Iron-Blooded Orphans

From "Mobile Suit Gundam: Iron Blooded Orphans," arrives the fourth form of the main Gundam, Barbatos, as an MG! The internal mechanisms such as the Gundam from and Ahab Reactors, have been thoroughly recreated. Features excellent color separation, improved dynamic movement gimmicks, and plentiful option parts.  Barbatos' fourth form colors have been replicated with precision, and the internal parts such as the Gundam frame have been carefully crafted to match their appearance in the series. The cylinders in the frame employ silver plating for extra detail, and the chest features a gimmick to allow rotation of the Ahab Reactors for the first time in an MG. The inner frame, cylinders, and armor are linked by a moveable axis in the upper body to improve posing ability. Barbatos' knees also move in conjunction with their cylinders, expanding range of motion and offering a natural look when standing. Left to right movement of the waist has been articulated to allow for distinct down-facing posing, too. In addition to the wealth of possibilities in the kit itself, the weapon parts also feature satisfying gimmicks, such as a sliding and folding gimmick on the glide gun. Add this impressive MG to your own lineup and enjoy all the intricate posing options it has to offer!

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

The newest form of the Gundam Barbatos makes its model kit debut! New color additions, a redesigned exterior, improved articulation in the shoulder area for increased posability, and new armaments all make this a Gundam not to be missed! Includes the sword mace, two backpack arms, two joints, and hands to hold the weapons.  Order yours today!

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

The Sigrun (or Siegrune) from "Mobile Suit Gundam: Iron-Blooded Orphans G" joins the HG model-kit lineup from Bandai! This game-original Gundam comes with its Valkyrie Rapier and Valkyrie Round Shield are included, as well as interchangeable hands to hold them with. It's fully posable after assembly, so you can reproduce all your favorite scenes from the game. Place your order today!

Read more less

Cyclases's Schwalbe Custom from "Mobile Suit Gundam: Iron-Blooded Orphans Urdr Hunt" joins the HG model-kit lineup from Bandai! The vernier block attached to the rear skirt rotates in two places, and can be removed as well. Its signature weapons -- two handguns and a shield -- are included too. It'll be fully posable after assembly, too. Order yours now!

Read more less

Relegated to use as a generator after 3 centuries of neglect, the Gundam Barbatos was pressed into service during an attack by the enemy Gjallarhorn in "Mobile Suit Gundam: Iron-Blooded Orphans"! This HG version can swap weapons and armor parts with other kits in the series, and contains parts to build one of two different versions of the mech. Parts molded in dark gray, white, dark blue, yellow and red; foil stickers are included for the markings. Order yours today!

Read more less