Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Quantity: 20 pieces/packSize: 90 x 20mm
Save time trimming and replacing sand paper; MADWORKS Adhesive Sanding Papers are the perfect choice for large sanding jobs.
Comes with the most commonly used grits, these low-tack sanding papers minimize the chance any residue are left on the Acrylic Grinding Plate. We package them like a pack of gum so it is easy to organize: no more messy work space or trimming of sand papers.
Perfect size for MADWORKS Acrylic Grinding Plates
The extra bit of sand paper can be folded such that the grinding plate can reach into corners and tight area.
Outstanding durability and performance with high efficiency
Quantity: 20 pieces/packSize: 90 x 20mm
Save time trimming and replacing sand paper; MADWORKS Adhesive Sanding Papers are the perfect choice for large sanding jobs.
Comes with the most commonly used grits, these low-tack sanding papers minimize the chance any residue are left on the Acrylic Grinding Plate. We package them like a pack of gum so it is easy to organize: no more messy work space or trimming of sand papers.
Perfect size for MADWORKS Acrylic Grinding Plates
The extra bit of sand paper can be folded such that the grinding plate can reach into corners and tight area.
Outstanding durability and performance with high efficiency
Quantity: 10 pieces/packSize: 70 x 20 x 2mmGrit: #1500
Perfect for hard-to-reach areas
Good sized to fit curved surface, arched edge and to reach small and narrow spot
Outstanding durability and performance with high efficiency
Can be bent into any shapes easily and is more flexible than sandpaper with plate backing
The official BANDAI SPIRITS nippers, a must-have for plastic modelers, are finally here!
With these, anyone can make their plastic modeling debut today!
The basic specifications are recommended for beginner plastic modelers, and there are multiple grip colors to choose from!
*Please note that some of the photos and illustrations of the products may differ from the actual products.
Please note that product names, specifications, release dates, prices, and other information on this web page are subject to change.
The package, logo, and product specifications are subject to change without notice.
Athrun Zala from "Gundam Seed Freedom" is the star of this acrylic stand from Plex, with relaxing watercolor-like tones in the background! This is a great way to display your favorite characters without taking up too much room on your shelf.
Place your order today!
[Size]: Approximately 11.5cm tall
[Materials]: Acrylic
The Shin Burning Gundam from the upcoming "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse" gets a new High Grade (HG) model kit from Bandai!
It comes with various effect parts, including cloak effects based on the Master Gundam. A polarized resin has been used for the clear parts, giving them a unique color-changing effect when viewed from different angles. This mighty mech comes with its sword, scabbard, and three sets of interchangeable hands.
Order it for your own collection today!
The Gundam 00 Diver Arc from the upcoming "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse" gets a new High Grade (HG) model kit from Bandai!
The effect parts in this kit are made with a special resin that absorbs light and emits it for a luminescent look! The GN drive is equipped with a telescopic gimmick that's newly molded, and 3D metallic seals are used to produce a highly glossy three-dimensional effect. Detachable and deformable gimmicks for the shoulder parts are included too.
Order it for your own collection today!
More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot!
From the "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses.
Weapons include three beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword. A display stand is included to assist with mid-air poses. Sharply molded in color, this snap-fit assembly kit does not require any cement or paint to complete (of course, the use of paint will improve the appearance of a finished model). Stickers and dry transfers are included for markings.
Sharp!
Celebrating the 10 anniversary of Gundam Seed (and the rerelease of the anime on Blu-ray) Bandai has released their 'remastered' versions of their great HG kits from years gone by.
Forbidden Gundam is identical to the initial release but now comes in colors matching the Blu-ray anime, marking stickers, and an extra part that lets you attach Forbidden Gundam to an action base 2 (sold separately).
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai's SD Gundam EX Standard lineup features stylish proportions and newly designed joints for improved posability, as well as parts and weaponry that can be swapped with HG kits! Each comes with foil stickers for the markings.
Raider Gundam from "Mobile Suit Gundam Seed" joins the FULL MECHANICS model-kit lineup from Bandai!
High-density details and ease of assembly are the hallmarks of this line; the Raider can be transformed from MS to MA form by sliding mechanisms and movable axis in various places!
The legs have multiple joints to reproduce the transformation to MA form, while ensuring a wide range of motion. The shoulder gimmick means it can transform into MA form without replacing any parts! The change of the head to MA form is reproduced with interlocking movements in each link mechanism.
