Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Gunpla-kun is here in color! Gunpla-kun is made of LIMEX -- a new material that combines environmental consideration with the fun of plastic model kits!
LIMEX ia a new eco-friendly material that contains more than 50 percent limestone as the main raw material, greatly reducing the use of conventional petroleum-derived plastics. This is the first time in history that LIMEX has been molded in full color!
You can build Gunpla-kun into a full figure as shown here, or you can assemble him partially with some of the parts still on the runners and display him that way! He comes with his familiar armaments, such as the beam rifle, beam saber and shield.
Order him today!
[Includes]:
Runner parts
Stickers
Beam saber
Beam rifle
Shield
Base for display
From "Gundam Build Fighters," here's the impressive blue-winged Star Build Strike Gundam Plavsky Wing!
This highly detailed and articulated snapfit kit is molded in multiple colors with stickers for the markings.
A perfect addition to any Gundam lineup!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Shin Burning Gundam from the upcoming "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse" gets a new High Grade (HG) model kit from Bandai!
It comes with various effect parts, including cloak effects based on the Master Gundam. A polarized resin has been used for the clear parts, giving them a unique color-changing effect when viewed from different angles. This mighty mech comes with its sword, scabbard, and three sets of interchangeable hands.
Order it for your own collection today!
The Gundam 00 Diver Arc from the upcoming "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse" gets a new High Grade (HG) model kit from Bandai!
The effect parts in this kit are made with a special resin that absorbs light and emits it for a luminescent look! The GN drive is equipped with a telescopic gimmick that's newly molded, and 3D metallic seals are used to produce a highly glossy three-dimensional effect. Detachable and deformable gimmicks for the shoulder parts are included too.
Order it for your own collection today!
More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot!
From the "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses.
Weapons include three beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword. A display stand is included to assist with mid-air poses. Sharply molded in color, this snap-fit assembly kit does not require any cement or paint to complete (of course, the use of paint will improve the appearance of a finished model). Stickers and dry transfers are included for markings.
Sharp!
Celebrating the 10 anniversary of Gundam Seed (and the rerelease of the anime on Blu-ray) Bandai has released their 'remastered' versions of their great HG kits from years gone by.
Forbidden Gundam is identical to the initial release but now comes in colors matching the Blu-ray anime, marking stickers, and an extra part that lets you attach Forbidden Gundam to an action base 2 (sold separately).
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai's SD Gundam EX Standard lineup features stylish proportions and newly designed joints for improved posability, as well as parts and weaponry that can be swapped with HG kits! Each comes with foil stickers for the markings.
Shin Asuka's Force Impulse Gundam, seen in the first half of "Mobile Suit Gundam Seed Destiny," gets a new Real Grade kit from Bandai!
It features an internal body frame that can be separated from the runners already assembled, meaning much less work for you to do, and amazingly precise details as well! It's molded in color for a screen-accurate appearance.
The Force Silhouette's gimmicks, texture and details are carefully reproduced, complete with the wings that fold backwards. The forearm can twist on a separate axis from the elbow for a realistic range of motion, and the shoulder armor rotates independently, reducing part interference. The knee armor is also movable in conjunction with the motion of the leg; four pairs of hands are included, as are plenty of weapons.
Place your order today and add this legendary Gundam to your lineup!
[Includes]:
High energy beam rifle
Mobile shield
Vajra beam saber (x2)
Folding razor vs. armored knife (x2)
Silhouette Flyer
Interchangeable hands (x8--4 each left and right)
Realistic decals
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them!
Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
From "Gundam Build Fighters Try," it's the mighty Kamiki Burning Gundam!
It's molded in vivid red, white, black, dark blue, clear blue, yellow and clear orange plastic, so painting is not necessary (although painting will improve the appearance of just about any kit). Comes with flame effect parts, and three extra sets of hands; foil stickers are provided for the details.
Get yours now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The Sazabi now joins the SD Gundam EX model-kit lineup from Bandai!
He's highly posable after assembly with his 3mm joints, and he's armed with his beam hot rifle, beam tomahawk and shield. Display together with the SD Gundam EX Nu Gundam to recreate Char's legendary battle with Amuro.
Order yours now!
Bandai Brings us a new line of Super Deformed (SD) Gundam called the EX Standard!
These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them! Foil marking stickers are also included to add extra colors and markings to your kit.
A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
