Gundam (Franchise)
BANDAI HG 1/144 ABYSS GUNDAM
The HG Abyss Gundam is impressive, it's transformable, and it requires no paint or glue! It is beautifully-molded in 1/144 scale, using Bandai's patented multi-gate technology, which allows multiple colours to be molded on a single runner (including clear colours!). Poly-caps allow smooth joint movement and transforming action; and of course foil stickers are included to add detail where the machines can't Parts for a display stand are also included, to allow you to show off the Mobile Armour! Order it now!
$39.90$33.90
BANDAI RG 1/144 JUSTICE GUNDAM
Bandai's Real Grade Justice Gundam keeps the excellence of the series going with an amazingly detailed kit complete with opening hatches, effect parts, and so many markings. Justice Gundam can also be mounted onto his backpack securely thanks to Bandai's great design for the feet.
$41.90$36.90
FLAMING SNOW MG-41 | 1/100 NU GUNDAM VER. KA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-11 | 1/100 PROVIDENCE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HG 1/144 FORBIDDEN GUNDAM (REMASTER)
Celebrating the 10 anniversary of Gundam Seed (and the rerelease of the anime on Blu-ray) Bandai has released their 'remastered' versions of their great HG kits from years gone by. Forbidden Gundam is identical to the initial release but now comes in colors matching the Blu-ray anime, marking stickers, and an extra part that lets you attach Forbidden Gundam to an action base 2 (sold separately).
$25.90$21.90
BANDAI MG 1/100 α FORCE IMPULSE GUNDAM
The ZAFT Mobile Suit that destroyed Kira Yamato's Freedom Gundam in "Gundam Seed Destiny" now gets a Master Grade kit release! Sharply molded in color, the transformable Impulse Gundam is formed by three main parts: Chest Flyer, Core Splendor, and Leg Flyer. Core Splendor's cockpit can be opened to insert an in-scale sitting pilot figure. In addition, landing gear are provided for both the Chest Flyer and Leg Flyer as an original gimmick that's never seen in the anime! The Force Silhouette pack carried by the Silhouette Flyer can be attached to the back of the Mobile Suit to complete Force Impulse Gundam. Weapons include an anti-ship laser sword, a beam rifle, an openable shield, and two beam sabers. Unpainted 1/100-scale figures of Shinn Asuka and Lunamaria Hawke (both molded in white) are packed in the set along with foil stickers, dry-transfer decals, and marking stickers to add detail to the completed model.
$73.90$64.90
FLAMING SNOW RG-50 | 1/144 GUNDAM ASTRAY RED FRAME FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI RG 1/144 AILE STRIKE GUNDAM
The third kit in the Real Grade line is the GAT-X105 Aile Strike Gundam. Bandai gives the Strike some REAL attention! It comes with a shield, beam rifle, two beam sabers, plenty of marking stickers, and an adaptor so it can fit on an Action Base 1, and most importantly off all, that amazingly engineered Advanced MS Joint frame!
$41.90$36.90
BANDAI HG 1/144 SWORD IMPULSE GUNDAM
Fantastic high-grade injection plastic kit of the Sword Impulse Gundam will be great fun to build up. Parts molded all in colour mean you don't need to paint it; and all the parts snap neatly together, so no glue is required, either. Stickers for detail are included; and polycaps at the joints mean the finished model will be poseable. The completed model can also transform, separating the Core Splendor, Leg Flyer, and other parts.
$26.90$22.90
BANDAI HG 1/144 BLITZ GUNDAM
To coincide with the 10th anniversary of Gundam Seed Bandai has rereleased this hugely popular HG kit of the Blitz Gundam in a 'remastered' color reflecting those seen on the upcoming Blu-ray release. A stand attachment and marking stickers are also included in this special release.
$23.90$19.90
BANDAI HG 1/144 DUEL GUNDAM ASSAULT SHROUD
To coincide with the 10th anniversary of Gundam Seed Bandai has rereleased this hugely popular HG kit of the Duel Gundam Assault Shroud in a 'remastered' color reflecting those seen on the upcoming Blu-ray release. A stand attachment and marking stickers are also included in this special release.
$23.90$19.90
BANDAI HGCE 1/144 WINDAM
From "Mobile Suit Gundam Seed Destiny" comes an HG kit of the main mass-produced mobile suit used by the Earth Alliance, the Windam! The kit makes use of Bandai's new "FINE BUILD" technology for a solid joint structure. Each part of the Jet Striker is movable for plenty of posing options, and it can be linked with various striker packs that utilize the same "Striker Pack System". Grab it for your collection today!
