Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
This "Pokemon" model kit of Squirtle is easy to assemble, even for first-time modelers!
You'll love his cute pose and colorful finish; he's molded in color so paint isn't needed, and the parts remove easily from the gates without the use of tools!
You'll love him -- order him for your own collection today!
The ever-popular and adorable Eevee from "Pokemon" gets a plastic model kit from Bandai!
Eevee will come with two expressions to choose from (normal, smiling).
Order today, and build your own Eevee!
Quantity: 20 pieces/packSize: 90 x 20mm
Save time trimming and replacing sand paper; MADWORKS Adhesive Sanding Papers are the perfect choice for large sanding jobs.
Comes with the most commonly used grits, these low-tack sanding papers minimize the chance any residue are left on the Acrylic Grinding Plate. We package them like a pack of gum so it is easy to organize: no more messy work space or trimming of sand papers.
Perfect size for MADWORKS Acrylic Grinding Plates
The extra bit of sand paper can be folded such that the grinding plate can reach into corners and tight area.
Outstanding durability and performance with high efficiency
This model kit of the beloved Pikachu from "Pokemon" is part of a brand-new lineup from Bandai!
It assembles fast and easy, with just 15 pre-colored parts and a minimum amount of stickers. Tools aren't necessary to remove the parts from the sprues, too, making it perfect for anyone who's new to building plastic models. Pikachu will be about 7.5cm tall when assembled.
Makes a great gift for anyone, including you -- order today!
Piloted by Banagher Links, the PG Unicorn is the first Perfect Grade Bandai kit in four years, and the most impressive to date. A spectacular separate LED kit can be purchased to bring Unicorn to life in light on display! Fans can expect an array of extraordinary features from this kit --
A perfect reproduction of the transformation from Unicorn mode to Destroy mode (face guard expansion included)
The full-body red Psychoframe employs special transluscent plastic for the 30-piece LED kit (sold separately) to shine through
The blade antenna, which can be expanded or collapsed for transformation, utilizes a magnet to display a beautiful, single horn in Unicorn mode, and the inner parts of the horn expose colored gold in Destroy mode
Elbows and knees are made to achieve the utmost range of movement without detracting from the appearance of their exteriors
Armament units around the knees are moveable in every mode
BlackWarGreymon from "Digimon Adventure 02" joins the "Figure-rise Standard" model-kit lineup from Bandai!
It's fully posable after assembly, able to raise both arms, curve its chest and spread its legs for a powerful stance; its range of motion is so wide, it can wild the special moves "Gaia Force of Darkness" and "Dramon Killer"! The shield can be moved independently, and can be angled according to the pose. Stickers are included for the markings, too.
Order this formidable warrior for your own collection today!
ShineGreymon from "Digimon Savers" joins the "Figure-rise Standard Amplified" model-kit series from Bandai!
This light dragon type Digimon features pull-out shoulder joints to expand the range of movement, enabling him to hold the Geo Gray Sword with both hands! A movable axis in the tip of each foot enables him to stand firmly; the armor behind the knees is linked to the legs for a greater range of motion.
The enormous Geo Gray Sword features jewel seals and PET seals, and in an original gimmick for this model, it can transform into a twin sword mode with parts replacement! When in twin sword mode, it can be mounted on each of ShineGreymon's legs. Each of the feathers on his wings can be individually moved, and a lead wire is built into his tail for flexibility. Hard points are placed in various areas throughout his body for expandability, too.
Order him for your own collection today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Shinn Asuka from "Gundam Seed Freedom" is the star of this acrylic stand from Plex, with relaxing watercolor-like tones in the background! This is a great way to display your favorite characters without taking up too much room on your shelf.
Place your order today!
[Size]: Approximately 11.5cm tall
[Materials]: Acrylic
Kira Yamato from "Gundam Seed Freedom" makes this acrylic pen stand from Plex something you'll want to have in your collection, or on your desk!
Order yours today!
[Size]: Approximately 10cm high
[Materials]: Acrylic
Kira Yamato and Athrun Zala from "Gundam Seed Freedom" makes this acrylic pen stand from Plex something you'll want to have in your collection, or on your desk!
Order yours today!
[Size]: Approximately 10cm high
[Materials]: Acrylic
Cagalli Yula Athha from "Gundam Seed Freedom" is the star of this acrylic stand from Plex, with relaxing watercolor-like tones in the background! This is a great way to display your favorite characters without taking up too much room on your shelf.
Place your order today!
[Size]: Approximately 11.5cm tall
[Materials]: Acrylic
To help celebrate the 40th anniversary of Gunpla, Char's Zaku II from "Mobile Suit Gundam" appears in the HG series with new modeling, taking advantage of the newest technology!
The mono eye is movable by moving the operation rib on the back of the head, and the arms now rotate at the forearm in addition to the upper arm, for a wider range of motion. Soft material parts are included that further expand the range of motion at its waist, and its weapons can be attached to its waist too.
rder it today!
Alcremie is now part of Bandai's "Pokemon Plamo Collection Quick!!" model-kit lineup!
He's easy and fun to assemble, with pre-colored parts that can be removed from the sprues by hand. Stickers are included for his markings.
You'll love it -- order yours now!
This model kit of Jigglypuff is easy and simple to assemble -- it's perfect for your first plastic model experience!
It'll be about 7.5cm tall when assembled, and since the parts are molded in color, you don't need paint. The parts are easy to remove from the runners too -- no tools are necessary!
You'll love it -- order yours now!
The adorable Mimikyu joins the 'Pokemon Plamo Collection Quick!!' series of plastic model kits from Bandai!
This easy-to-assemble kit has parts that have been carefully divided for easy assembly and a colorful finish with no extra work.
Order this kit for yourself today!
From Bandai's Pokemon Plamo (plastic model) Collection Quick series comes an adorable little sleeping Eevee!
The kit is snap-fit so you can assemble it without any glue, and you don't even need tools to remove the parts from the runners! Just snap the colored parts loose from the runner then press them together and you'll have yourself a figure of Eevee in no time. The kit features 16 parts in total, and will be 115mm long when completed.
Reserve Eevee for your collection today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Build up a Zaku Warrior, then add Blaze or Gunner parts as you wish!
This terrific snap-together kit contains parts for both versions, as well as clear plastic plates featuring Athrun Zala (Blaze Zaku Warrior) and Dearka Elthman (Gunner Zaku Warrior). All the parts are molded in colour, and polycaps are included for poseable joints. Stickers are included for extra detail.
An extremely cool set!
Ramba Ral’s MS-07B Gouf gets the “Revive” treatment with this new release from Bandai! This kit features a slick new redesign with better details and articulation.
All parts come come molded in multiple colors and features a snap-fit construction. Comes with two Heat Swords, Heat Rod, Shield and 5-barrel 75mm Machine Gun left hands!
