Model Kit Accessories

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Full Price Preorder: $15.90 ($17.90 after PO period) This item is currently pre-order only, ETA is October 2024. If you have any queries, do contact us via Whatsapp to enquire, thank you! Preorder Information: Any other items placed in the same order as preorder items will only be delivered after all items in the order arrive. Preorder items are NOT ELIGIBLE for any discounts. Preorders may be subjected to manufacturing and shipping delays, which are not within our control. We will still try our best to fulfill your order ASAP. Full refund will be issued if your order is not allocated. There will be no refund for cancellations. ---------------------------- A range of equipment designed based on the Sword Impulse Gundam, EW presents this set of 1/144 scale armaments and weapons to allow customizations on your Gunpla! Red and Blue versions available! Get this set for yourself now! Contents: Sword Impulse Gundam backpack Beam Sword x2 Beam Boomerang x2

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Bandai's new Action Base 8 features easy assembly with no screwdriver required! It's ideal for 1/100-scale models, and can securely support your favorite items in a wide range of poses! In order to stably hold a large plastic model, the angle of the support is fixed with a hexagon socket head bolt. Wrench parts are included, and can be assembled without a screwdriver. The design pursues simplicity with a cylindrical base shape; each axis is movable to create a wide range of display poses, and it provides solid support for both grounded and airborne poses. You'll love it -- order yours today! [Includes]: Base parts Strut parts Bolts (x4) Nuts (x4) Wrench parts (x5) Joint parts (x1 set)

Read more less

Full Price Preorder: $22.90 This item is currently pre-order only, ETA is Q4 2024. If you have any queries, do contact us via Whatsapp to enquire, thank you! Preorder Information: Any other items placed in the same order as preorder items will only be delivered after all items in the order arrive. Preorder items are NOT ELIGIBLE for any discounts. Preorders may be subjected to manufacturing and shipping delays, which are not within our control. We will still try our best to fulfill your order ASAP. Full refund will be issued if your order is not allocated. There will be no refund for cancellations. ---------------------------- The 1/100 White Jetpack Expansion Set by Red Lotus is designed based on the Proud Defender from Gundam Seed Freedom! This kit allows modelers to convert their 1/100 Strike Freedom Gundam model into the Mighty Strike Freedom Gundam! This kit also comes with a pair of Futsunomitama swords that can be docked behind the Proud Defender when not in use.  The gold parts on its wings are provided with chrome plate for luxurious effect. Get this set for yourself now! Compatible with: MGEX 1/100 STRIKE FREEDOM GUNDAM MG 1/100 STRIKE FREEDOM GUNDAM DABAN 8802/8802S STRIKE FREEDOM GUNDAM

Read more less