Model Kits and Accessories
BANDAI HGAW 1/144 GUNDAM DOUBLE X
Highly detailed and articulated model molded in multiple colors, with stickers for markings. Get yours today!
$30.90$25.90
BANDAI HG 1/144 GUNCANNON (CUCURU DOAN'S ISLAND VER.)
The Guncannon from "Mobile Suit Gundam: Cucuru Doan's Island" is now an amazing HG model kit from Bandai! The high posability of the HG format means this Gundam can get into impressive poses, such as lying on the ground to shoot, or crouching down! The kit is molded in the distinctive coloring of Cucuruz Doan's Guncannon, and two different types of newly molded backpack parts are included to reproduce both the Kai and Hayato versions. Original marking stickers designed by Hajime Katoki are included, too! Order yours today! [Includes]: Interchangeable hands Backpack parts (Kai) Backpack parts (Hayato) Beam rifle Marking stickers
$39.90$33.90
BANDAI HG 1/144 HEINDREE STURM
The Heindree Sturm, a combat mobile suit made by Grassley Defense Systems in "Mobile Suit Gundam: The Witch from Mercury," is now a 1/144-scale HG model kit from Bandai! Ball joints at its neck and waist allow natural forward-and-backward tilting poses; it's equipped with a movable special weapon on its back. It also has a special shield on its left arm, which is equipped with a structure enabling it to be turned to the front. Order yours today! [Includes]: Beam rifle Beam saber Shield Stickers
$27.90$23.90
BANDAI HG 1/144 ZOWORT
From the latest in the Gundam series "Mobile Suit Gundam: The Witch from Mercury", Peil Technologies' mobile suit Zowort has been transformed in HG! Order it for your own collection today! Refitted parts aid with easy assembly and avoids pinching. The neck can be pulled out to expand the range of movement. Ball joint articulation in the waist supports forward and backward postures. Grip of the beam saber is stored in the forearm. Dedicated weapons with a characteristic form are included. Clear green beam parts are included for the beam saber. The state of boarding the flight system "HG 1/144 Ticbalan" (sold separately) has been reproduced. By combining with an action base (sold separately), you can create a wide variety of flying action poses. [Set Contents]: Beam saber x 2 Weapons x 2 Sticker x 1
$27.90$23.90
BANDAI HG 1/144 HEINDREE
The Heindree from "Mobile Suit Gundam: The Witch from Mercury" joins Bandai's "HG" model-kit lineup! It's designed for ease of assembly by using parts that are mainly post-fitted to avoid pinching; the ball joints on the neck and waist are designed with a space to accommodate forward- and backwards-tilted poses. In addition to its characteristic massive form, it's equipped with a special weapon that's as tall as it is, and can be rotated too. Its shield is mounted to its left arm; the arm can be moved so the shield is held in front. Its backpack is equipped for three nozzles for high mobility, too. Order yours now! [Includes]: Dedicated shield Dedicated weapon Stickers
$27.90$23.90
BANDAI HGFC 1/144 GOD GUNDAM
The GF13-017NJII G Gundam in 1/144 scale has arrived! Yes, the Neo Japan Mobile fighter was previously available as a Master Grade kit but Bandai has outdone themselves again with this HG release. The 1/144th version features a detachable Corelander and extra hands (4 sets!), including hypermode hands! The transformation to Hyper Mode is quick and easy thanks to the great design and use of polycaps. The G boasts Beam Swords, and Machine Cannons mounted in the torso, and God finger protectors on the arms. Marking stickers are also included. Order this mighty Gundam today!
$30.90$26.90
FLAMING SNOW RG-09 | 1/144 00 GUNDAM SEVEN SWORD/G INSPECTION FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-73 | 1/100 WING GUNDAM EW VER. KA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-98 | 1/100 GUNDAM DOUBLE X FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW MG-105 | 1/100 GINN FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
FLAMING SNOW MG-69 | 1/100 CROSSBONE GUNDAM X-1 FULL CLOTH FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
PREMIUM BANDAI MG 1/100 NEMO UNICORN (DESERT COLOR VER.)
The Nemo Unicorn is now available in the 1/100 scale! This variation with Desert Color makes it a unique piece for your collection, get yours today!
$47.90$41.90
PREMIUM BANDAI MG 1/100 GM CANNON (NORTH AMERICAN FRONT)
The Master Grade (MG) RGC-80 GM Cannon (North American Front) is a 1/100 scale kit released in 2015, as a Bandai Hobby Online Shop exclusive. Add it to your collection today!
$62.90$54.90
BANDAI MG 1/100 CHAR'S Z'GOK
The Master Grade version of Char's customised shiny red Z'Gok is here! The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series. The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. All in all, a superb kit of an incredibly cool machine!