$27.90$23.90
BANDAI HG 1/144 MD-0064 DARILBALDE
The red-armored Darilbalde from "Mobile Suit Gundam: The Witch of Mercury" now joins the HG model kit series from Bandai! The brilliance of the shell unit is expressed with clear parts and stickers; beam parts can be attached to the hands by changing the tips from the elbows of both arms. The beam javelins are separated at the center, and can be used as individual weapons. In addition, the effect parts on both ends can be attached and detached. Lots of optional parts, such as a base for display, are included too. Order yours now!
$32.90$28.90
FLAMING SNOW RG-01 | 1/144 RX-78-2 GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-45 | 1/144 GOD GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
KOSMOS LED UNIT FOR HG GUNDAM CALIBARN/AERIAL REBUILD (TYPE B)
Beautify your display setup with this effect accessory set, specially crafted for High Grade Gundam Calibarn and Gundam Aerial Rebuild by KOSMOS! Suitable for: High Grade Gundam Calibarn (LED Gund-Bits Permet Belt) - HG Type B High Grade Gundam Aerial Rebuild (LED Gund-Bits Permet Belt) - HG Type B Features: Customizable LED for Gund-Bits Permet Belt Adjustable lighting colors effects (Require KOSMOS app) Perfect & easy fit Model kit and display stands are not included.
$29.90$25.90
BANDAI MG 1/100 GUNDAM ASTRAY TURN RED
A variant of the Gundam Astray Red Frame featured in the side story "Gundam Seed VS Astray" appears in MG form! Its characteristic red and white inverted colors along with giant V-Fin, chin guard, and original backpack have been faithfully recreated! Gundam Astray Turn Red features 2 Tactical Arms packs that can convert between massive buster sword and stationary chain gun. A small display base is provided to help balance the weight of the Tactical Arms. Hip mounted Armor Schneiders beam rifle, and shield round off its arsenal. Beam rifle and shield parts can be retrofitted on the MG Astray Red Frame to show its original form! Get one for yourself now!
$126.90$108.90
BANDAI HG 1/144 STRIKE ROUGE + IWSP
Cagalli's Strike Rouge with the IWSP comes to us in a High Grade "Mobile Suits Variation" design! Molded all in colour and with snap-fit assembly, it's also jointed with lots of polycaps so you can have it built and posed on your desk in no time! Stickers, including Cagalli's personal mark, are included for details. Get yours today!
$26.90$22.90
BANDAI MG 1/100 AEGIS GUNDAM
Another great SEED Master Grade kit from Bandai, with a twist. Well, actually several twists.. and turns.. as you transform the Aegis Gundam into its Mobile Armor form. That's right, the MG Aegis transforms! No part swapping is used in the transformation which is a tribute to the amazing design and engineering from Bandai. Stand not included.
$81.90$69.90
FLAMING SNOW RG-32 | 1/144 NU GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HGUC 1/144 UNICORN GUNDAM 02 BANSHEE NORN (DESTROY MODE)
The spectacular Banshee Norn Destroy Mode from "Gundam Unicorn" is molded in color, is posable after assembly, and features some clear parts and stickers for detail. Order yours now!
$33.90$29.90
BANDAI HG 1/144 RAIDER GUNDAM (REMASTER)
Celebrating the 10th anniversary of Gundam Seed (and the re-release of the anime on Blu-ray) Bandai has released their 'remastered' versions of their great HG kits from years gone by. Raider Gundam is identical to the initial release but now comes in colors matching the Blu-ray anime, marking stickers, and an extra part that lets you attach Raider Gundam to an action base 2 (sold separately).
$25.90$21.90
BANDAI HG 1/144 GUNNER ZAKU WARRIOR
Very sharp, high-grade injection-plastic kit of the Gunner Zaku Warrior. Molded all in colour and with snap-fit assembly, so no glue or paint are required. Foil stickers are included for extra detail. Includes, of course, plenty of weaponry: MMI-M633 Beam Assault Rifle; Hand Grenades; Shield; Beam Tomahawk; and the "Gunner Wizard" pack with high-energy beam gun thingy that it carries around. Naturally polycaps are included for the joints, so you can pose it however you like! Cables for the Gunner Wizard are included. Order it now!
$22.90$19.90
BANDAI NG 1/100 SAVIOUR GUNDAM
Prepare the path, for the Saviour cometh... Saviour Gundam, that is! Excellent kit of Saviour Gundam as piloted by Athrun Zala in "Gundam Seed Destiny." It comes with all its trademark weaponry, and it's also fully transformable into mobile armor mode. Get yours now!
$73.90$62.90
