Gundam (Franchise)

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

The RG series with its one and only separated color replication as its characteristic, faithfully recreated the Deactive image color by molded colors. Realistic decals are included, helping to make the model as close to the original as possible. Weapons included: Beam Rifle, Beam Saber, Beam Boomerang, Beam Sword, Long-range Beam Cannon, Shield, Beam Shield.

Read more less

Relegated to use as a generator after 3 centuries of neglect, the Gundam Barbatos was pressed into service during an attack by the enemy Gjallarhorn in "Mobile Suit Gundam: Iron-Blooded Orphans"! This HG version can swap weapons and armor parts with other kits in the series, and contains parts to build one of two different versions of the mech. Parts molded in dark gray, white, dark blue, yellow and red; foil stickers are included for the markings. Order yours today!

Read more less

Bandai's Perfect Grade Strike Gundam has been renewed to the very latest format! Features new modeling added to various armor parts, including the head; the internal frame is now gunmetal in color, and the plated parts are chrome -- other armor parts are also issued in a different, more intense finish to give the assembled kit a fantastic impression! Yellow LED parts are also included. Order yours now! [Includes]: LED parts (yellow) Strike armor parts  Aile striker pack Sword striker pack Launcher striker pack Tetron seals

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

The prototype Gundam from which the 5 other Gundams were developed in Gundam Wing, makes a new appearance as interpreted by Hajime Katoki for the endless Waltz manga. Following the same styling as the other Ver EW designs, Wing Gundam Proto Zero Has been reproduced with new proportions and utilizes a modified XXX-G frame for construction and can transform into Neo bird mode. Iconic weapons including twin Buster rifle, shield with extending nose gimmick, shoulder mounted machine cannons and beam sabers are included. New features include foldable canards on shield and redesigned thruster wings that can unfold further outward. Display stand with standing and sitting versions of hero Heero Yuy are included. Order this spectacular version of the Wing Gundam today!

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

It's been a number of years since we saw a new MG 2.0 kit released and now Bandai's chosen an amazing suit to bring it to us again: the fan favorite Hyakushiki! This kit's armour will be mekki-plated with undergates so no gate marks are visible after assembly.  It will come with various eye parts so you can choose how you want the face to look, and the binders on its back will be attached via a flexible joint to allow a lot of movement.   This golden beauty will come with a Bazooka, Beam Rifle, two beam sabers, and marking stickers. Get yours today!

Read more less

The Dilanza piloted by Guell Jetterk in "Mobile Suit Gundam: The Witch of Mercury" gets a new HG model kit from Bandai! Its movable axis means it can get into tons of bold action poses after assembly; the neck block that connects the head and torso is equipped with a double ball joint for superior flexibility. The shoulder shield is also highly posable, and various parts of the fuselage have built-in gimmicks for profound action. The Dilanza's characteristic antenna and feather decoration has also been reproduced; the backpack can be attached and removed as you like. Rifles and torches can be stored behind the shield, and the beam partisan, beam torch and beam rifle are included. Order yours now! [Includes]: Beam partisan Beam torch Beam rifle Stickers

Read more less

From "Mobile Suit Gundam Wing" comes High Grade After Colony Wing Gundam! This is a highly detailed and articulated model kit molded in multiple colors. Order this Gundam for your own collection today!

Read more less

Bandai's "Mobility Joint Gundam" lineup is a series of plastic action model kits with various interchangeable parts and stickers! Strike Gundam and Strike Rouge from "Mobile Suit Gundam Seed," Gundam Caliburn from "Mobile Suit Gundam: The Witch from Mercury," and G-3 Gundam from "Mobile Suit Gundan MSV" are partly new models! Strike Gundam can be enhanced and expanded to Perfect Strike Gundam by adding the EX parts, too! There are eight different items to collect and trade, randomly packed in boxes of ten; each comes with a piece of soda-flavored gum. Order yours today! [Figure Size]: Approximately 7cm x 5cm [Materials]: ABS [Lineup]: Strike Gundam Strike Rouge Gundam Caliburn G-3 Gundam EX parts for Strike Gundam EX parts for Strike Rouge EX parts for Gundam Caliburn EX parts for G-3 Gundam

Read more less

To celebrate 40 years of Gunpla, Bandai brings us a kit from "Gundam 0079" of a HG RX-78-2 Gundam, Beyond Global! The articulation in this redesigned First Gundam features the ability to create incredibly natural-looking poses; both the design and the articulation labeling it as the new Beyond Global edition. It included movement alike to bending, including independent articulation at the wrist joints for shield posing. Order this incredibly detailed and articulated HG RX-78-2 Gundam Gunpla today!

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

What could be better than a new Gundam model kit? A new Gundam model kit that comes with snacks! Heart fulfills our fondest wish by bringing us this special gift of a limited-color, easy to assemble SD-style Gunpla of the Gundam Aerial from "Mobile Suit Gundam: The Witch from Mercury" packed with a 20-gram bag of delicious treats! It's a wonderful gift for someone special -- or even for yourself! Order yours today!

Read more less

The High Grade Build Fighter Build Burning Gundam is here to shake things up! This kit features the option to switch Build Burning Gundam into normal mode or fight mode style, depending on which color of included translucent plastic parts (blue or orange) you choose to equip! Four types of hands are included for striking various attack poses, and the assortment of burning battle effect parts add that perfect finishing touch for action scenes. Build to fight! 

Read more less

Piloted by Banagher Links, the PG Unicorn is the first Perfect Grade Bandai kit in four years, and the most impressive to date. A spectacular separate LED kit can be purchased to bring Unicorn to life in light on display! Fans can expect an array of extraordinary features from this kit -- A perfect reproduction of the transformation from Unicorn mode to Destroy mode (face guard expansion included) The full-body red Psychoframe employs special transluscent plastic for the 30-piece LED kit (sold separately) to shine through The blade antenna, which can be expanded or collapsed for transformation, utilizes a magnet to display a beautiful, single horn in Unicorn mode, and the inner parts of the horn expose colored gold in Destroy mode Elbows and knees are made to achieve the utmost range of movement without detracting from the appearance of their exteriors Armament units around the knees are moveable in every mode

Read more less