Gundam (Franchise)

The Sazabi now joins the SD Gundam EX model-kit lineup from Bandai! He's highly posable after assembly with his 3mm joints, and he's armed with his beam hot rifle, beam tomahawk and shield. Display together with the SD Gundam EX Nu Gundam to recreate Char's legendary battle with Amuro. Order yours now!

Read more less

Until now there have been several Master Grade RX-0 Unicorn Gundam but there hasn't been an MG Banshee. Well, now everything changes with Bandai's new Master Grade RX-0 Unicorn Banshee! While it shares some design and engineering with the previous MG Unicorns it comes into its own with those enormous weapons mounted on the arms as well as new armor parts for the legs and even more psycho frame parts! Get yours now!

Read more less

Close support version of the MS-07B. Includes sword and that awesome gattling gun/shield assembly. (Can someone explain how it stays standing, firing that thing?) Figure of Pilot Norris Packard is included. Get yours now!

Read more less

The HGBF Build Strike Gundam Full Package is a highly detailed and articulated model, molded in multiple colors. Build to fight! 

Read more less

The RX-178 Gundam Mk-II Titans version from “Mobile Suit Zeta Gundam" is back in the High Grade line sporting new proportions for a sleeker look with improved posability! Includes the Vulcan Pod System, Beam Rifle, Hyper Bazooka, two Beam Sabers, and a shield. Don't miss this new and improved version of the classic Mk-II! Parts come molded in multiple colors.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

The RX-77-2 Guncannon from "Mobile Suit Gundam" is back in the High Grade line sporting new proportions for a sleeker look with improved posability! Includes parts for his 240mm cannon set, beam rifle, and a pair of open hands and closed hands. Don't miss this new and improved version of the classic Guncannon!  

Read more less

HGUC kit number 200 turns out to be Mobile Suit Type 100, the Hyakushiki. This could be considered the Revive Hyakushiki as Bandai has engineered this new Hyakushiki using the designs from other kits in the revive series. Hyakushiki comes with three different stickers for the eyes so you can choose your look as well as two Beam Sabers, a Beam Rifle, and the Clay Bazooka. All of which mount on the back of the MS when its not using them.    

Read more less

The RX-78-2 Gundam is now available in the Entry Grade series! The Entry Grade line is as beginner-friendly as always and is a great, fun build for experienced Gunpla builders. It uses a small number of parts despite having elaborate details and movement. The beam rifle and shield are included! Order today!

Read more less

The newest Perfect Grade kit is none other than the Strike Freedom Gundam! The Strike Freedom, with its expandable Super Dragoons, is the largest PG kit ever released. Completely new molds were used in the production of this kit and Bandai has outdone themselves when it comes to engineering something made of so many small (and not so small) parts, particularly in the joints and armor where the gold frame parts are viewable. Bandai has designed new, sturdier joints to hold this hefty kit once it is completed, and it includes weapons and accessories such as the Beam Shield, two Beam Rifles, two Railguns, eight Super Dragoons, a display base, and an LED unit for the head! Plus Katoki Hajime's notorious plethora of markings! Are you game?

Read more less

Designed by master mecha designer Hajime Katoki, Bandai's Master Grade ZZ Gundam Ver. Ka is fully transformable into the G-Fortress! The robot's torso forms the Core Block,which transforms into the Core Fighter; it can also combine with the Double Beam Rifle, Core Top (the Gundam's upper body) and Core Base (the lower body) to form the full G-Fortress. The forehead contains the powerful Hi-Mega Cannon. More mechanical detail has been added inside the gaps that open during transformation or posing, the knee joints have been improved with a sliding mechanism, and it also comes with its sizable backpack! In addition to the Double Beam Rifle, it's armed with two Beam Sabers and more. You won't want to miss out on this historic kit, so order it today!As a special bonus, this kit will also include a sheet of Premium Decals unique to the MG ZZ Gundam Ver.Ka for an even more intense and detailed look! These decals are only available with purchase of this kit, and are not available with the normal version.

Read more less

The incredibly fast Gundam F91 appears in a modern high-grade kit! Part of the All Gundam project which seeks to bring new modern kits from older Gundam titles, the F91 shares a common construction with other kits to allow for part swapping and easy customization. Alternate face and deployed shoulder fin parts can be easily part swapped out for display! Weapons include beam rifle, beam shield, beam sabers, beam launcher and movable VSBRS! Numbering for "F91" is engraved on shoulders.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Full Price Preorder: $229.90 This item is currently pre-order only, ETA is December 2024-January 2025. If you have any queries, do contact us via Whatsapp to enquire, thank you! Preorder Information: Any other items placed in the same order as preorder items will only be delivered after all items in the order arrive. Preorder items are NOT ELIGIBLE for any discounts. Preorders may be subjected to manufacturing and shipping delays, which are not within our control. We will still try our best to fulfill your order ASAP. Full refund will be issued if your order is not allocated. There will be no refund for cancellations. ---------------------------- From the popular Mobile Suit Gundam SEED Destiny anime series comes the BN Head Collection Strike Freedom Gundam Head Sculpt by Bandai! This highly detailed head sculpt features the many memorable details of the iconic Strike Freedom Gundam. Standing over 20 inches tall the Gundam head features LED light up eyes that will enhance any display the head sculpt is featured in. Make sure to add this impressive head to your Mobile Suit Gundam collection!

Read more less

A Master Grade version of Sandrock from Wing Gundam has been on many fans' want list for a long time now. Now Bandai answers those pleas with their MG Sandrock Endless Waltz version! Like the other MG Wing kits released in 2011 (linked below), Sandrock comes with his signature weapons, in Sandrock's case the Heat Shotel, which utilizes effect parts and can be used in a variety of ways attaching to different sections of the kit. As well, plenty of markings stickers are provided for that Ver Ka. look. Don't miss him!

Read more less