The wire in the Mjolnir weapon is made with posable lead wire, which is stored in Mjolnir's spine when not in use. The claw unit is flexible on each axis; the shield cannon attaches to the arm in MS form and the shoulder in MA form. It can also be hand-held by expanding the grip! Display parts for MA mode are included, and you can also display it with FULL MECHANICS Calamity Gundam (sold separately) on board!
Order this spectacular Gundam for your own collection now!
The Forbidden Gundam from "Mobile Suit Gundam SEED" joins the "FULL MECHANICS" model-kit lineup from Bandai! This kit achieves both high-density detail and ease of assembly; it's loaded with dense mechanical modeling, from the inside of the exhaust port to the mold behind the armor.
The place parts of the Jufunshuren "Nidhoggr" have two types of surface finish to express the difference in texture; the energy cable connected to the backpack is reproduced with the attached varnish tube.
The "Geschmeidig Panzer" energy deflection armor has a flexible arm and a shield. Multiple axes of movement are provided at the connecting part of the backpack so the angle of movement can be adjusted. The collar is movable in conjunction with the rotate of the chest intake block.
With a structure in which the head sinks according to the movement, the backpack moves without interfering, and transforms into a high-speed assault form with minimal motion. In addition to deploying the 88mm railgun "Eckzahn," it's also possible to rotate the local generator that changes the trajectory of Fresberg.
Order it for your own collection today!
Shin Asuka's Force Impulse Gundam, seen in the first half of "Mobile Suit Gundam Seed Destiny," gets a new Real Grade kit from Bandai!
It features an internal body frame that can be separated from the runners already assembled, meaning much less work for you to do, and amazingly precise details as well! It's molded in color for a screen-accurate appearance.
The Force Silhouette's gimmicks, texture and details are carefully reproduced, complete with the wings that fold backwards. The forearm can twist on a separate axis from the elbow for a realistic range of motion, and the shoulder armor rotates independently, reducing part interference. The knee armor is also movable in conjunction with the motion of the leg; four pairs of hands are included, as are plenty of weapons.
Place your order today and add this legendary Gundam to your lineup!
[Includes]:
High energy beam rifle
Mobile shield
Vajra beam saber (x2)
Folding razor vs. armored knife (x2)
Silhouette Flyer
Interchangeable hands (x8--4 each left and right)
Realistic decals
DSPIAE Markers are high-quality, professional-grade art markers designed for use in a wide range of modelling and creative applications. These markers are known for their exceptional color quality, durability, and precision, making them a favorite among artists, designers, and hobbyists alike.
Compared to traditional acrylic tips, DSPLAE's nylon tip used on its markers features smoother paint flow, smoother coating and finer metal particles, further enhanced by self-leveling. formula, even novice users can easily achieve a stunning, professional finish.
Dual Tip Design - 0.5/2.0mm tips are installed/stored at the end of the marker/inside the cap. Wrap with a tissue to remove the installed tip and insert another one for a simple exchange that better meets your demands.Gently paint the piece with a long, even stroke with a unidirectional movement, avoid painting in a cross pattern.
Before first use, shake well and squeeze the tip to release trapped air.Do not touch the paint coating until it is completely dry after 12 hours.
Get yours now!
The latest 30MM EXM-A9n Spinatio model comes in a ninja specification!
In addition to the main body, the armor parts and weapon parts are are an all-in-one unit included with the figure! It boasts a new structure that is even easier to assemble than past 30MM models.
Order now!
[Accessories]
Rifle
Blades x2
Hand parts
Ninja armor set
Joint parts
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them!
Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
From "Digimon: DIGITAL MONSTER X-evolution" comes the 'X ANTIBODY' version of Omegamon, joining the Figure-rise Standard Amplified series from Bandai!
It'll be approximately 20cm in height, and has connection holes in various places to allow for future expansion and customizations. The cloak can be expanded by changing the attachment position at the base.
Order this awesome kit for yourself today!
This new truss base display stage from Bandai is ideal for your 1/144-scale model kits!
You can customize it to your liking thanks to the 3mm holes all throughout the kit; four arm parts are attached, and the joints in the middle are movable. A set of joint parts is included too. It's perfect for robots, aircraft and just about anything else you can think of.
Order yours today!
[Includes]:
Base (x2)
Display truss (x3)
Catwalk (2 types) (x4)
Joint parts
