Gundam Unicorn
FLAMING SNOW MG-26 | 1/100 FULL ARMOR UNICORN GUNDAM VER. KA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$10.90$8.90
FLAMING SNOW MGEX-63 | 1/100 UNICORN GUNDAM VER.KA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$8.90$7.90
FLAMING SNOW RG-22 | 1/144 SINANJU FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI PG 1/60 UNICORN GUNDAM
Piloted by Banagher Links, the PG Unicorn is the first Perfect Grade Bandai kit in four years, and the most impressive to date. A spectacular separate LED kit can be purchased to bring Unicorn to life in light on display! Fans can expect an array of extraordinary features from this kit -- A perfect reproduction of the transformation from Unicorn mode to Destroy mode (face guard expansion included) The full-body red Psychoframe employs special transluscent plastic for the 30-piece LED kit (sold separately) to shine through The blade antenna, which can be expanded or collapsed for transformation, utilizes a magnet to display a beautiful, single horn in Unicorn mode, and the inner parts of the horn expose colored gold in Destroy mode Elbows and knees are made to achieve the utmost range of movement without detracting from the appearance of their exteriors Armament units around the knees are moveable in every mode
$333.90$288.90
BANDAI SD GUNDAM EX STANDARD UNICORN GUNDAM (DESTROY MODE)
Bandai brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them! Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits! Get yours now!
$11.90$9.90
FLAMING SNOW RG-27-1 | 1/144 UNICORN GUNDAM 02 BANSHEE NORN (FINAL BATTLE VER.) FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-116 | 1/100 UNICORN GUNDAM PERFECTIBILITY FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
PREMIUM BANDAI MG 1/100 NEMO UNICORN (DESERT COLOR VER.)
The Nemo Unicorn is now available in the 1/100 scale! This variation with Desert Color makes it a unique piece for your collection, get yours today!
$47.90$41.90
BANDAI RG 1/144 UNICORN GUNDAM 02 BANSHEE NORN
The Unicorn Gundam 02 Banshee Norn gets a Real Grade model kit release from Bandai! It features a flexible inner frame for supreme posability after assembly, and it can transform into its Banshee Norn mode, too! It's equipped with two Beam Sabers, the Beam Magnum and an effect part, the Revolving Launcher, the Armed Armor DE, the Armed Armor XC, and realistic decals. Check out the limited-edition premium box version, too!
$66.90$58.90
BANDAI SD GUNDAM EX STANDARD SINANJU
Bandai's SD Gundam EX Standard lineup features stylish proportions and newly designed joints for improved posability, as well as parts and weaponry that can be swapped with HG kits! Each comes with foil stickers for the markings. Get yours now!
$11.90$9.90
PREMIUM BANDAI HGUC 1/144 REZEL (DEFENSER B-UNIT)
The RGZ-95 ReZEL (Defenser b-Unit) is the ReZEL equipped with the optional Defenser b-Unit backpack. Developed specifically for the ReZEL, the Defenser backpack is a space-use assault backpack for conducting rapid, preemptive attacks on the frontline or at enemy's stronghold. Due to the high skills needed to use the Defenser backpack properly, it is normally fitted on the ReZEL Commander Type, but there are cases of them being used by the normal ReZEL. Get yours today!
$39.90$34.90
KOSMOS LED UNIT FOR PG UNICORN GUNDAM 02 BANSHEE NORN
Beautify your display setup with this effect accessory set, specially crafted for Perfect Grade Unicorn Gundam 02 Banshee Norn by KOSMOS! Features: Customizable LED Unit for Main Body, DE Shield & Armed Armor Adjustable lighting colors effects (Require KOSMOS app) Perfect & easy fit Supports USB power source or battery (does not come with battery) Model kit and display stands are not included.
$104.90$89.90
BANDAI MG 1/100 UNICORN GUNDAM 02 BANSHEE
Until now there have been several Master Grade RX-0 Unicorn Gundam but there hasn't been an MG Banshee. Well, now everything changes with Bandai's new Master Grade RX-0 Unicorn Banshee! While it shares some design and engineering with the previous MG Unicorns it comes into its own with those enormous weapons mounted on the arms as well as new armor parts for the legs and even more psycho frame parts! Get yours now!
$90.90$79.90
FLAMING SNOW MG-47 | 1/100 SINANJU FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
BANDAI HGUC 1/144 UNICORN GUNDAM 02 BANSHEE (DESTROY MODE)
At long last the Banshee has arrived! Similar to its predecessor, the Unicorn Gundam, the Banshee has a psycho frame this time in gold but the headgear is slightly different. He also comes with weapons which mount to his forearms for extra firepower.
