The Witch From Mercury

A Gunpla model from "Mobile Suit Gundam: The Witch from Mercury" is now available!FULL MECHANICS 1/100 Gundam Aerial is now available in Ichiban Kuji limited edition solid clear color! Get one for yourself now!

Read more less

Gunpla from "Mobile Suit Gundam: The Witch from Mercury" is now available!FULL MECHANICS 1/100 Gundam Aerial is now available in the Ichiban Kuji limited edition Solid Clear Another Color! Get one for yourself now!

Read more less

Bandai's 1/144-scale HG model kit of the Schwartzette from "Mobile Suit Gundam: The Witch from Mercury" looks amazing, with an innovative series of joints in its torso for lifelike flexibility, plus its unique weapon! Order yours now!

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for Gundam Aerial! Can be combined with the Gundam Aerial Permet Effect Unit + Gund-bits Weapon Display Base to showcase Gundam Aerial at its finest! Suitable for: High Grade Gundam Aerial High Grade Gundam Aerial Rebuild High Grade Gundams from 'The Witch From Mercury' Model kit and Effect Unit + Weapon Display Base is not included.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for the High Grade Gundam Aerial! Can be combined with the 'The Witch From Mercury' Display Stand to showcase Gundam Aerial at its finest! Model kit, Gund-bit Weapons are not included.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for the Full Mechanics Gundam Aerial! Can be combined with the 'The Witch From Mercury' Display Stand to showcase Gundam Aerial at its finest! Suitable for: Full Mechanics Gundam Aerial Model kit, Gund-bit Weapons are not included.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for Gundam Aerial! Can be combined with the Gundam Aerial Permet Effect Unit + Gund-bits Weapon Display Base to showcase Gundam Aerial at its finest! Suitable for: Full Mechanics Gundam Aerial Model kit and Effect Unit + Weapon Display Base is not included.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for the High Grade Gundam Aerial Rebuild! Can be combined with the 'The Witch From Mercury' Display Stand to showcase Gundam Aerial Rebuild at its finest! Model kit, Gund-bit Weapons are not included.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Beautify your display setup with this effect accessory set, specially crafted for Gundam Aerial! Can be combined with the Gundam Aerial Permet Effect Unit + Gund-bits Weapon Display Base to showcase Gundam Aerial at its finest! Suitable for: Full Mechanics Gundam Aerial Model kit and Effect Unit + Weapon Display Base is not included.

Read more less

The Gundam Aerial from "Mobile Suit Gundam: The Witch of Mercury" gets a new SD Gundam EX model kit from Bandai! It's adorably super-deformed, yet stylish and highly detailed, with a high degree of posability; it comes with its beam saber, beam rifle and shield. The rifle can be stowed on the back, and the shield can be separated and connected to the shoulder, too. Order yours now!

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

The Dilanza piloted by Guell Jetterk in "Mobile Suit Gundam: The Witch of Mercury" gets a new HG model kit from Bandai! Its movable axis means it can get into tons of bold action poses after assembly; the neck block that connects the head and torso is equipped with a double ball joint for superior flexibility. The shoulder shield is also highly posable, and various parts of the fuselage have built-in gimmicks for profound action. The Dilanza's characteristic antenna and feather decoration has also been reproduced; the backpack can be attached and removed as you like. Rifles and torches can be stored behind the shield, and the beam partisan, beam torch and beam rifle are included. Order yours now! [Includes]: Beam partisan Beam torch Beam rifle Stickers

Read more less

This new HG model kit of the Dilanza from "Mobile Suit Gundam: The Witch of Mercury" can be assembled as a general version, or as the special unit used by Character A with parts selection! Shoulder parts and antenna for the general version are included, as are shoulder parts and antenna for Character A's ride; the huge axe weapon is included too. The range of movement is expanded by opening and closing the rear armor. The torch includes clear effect parts for a realistic look, and both the effect parts and the torch itself are removable. The torch can be stored behind the shoulder shield on both versions, too. Order yours now!

