This 1/144-scale Real Grade kit of Char's custom version of the fast and agile Z'gok features full posability thanks to its internal "skeleton."
Parts come molded in color, so no paint is required to complete this easy to build kit, but it can be used to add detail! Includes stickers for markings.
This crisp new Gundam Astray (blue frame) comes to us in a High Grade model, superbly molded in color and of course featuring snap-fit assembly for ease in building.
Nicely engineered, it's extremely poseable thanks to matching blue polycaps (instead of the standard grey!), and can even drop to one knee to use the included shoulder-mount bazooka!
Foil stickers for shiny bits and clear stickers for other markings are included as well, for added detail.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Celebrating the 40th anniversary of Gunpla, Bandai brings us a new lineup--the Gunpla Evolution Project! The first entry in this new series is the Zeta Gundam!
It features increased flexiblity for superior posability, and accurate proportions. Parts can be switched to transform it into the Wave Rider, too. In addition, it's armed with the Hyper Mega Launcher, a beam saber, and more.
Order yours today!
The Xi Gundam from "Mobile Suit Gundam: Hathaway's Flash" gets a new HGUC kit from Bandai! This over-26-meter-tall Mobile Suit is perfectly rendered in 1/144 scale, bringing a sense of density and volume while still reflecting even the finest details.
Extra hands are included, as are the beam saber, beam rifle, and shield. The shield can be attached by removing the hexagonal parts of the arm. The wing on the back, the blades on the sides of its legs, and the deployable Minovsky flight unit are all included as well. Transform it from MS form to flight form by moving the legs and larger parts!
Order yours today!
This new HG model kit of the Dilanza from "Mobile Suit Gundam: The Witch of Mercury" can be assembled as a general version, or as the special unit used by Character A with parts selection!
Shoulder parts and antenna for the general version are included, as are shoulder parts and antenna for Character A's ride; the huge axe weapon is included too. The range of movement is expanded by opening and closing the rear armor. The torch includes clear effect parts for a realistic look, and both the effect parts and the torch itself are removable. The torch can be stored behind the shoulder shield on both versions, too.
Order yours now!
Bandai's new Real Grade kit of the Wing Gundam from "Endless Waltz" is here!
Can be displayed in robot or fligh form. Molded in black, white, red, yellow, blue and clear green, it has decals and stickers for markings, plus detailed, heavily illustrated instructions.
Here comes CH-01 Blue Flame 蓝焰 by ZZA Model!
A very detailed model kit made with high quality materials, included in this kit is a diecast inner frame. The articulation with this kit is superb, enabling a wide range of poses!
Wait no more, get this amazing kit for yourself now!
Set includes:
Main body
Diecast inner frame
Backpack with Wings
Dual blades
Dual beam rifles
Display stand
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The RG series with its one and only separated color replication as its characteristic, faithfully recreated the Deactive image color by molded colors.
Realistic decals are included, helping to make the model as close to the original as possible.
Weapons included: Beam Rifle, Beam Saber, Beam Boomerang, Beam Sword, Long-range Beam Cannon, Shield, Beam Shield.
Bandai brings us a new line of Super Deformed (SD) Gundam called the EX Standard! These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them!
Foil marking stickers are also included to add extra colors and markings to your kit. A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
You absolutely do not want to get the Full Armor Unicorn Gundam in Destroy Mode angry at you!
It comes with enough armaments to outfit a small army: two hyper bazookas, the Beam Magnum, four Beam Sabers, two Beam Saber blades, two anti-ship missles, two grenade launchers, four six-part hand grenades, six Beam Gatling Guns, its shield in stored state and three expanded sheilds, two large boosters, a rifle handle, and two gripping hands. Whew!
It's posable after assembly, and comes with foil stickers for markings; instructions are illustrated.
Don't miss out on this ferocious beast!
The Dilanza piloted by Guell Jetterk in "Mobile Suit Gundam: The Witch of Mercury" gets a new HG model kit from Bandai!
Its movable axis means it can get into tons of bold action poses after assembly; the neck block that connects the head and torso is equipped with a double ball joint for superior flexibility. The shoulder shield is also highly posable, and various parts of the fuselage have built-in gimmicks for profound action.
The Dilanza's characteristic antenna and feather decoration has also been reproduced; the backpack can be attached and removed as you like. Rifles and torches can be stored behind the shield, and the beam partisan, beam torch and beam rifle are included.
Order yours now!
[Includes]:
Beam partisan
Beam torch
Beam rifle
Stickers
From "Mobile Suit Gundam Wing" comes High Grade After Colony Wing Gundam! This is a highly detailed and articulated model kit molded in multiple colors.
Order this Gundam for your own collection today!
The Gundam Amazing Barbatos Lupus, as seen in the "Gundam Build" 10th anniversary video "Gundam Build Metaverse," gets a new 1/144-scale HG (High Grade) model kit from Bandai!
The main body and booster can be separated or combined; the booster and mace can also be combined into a weapon. The mace can be mounted on the back; the claw, which can be separated from the booster and attached to the arm, is equipped with an unfolding and rotating gimmick.
A lead wire is used for the tail blade, and the grip of the mace can be expanded to reproduce its shooting mode. The gun barrel can be attached, detached, and rotated in 90-degree increments. A base for display is included.
Order this "amazing" version of the Barbatos Lupus for your own collection today!
[Includes]:
Mace
Lead wire
Display base
Stickers
From the 2nd season of "Gundam Build Divers Re:RISE" comes a new kit of the enemy mobile suit set to appear on the show!
This unit features Bandai's recently introduced "Core Docking Custom" system, meaning more customization options than ever. You can swap armor parts between this mobile suit and the Core Gundam (sold separately) to create your own unique build.
Order today!
