This model kit of Scorbunny from "Pokemon" is easy and quick to assemble, making it fun and relaxing for first-time modelers and pros alike!
He's made with just 20 parts that are molded in color; the parts remove easily from the runners with no need for tools.
You'll love it -- get yours today!
This "Pokemon" model kit from Bandai features fast and easy assembly!
Eevee is made up of 20 parts; you don't need tools to remove the parts from the runners, and he snaps together so glue isn't needed! He also comes molded in color, so you don't need to paint him.
A minimal amount of seals are needed (and included) to make him all complete. You'll love him -- order yours now!
This "Pokemon" model kit from Bandai features fast and easy assembly!
Pikachu is made up of 15 parts; you don't need tools to remove the parts from the runners, and he snaps together so glue isn't needed! He also comes molded in color, so you don't need to paint him.
A minimal amount of seals are needed (and included) to make him all complete. You'll love him -- order yours now!
Beelzemon, the Demon King Digimon from "Digimon Tamers," has been added to Bandai's Figure-rise Standard Amplified model-kit series!
The Berenjena shotgun weapons can be attached to its legs with joint parts; lead wires are used for the hair and tail, and two sets of interchangeable hands are included. Expansion ports are also included.
Order yours today!
Bandai brings us a new Figure-rise Standard Amplified model kit of the Alphamon from "Digimon X-Evolution"!
The parts division is carefully designed to make the different-colored areas on the Alphamon stand out; the booster on its back is equipped with a movable fin that's original to this model! The cloak is made of an ultra-thin PET sheet for expressive posability. An effect sheet is included, too.
Order this impressive beast for your own collection now!
Last piloted by Char Aznable in "Char's Counterattack," the sizzlin' Sazabi now joins Bandai's HGUC series as a superbly detailed snap-fit plastic kit!
Molded in color, the Sazabi will be fully poseable with polycap joints upon completion. Its features include a movable mono eye and openable funnel containers, and this Mobile Suit is fully equipped with 12 funnels (six in storage mode and six in deployed mode), a beam shot rifle, two beam sabers, a shield, and a beam tomahawk with two optional beam parts. Stickers for its mono eye and markings are provided.
The Dreadnought Gundam is a hot Mobile Suits Variation, based on Gundam SEED designs (specifically the Astray). This 1/144-scale HG model reproduces this fantastic Mobile Suit in super detail, with its distinctive, gigantic red backpack!
Bandai's multi-gate molding technology allows multiple colors to be blown on a single sprue, keeping the number of sprues to a minimum (keeping costs lower, and the savings are passed on to you!). And since all the parts are molded in color, you don't need to paint the kit; since they all snap together for assembly, you don't need to glue it, either!
Polycaps are included for joints, so the finished product can be posed easily. Lots of sharp customised foil and clear stickers are included for a superb finish. Don't miss out on a fantastic variant of a popular mecha!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The legendary Gyan gets the REVIVE treatment with this new release from Bandai!
Features increased detail and articulation as well as a stylish new redesign. All parts come molded in multiple colors with foil stickers included to add extra color.
Also includes the Gyans famous clear yellow beam saber and missile shield!
The Demi Barding, as seen in "Mobile Suit Gundam: The Witch from Mercury," gets a new 1/144-scale HG model kit from Bandai!
It's equipped with its characteristic large backpack; the thrusters attached to its legs can be moved forward to store the beam saber. The beam rifle can also be held with both hands by moving the auxiliary grip.
Order it for your own collection today!
Bandai marks the 10th release in their Real Grade line with the mighty Zeta Gundam.
In the anime, and in MG and PG kit forms, the Zeta transforms into its Wave Rider form and the big question being asked when Bandai announced an RG Zeta was if it would a transforming kit. And it is!
Bandai's RG MS Advanced Joint frame took 1/144 scale kits to a whole new level and the Zeta raises the bar again thanks to the amazing transformation engineering. Like previous RGs the Zeta features various armor color tones as well as an abundance of marking stickers but this guy can transform!
At long last the Banshee has arrived! Similar to its predecessor, the Unicorn Gundam, the Banshee has a psycho frame this time in gold but the headgear is slightly different.
He also comes with weapons which mount to his forearms for extra firepower.
Designated with the number of the beast, NZ-666 Kshatriya is one devastatingly powerful Mobile Suit that's to be feared especially when it is equipped with multiple beam cannons on its chest and binders, as well as 24 funnels and four hidden arms underneath the binders.
Nicknamed "The Sleeved," the Mobile Suit piloted by Neo-Zeon ace pilot Marida Cruz is represented in sharp detail as this snap-fit plastic kit model with parts molded in color and will stand 15.5cm tall upon completion. Its four binders are movable and feature a locking mechanism on each binder for maintaining them in fixed poses.
There are six funnels underneath each binder along with a flexible arm. Includes two beam sabers and a sheet of foil stickers.
The classic RX-78-02 enters the HG line anew with a version of the kit based off its appearance in "Gundam The Origin!" A perfect way to kick off the new year celebrating Gundam's 40th anniversary.
Thanks to the provided option parts, you can build either the early or mid version of the RX-78-02.
The early version features asymmetrical left and right sides and includes a gatling gun equipped on the forearm. The left and right shoulders feature a Shoulder Magnum and Vulcan canon respectively, contributing to the asymmetrical look.
For the mid version, both sides are symmetrical, including the shoulders which are built with flat panels instead of weaponry.
Adjustable vernier are also included on the backs of the calves, with a cover that lets you display or hide the features. The toe tips are articulated, too.
Introducing the 'Forest Summer FANTASY GIRLS' Series by NUKE MATRIX!
Crafted under the creative direction of NUKE MATRIX, their new line of beautiful girl model kits is here to shine! The mecha girls from the company's sci-fi model series 'Cyber Forest' are now back and turning heads in their stunning swimsuit versions!
Kicking off this glamorous series is 'Vivian Hayha', whose two-different-colored eyes are her most charming feature! Stay tuned for more exciting additions to the 'Forest Summer FANTASY GIRLS' series.
Get yours today!
Tomica adds the Mitsubishi Lancer Evolution VII that appeared in "Fast & Furious" to their "Tomica Premium Unlimited" series!
Order this iconic vehicle for your own collection today!