Read more less

The Gundam Caliburn from "Mobile Suit Gundam: The Witch From Mercury" is now a "SD Gundam Cross Silhouette" model kit from Bandai! Parts to duplicate the rainbow-colored shine that covers the whole body shell when the Permet Score exceeds 8 are included; the non-emitting shell unit is reproduced with smoked black parts, and the red shell unit representing Permit Score 5 is also reproduced with stickers! You can use the SD frame or the CS frame into the upper body to select your favorite head and body shape. Interchangeable hands including hands for holding weapons, and flat hands. The bit-on form that attaches the bit stave to the body is also reproduced, and the quadra thruster at the rear of the variable rod rifle can be opened and closed. The legs have movable parts that can be transformed into high maneuver mode, too! Order it for your own collection today! [Includes]: Variable rod rifle Escutcheon Beam saber (grip) (x2) Hand parts (x1 set) Stickers

Read more less

NOTE: This listing is for Gundam Calibarn only In this 24th edition of "FW Gundam Converge," Bandai brings us two Mobile Suits from "Mobile Suit Gundam Seed Freedom," as well as the Gundam Caliburn from "Mobile Suit Gundam: The Witch From Mercury"! The Re-Gazi from "Mobile Suit Gundam: Char's Counterattack," the Re-Gazi (Unicorn version) from "Mobile Suit Gundam UC," and the Zaku Tank from "Mobile Suit Gundam MSV" are also part of the lineup! There are six different highly detailed super-deformed figures to collect and trade; each one comes with a base and a piece of soda-flavored gum, and they're randomly packed in boxes of ten. Order yours today! [Size]: Approximately 5.5cm x 4.5cm [Materials]: PVC, MABS, ABS

Read more less

The Lfrith Ur from "Mobile Suit Gundam: The Witch from Mercury" is now part of Bandai's "HG" model-kit series! It comes with its characteristic large backpack, special weapons and beam saber. Order it for your own collection today!

Read more less

The Demi Barding, as seen in "Mobile Suit Gundam: The Witch from Mercury," gets a new 1/144-scale HG model kit from Bandai! It's equipped with its characteristic large backpack; the thrusters attached to its legs can be moved forward to store the beam saber. The beam rifle can also be held with both hands by moving the auxiliary grip. Order it for your own collection today!

Read more less

"Gundam Calibarn" from the series Mobile Suit Gundam: The Witch from Mercury is now available in the CHOGOKIN line-up! It consists of light-emitting gimmicks and die-cast parts! The light is emitted by attaching clear parts on top of the light-emitting unit built into the main body, and by making the clear parts black "except for the lines of the shell unit," the shape of the lines is more clearly expressed.Additionally, it comes with three light-up units: one that lights up the chest and head, and two that light up each of the thighs; and when they're all lit up it's a truly spectacular sight! Furthermore, by replacing the clear parts of the shell unit throughout the body, you can also recreate the rainbow glow.The replacement clear parts are black except for the shell unit lines, just like the ones included with the main unit. To express the Permetto Score Five state, an internal light-emitting unit is used, but for the rainbow light-emitting state of this product, the clear parts are "IRIS plated" to reflect the light from outside, expressing a complex and diverse sparkle! Get this spectacular figure for yourself now! Size: Approx. H188mmMaterial: ABS, PVC, DiecastBattery Type: LR41 x7 (test batteries included)[Set Contents]- Main part- Alternative hand part (Left / right) x3 each- Alternative shell unit part set- Variable rod rifle- Shield grip set- Gun bit set- Display joint part- Beam saber x2- Shield base- Beam saber blade x2- Gun bit supporting pole set- Base set

Read more less

Premium Bandai announces the addition of the Gundnode, the mobile suit-type Gund-bit that appeared in the final episodes of the Mobile Suit Gundam: The Witch from Mercury series! The Gundnode model kit is a work of art in terms of design and craftsmanship, provided with an entirely new mold that perfectly preserves the legendary unmanned mobile suit form. The use of clear elements for the shell units throughout the suit results in a beautiful visual portrayal of the Gundnode's exquisite details. Additionally, the model includes foil stickers that imitate the brilliant red and blue light-emitting states of its shell units, bringing the mobile suit to life.

Read more less