$30.90$26.90
BANDAI HGUC 1/144 NZ-666 KSHATRIYA
Designated with the number of the beast, NZ-666 Kshatriya is one devastatingly powerful Mobile Suit that's to be feared especially when it is equipped with multiple beam cannons on its chest and binders, as well as 24 funnels and four hidden arms underneath the binders. Nicknamed "The Sleeved," the Mobile Suit piloted by Neo-Zeon ace pilot Marida Cruz is represented in sharp detail as this snap-fit plastic kit model with parts molded in color and will stand 15.5cm tall upon completion. Its four binders are movable and feature a locking mechanism on each binder for maintaining them in fixed poses. There are six funnels underneath each binder along with a flexible arm. Includes two beam sabers and a sheet of foil stickers.
$73.90$64.90
BANDAI PG 1/60 UNICORN GUNDAM 2 BANSHEE NORN
The PG Banshee Norn shares the same frame with the PG Unicorn Gundam but instead of the Unicorn's Gatlings and Bazooka you get that massive Norn backpack as well as the giant shield and parts to make the launcher for the rifle. The Banshee comes with that giant display base and Detron stickers for markings. Get this remarkable kit for yourself now!
$369.90$319.90
BANDAI MG 1/100 UNICORN GUNDAM VER. KA
Veteran mecha designer Hajime Katoki again brings his style to Bandai's popular Master Grade (MG) series, this time with his design of Unicorn Gundam! The titular mecha from the "Mobile Suit Gundam Unicorn" serial novel comes sharply molded on colored runners and is capable of being switched between Unicorn Mode and Destroy (NT-D) Mode. In Unicorn Mode, the all-white Mobile Suit has a horn projecting from its forehead that resembles that of the mythical creature for which it was named. When switching to NT-D Mode, its armor slides open to reveal its psychoframe, the four blades on the shield expand outwards, its unicorn horn opens, and a Gundam face is revealed. Its armaments include four Beam Sabers, a Beam Magnum, Hyper Bazooka, and a shield. Sheets of foil stickers, Gundam decals, and marking stickers are included. Buy two kits and build them to display side by side, one in each mode--both designs look too cool to display only one at a time!
$83.90$71.90
BANDAI MG 1/100 NARRATIVE GUNDAM C-PACKS VER. KA
The Psycho Frame test machine Narrative Gundam C-Packs from "Mobile Suit Gundam Narrative" is the subject of this Master Grade Ver. Ka model kit from Bandai! It's equipped with a number of gimmicks created by Hajime Katoki. The thickness of the clear parts of the Psycho Frame are adjusted, with details engraved on the front, back and sides for a deep, three-dimensional shape. Depending on the angle it's viewed from, it reflects light like a crystal! A gray Psycho Frame that does not activate NT-D is included, and can be used selectively. The hip joints are movable for each block, and the fins on the back of the knees sink as the knees move, so the legs can be bent deeply without interference. It can be transformed from core block from to a bird-like core fighter by rotating the nose, and it comes with a C-equipped beam rifle that's an improved version of the Jegan rifle; you can reproduce both types with parts replacement. Two figures of Jona Bashta are included: sitting and standing. Order this amazing Gundam for your own collection today! [Includes]: Shield Beam rifle Beam rifle reproduction parts for Jegan (x1 set) Beam saber (x2) Body reproduction parts (x1 set) Landing gear parts for Core Fighter (x1 set) Hand parts (x1 set) Figures (x2) Psycho Frame parts for when NT-D is not activated (x1 set) 3D metallic stickers Waterslide decals
$116.90$99.90
BANDAI HGUC 1/144 FULL ARMOR UNICORN GUNDAM (DESTROY MODE)
You absolutely do not want to get the Full Armor Unicorn Gundam in Destroy Mode angry at you! It comes with enough armaments to outfit a small army: two hyper bazookas, the Beam Magnum, four Beam Sabers, two Beam Saber blades, two anti-ship missles, two grenade launchers, four six-part hand grenades, six Beam Gatling Guns, its shield in stored state and three expanded sheilds, two large boosters, a rifle handle, and two gripping hands. Whew! It's posable after assembly, and comes with foil stickers for markings; instructions are illustrated. Don't miss out on this ferocious beast!
$53.90$45.90
PREMIUM BANDAI HG 1/144 ZAKU IIFZ TYPE-B (UNICORN VER.)
From “MOBILE SUIT GUNDAM UC (Unicorn)”, Zaku II Fz Type-B, a participant in the assault on Torrington Base, is released in the HGUC series! Identifiable by its characteristic Fritz Helm and color scheme from its appearance in "Mobile Suit Gundam UC," the Zaku II IIFZ Type- B has been thoroughly designed. The most notable feature of this model kit is the inclusion of a freshly modeled Zaku Bazooka, an iconic weapon that played an important role in the series' portrayed Torrington base attack. Order it now!
$25.90$21.90
