Gundam (Franchise)
FLAMING SNOW MG-123 | 1/100 GUNDAM EXIA (RECIRCULATION NEON PURPLE) FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HG 1/144 ASTRAY GOLD FRAME AMATSU MINA
The HG Astray Gold Frame Amatsu Mina is a highly detailed and articulated model kit molded in multiple colors with stickers for the markings. Get yours now!
$31.90$26.90
FLAMING SNOW MG-14 | 1/100 GUNDAM ASTRAY RED FRAME FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
BANDAI SD GUNDAM EX STANDARD UNICORN GUNDAM BANSHEE NORN
Bandai's SD Gundam EX Standard lineup features stylish proportions and newly designed joints for improved posability, as well as parts and weaponry that can be swapped with HG kits! Each comes with foil stickers for the markings Get yours now!
$11.90$9.90
BANDAI SD GUNDAM EX STANDARD NU GUNDAM
The Nu Gundam now joins the SD Gundam EX model-kit lineup from Bandai! He's highly posable after assembly with his 3mm joints, and he's armed with his beam rifle, beam saber and shield. Display together with the SD Gundam EX Sazabi to recreate Amuro's legendary battle with Char Aznable Order yours now!
$11.90$9.90
BANDAI RG 1/144 RX-78-2 GUNDAM
With the ever-popular RX-78-2, Bandai launches its newest brand: RG. RG stands for "Real Grade," and with this line Bandai loads an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The new frame is "stress free" and features Advanced MS Joints, and stands 12.5 centimeters tall when assembled. Those wishing to tackle this awesome example of Bandai engineering will need a good hobby knife, as many of the small pieces need to be trimmed perfectly in order for them to assemble correctly. Real Sticker Decals are included. And they're fantastic! Stand not included.
$41.90$36.90
BANDAI HG 1/144 RAIDER GUNDAM (REMASTER)
Celebrating the 10th anniversary of Gundam Seed (and the re-release of the anime on Blu-ray) Bandai has released their 'remastered' versions of their great HG kits from years gone by. Raider Gundam is identical to the initial release but now comes in colors matching the Blu-ray anime, marking stickers, and an extra part that lets you attach Raider Gundam to an action base 2 (sold separately).
$25.90$21.90
FLAMING SNOW RG-21 | 1/144 FREEDOM GUNDAM VER. GCP FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-04 | 1/144 FREEDOM GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-10 | 1/100 JUSTICE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
FLAMING SNOW MG-60 | 1/100 INFINITE JUSTICE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
FLAMING SNOW MG-90 | 1/100 AEGIS FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI RG 1/144 UNICORN GUNDAM
In the fall of 2017, a 1/1 scale RX-0 Unicorn Gundam will be installed at the Diver City Tokyo Plaza shopping center, and to commemorate the event, Bandai is bringing out this amazingly detailed RG Unicorn Gundam! It features an advanced inner framework, and it can transform between Unicorn mode and Destroy mode. It's armed with a Beam Magnum, a Hyper Bazooka, a shield and two beam sabers. Don't wait on this one, order it today!
$63.90$55.90
BANDAI EG 1/144 RX-78-lā-III LAH GUNDAM
Ra Gundam from the upcoming "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse" joins the "Entry Grade" model kit lineup from Bandai! The parts are cast in color, and the patterns at its shoulders and waist can be made simply by assembling the model; it's made to be fully posable while reducing the number of parts. The parts can be easily removed from the gates without using nippers, too! Order this amazing new Gundam for your own collection today!
$17.90$14.90
BANDAI FM 1/100 FORBIDDEN GUNDAM
The Forbidden Gundam from "Mobile Suit Gundam SEED" joins the "FULL MECHANICS" model-kit lineup from Bandai! This kit achieves both high-density detail and ease of assembly; it's loaded with dense mechanical modeling, from the inside of the exhaust port to the mold behind the armor. The place parts of the Jufunshuren "Nidhoggr" have two types of surface finish to express the difference in texture; the energy cable connected to the backpack is reproduced with the attached varnish tube. The "Geschmeidig Panzer" energy deflection armor has a flexible arm and a shield. Multiple axes of movement are provided at the connecting part of the backpack so the angle of movement can be adjusted. The collar is movable in conjunction with the rotate of the chest intake block. With a structure in which the head sinks according to the movement, the backpack moves without interfering, and transforms into a high-speed assault form with minimal motion. In addition to deploying the 88mm railgun "Eckzahn," it's also possible to rotate the local generator that changes the trajectory of Fresberg. Order it for your own collection today!
$97.90$83.90
BANDAI MG 1/100 PROVIDENCE GUNDAM (CROSS CONTRAST COLOR)
Bandai China has released a new line of Cross Contrast Colors model kits based on the popular Mobile Suit Gundam SEED series. These distinctive models are differentiated by their distinct color treatments, which are paired with clear sections to create a dramatic and bright appearance. The MG 1/100 Providence Gundam (Cross Contrast Colors) Clear Red is a striking model kit with a vibrant color scheme. This special variant of the Providence Gundam has mostly red armor, with clear and solid components for a unique visual impression.
$219.90$188.90
FLAMING SNOW HG-85 | 1/144 DESTROY GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$8.90$7.90
BANDAI MS MECHANICAL BUST 03 GUNDAM AERIAL (FULL SET OF 3)
MS Mechanical Bust is a display model of Mobile Suits from the bust up that have been sculpted meticulously. By combining the lineup of products of the exterior and interior mecha, you can enjoy the detailed molding and construction. Also, by adding the Luminous Unit packaged with the interior mecha, you can recreate the flashing lights of the MS. [Lineup] Gundam Aerial Exterior (Color Ver.) Gundam Aerial Exterior (Mechanical Clear) Interior Mecha (with Luminous Unit) *A Luminous Unit included with the interior mecha is required to achieve light-up effects.
$26.90$22.90
FLAMING SNOW PG-04 | 1/60 UNICORN GUNDAM BANSHEE NORN FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HG 1/144 GUNDAM ASTRAY BLUE FRAME SECOND L
The High Grade Gundam SEED (HG SEED) MBF-P03 Gundam Astray Blue Frame 2nd L is a 1/144 scale kit released in 2013. It is a detailed snapfit kit molded in multiple colors. Get yours now!
$28.90$24.90
FLAMING SNOW PG-03 | 1/60 UNICORN GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI MG 1/100 HIGH MOBILITY TYPE PSYCHO ZAKU VER. KA (GUNDAM THUNDERBOLT VER.)
The High Mobility Type Zaku Pyscho Zaku gets Hajime Katoki's loving touch in this amazing kit! The cockpit hatch can be opened, and it's armed with the Beam Bazooka, three Giant Bazooka, two Zaku Machine Guns, two Heat Hawks, and three Sturm Fausts, and more! Don't miss out!
$147.90$129.90
BANDAI BN FIGURE LACUS CLYNE & HARO
From the fan favorite series "Mobile Suit Gundam SEED" comes an exclusive figure of Lacus Clyne and Haro! This figure is a special project by Bandai Namco Shanghai, featuring Lacus in Hanfu! Be sure to add her to your collection!
$69.90$59.90
FLAMING SNOW HG-69 | 1/144 FULL ARMOR GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90