 117) Plastic Container/Organizer x1
Grab yours now and start building!
Bandai China has released a new line of Cross Contrast Colors model kits based on the popular Mobile Suit Gundam SEED series. These distinctive models are differentiated by their distinct color treatments, which are paired with clear sections to create a dramatic and bright appearance.
The MG 1/100 Providence Gundam (Cross Contrast Colors) Clear Red is a striking model kit with a vibrant color scheme. This special variant of the Providence Gundam has mostly red armor, with clear and solid components for a unique visual impression.
Quantity: 4 pieces of each Grit/packSize: 70 x 20 x 3mmGrit: #320 #400 #600 #800 #1000
Perfect for hard-to-reach areas
Good sized to fit curved surface, arched edge and to reach small and narrow spot
Outstanding durability and performance with high efficiency
Can be bent into any shapes easily and is more flexible than sandpaper with plate backing
Friends, you’ve been waiting for this for a long time!!
Things you’ve all been asking for! Affordable! Aesthetic! Comes with a cap! Multi-functional! Lightweight plastic body! MAD brand new chisel handle is finally here!!! They are made by the renowned injection molding process!
For all of you who love building scale models, a good quality handle for your beloved chisels is of utmost importance. So today, we bring you our new multi-function plastic handle. This is a must have tool for every scale model project.
#Three choices of colors: red, silver, or black.
Advantages and Features:
Lightweight Body. This design in keeping metal component at the front of the handle redistributes its weight, and improves your scribing experience.
Affordability is the Key! Suitable for beginners and for those who want to buy over 10 pieces all at once. Now you do not need to bother with switching out the blade halfway through your work
4-Jaw Chunk. It can hold many types of chisels and blades: DLC series, Light series, Tungsten Steel (TS) series, Mr.Pro XXX series, triangular scraper, as well as our collection of wide chisels
Aesthetic! Even though each handle was created using injection molding process, we added beautiful texture to improve its finish.
Anti-Slip Design improves grip. Hexagonal body makes sure the handle does not roll around.
Every handle comes with sticker labels for different chisel sizes.
This plastic handle is versatile, suitable for every scale model projects. Whether it is for general use, scribing panel lines, or detail customization, this handle can sure get the job well done!
Collet chunk can hold round tang with diameter between 2.5-3.1mm; or rectangular tang 6.0x0.6mm
Friends, you’ve been waiting for this for a long time!!
Things you’ve all been asking for! Affordable! Aesthetic! Comes with a cap! Multi-functional! Lightweight plastic body! MAD brand new chisel handle is finally here!!! They are made by the renowned injection molding process!
For all of you who love building scale models, a good quality handle for your beloved chisels is of utmost importance. So today, we bring you our new multi-function plastic handle. This is a must have tool for every scale model project.
#Three choices of colors: red, silver, or black.
Advantages and Features:
Lightweight Body. This design in keeping metal component at the front of the handle redistributes its weight, and improves your scribing experience.
Affordability is the Key! Suitable for beginners and for those who want to buy over 10 pieces all at once. Now you do not need to bother with switching out the blade halfway through your work
4-Jaw Chunk. It can hold many types of chisels and blades: DLC series, Light series, Tungsten Steel (TS) series, Mr.Pro XXX series, triangular scraper, as well as our collection of wide chisels
Aesthetic! Even though each handle was created using injection molding process, we added beautiful texture to improve its finish.
Anti-Slip Design improves grip. Hexagonal body makes sure the handle does not roll around.
Every handle comes with sticker labels for different chisel sizes.
This plastic handle is versatile, suitable for every scale model projects. Whether it is for general use, scribing panel lines, or detail customization, this handle can sure get the job well done!
Collet chunk can hold round tang with diameter between 2.5-3.1mm; or rectangular tang 6.0x0.6mm
Bandai brings us the awesome-looking Figure-rise Standard MetalGarurumon, the newest Digimon from the classic "Digimon Adventure" series in the Amplified series!
Gabumon's Mega form is here, and it's styling, from his fearsome feral form to the high-energy wings, to the strong, bendable joints. The articulation has had careful detail considered, allowed for natural, beast-like poses - a special inclusion that Digimon fans will appreciate.
MetalGarurumon's jaw can open and close naturally and with ease, as well. Make sure to use the included action base to recreate all of your favorite MetalGarurumon scenes and illustrations!
Order today!
[Accessories]
Action base
Foil sticker
Your 30MS (30 Minutes Sisters) figures deserve a little magic, and here's a fine assortment of magical-type weapons for them to use!
Their parts can be rearranged to create your own custom armaments, and effect parts and hands are also included. These items can also be used with 30MM (30 Minutes Missions) figures.
Order yours today!