$49.90$43.90
BANDAI MG 1/100 00 RAISER
One of the more popular suits in the Gundam universe, the 00 Raiser is now a Master Grade! This kit comes with its GN drives, which will be able to house an LED (one LED will be included with the kit, but another 4 will be needed to light up everything; 1 for the head, 2 for the GN Drives and 2 more for the Raiser). With the 00 Gundam and the 0 Raiser, it's like two kits in one box! All the weapons that make the 00 Raiser so intimidating, such as the GN Sword II and the GN Sword III are included, too! Stand not included.
$108.90$92.90
FLAMING SNOW HG-45 | 1/144 WING GUNDAM ZERO FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI HGUC 1/144 RX-93 NU GUNDAM
Nu Gundam is finally offered in Bandai's HGUC line, and what a superb kit this turned out to be! Sharply detailed and molded in color, this snap-fit kit of Amuro Ray's last piloted Mobile Suit in "Char's Counterattack" features polycap-jointed articulation and is fully equipped with two types of beam sabers, a beam rifle, a new hyper bazooka, and of course, its distinctive fin funnels that are detachable from its back and can be set in firing mode. Stickers are provided to add detail to the completed model.
$41.90$36.90
BANDAI HG 1/144 TICKBALANG
From the latest in the Gundam series "Mobile Suit Gundam: The Witch from Mercury", Tickbalang, which can carry MS such as Zowort, has been transformed in HG! The footrest can be stored and deployed by sliding it. Combined with an action base (sold separately), it can be displayed while towing the MS. Can be combined with other "The Witch from Mercury" plastic model series including "HG 1/144 Zowort".
$22.90$19.90
BANDAI HG 1/144 GUNDAM AERIAL
Gundam Aerial from "Mobile Suit Gundam: The Witch of Mercury" joins Bandai's HG model-kit lineup! The shield can be separated into 11 parts, which can be connected to various parts of the Gundam; the shell unit is reproduced by combining molded parts, double-sided seals and clear parts, and it can be assembled in the light-emitting form and the non-light emitting form. The beam parts are molded in clear material; the double-sided stickers have a pattern printed on the adhesive surface, to express transparency and depth by sticking them to the inside of the transparent parts. Order this amazing new Gundam for your own collection today!
$25.90$21.90
BANDAI HGCE 1/144 DESTINY GUNDAM
This kit of Shinn Asuka's Destiny Gundam from "Gundam Seed" is an entirely new mold! It features its weapons and plenty of effect parts cast in clear material for a striking appearance (including for its Wings of Light), and will be highly posable upon completion. Parts are molded in color so painting isn't needed, and it snaps together too; foil stickers are included for the markings. Order it now!
$37.90$32.90
BANDAI HG 1/144 GUNDAM AERIAL REBUILD
The repaired version of the Gundam Aerial from "Mobile Suit Gundam: The Witch from Mercury" joins the HG model-kit lineup from Bandai! The shield can be separated into 11 bit staves which can connect to various parts of the Gundam; the shell unit is reproduced by combining in-mold parts, stickers and clear parts, and it can be built either in a lit-up or a non-lighted version. The beam parts are made with clear parts; the length of the barrel of the beam rifle, which is a new type of dedicated portable weapon, can be changed with parts replacement. Connect all the bit staves to the barrel to create the Gambit Rifle! Order this amazing new Gundam today!
$30.90$25.90
BANDAI HG 1/144 GELGOOG MENACE (LUNAMARIA HAWKE CUSTOM)
The Gelgoog Menace from "Mobile Suit Gundam Seed Freedom" is now a member of the HG model-kit lineup from Bandai! It's equipped with the "Seed Action System" internal structure that specializes in reproducing impressive action poses! The wings are movable, allowing the linear cannon and missile launcher to be held in front. The wide range of motion of the shoulders allows for smooth holding of the railgun with both hands. The Beam Naginata for close combat comes with a grip for storage, and can be mounted on the waist. A beam shield using polarization molding is included; you can recreate the shield's storage and deployment modes with parts replacement. Although this mecha is bulky, it's flexible enough to get into a natural kneeling pose. And since the parts are molded in color, you'll get a great-looking result just by assembling it. Order it for your own collection today!
$48.90$42.90
BANDAI SD GUNDAM EX STANDARD RISING FREEDOM GUNDAM
Rising Freedom Gundam from "Mobile Suit Gundam Seed Freedom" is now a member of the "SD Gundam Ex-Standard" model-kit lineup from Bandai! It can transform into its MA form by replacing some parts; it has a wide range of motion for bold action poses. Its beam rifle, beam saber, and shield are all included. Order it for your own collection today!
$11.90$9.90
BANDAI HG 1/144 GUNDAM LFRITH
Launched ahead of the latest work in the Gundam series, "Mobile Suit Gundam: The Witch from Mercury"! This mobile suit plays an active role in the prequel to the main story, "PROLOGUE", and makes an early appearance! Get yours today!
$29.90$25.90