The toy includes the main figure of the Sileighty (RPS13). It is a 1/62 model of the real life vehicle.
It has working suspension and its doors can be opened.
Slowpoke is now part of Bandai's "Pokemon Plamo Collection Quick!!" lineup!
This model kit assembles quickly (ironically enough) and easily; stickers for four different types of eyes are included, and the parts remove from the gates super-easily so you don't need nippers!
You'll love having Slowpoke in your collection -- order yours today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
From "Digimon Adventure" comes the second plastic model kit in the Figure-rise Standard series based on the 'Digimon' anime, MetalGarurumon! Each articulated part can be moved extensively, allowing you to recreate various action poses from the show. His signature "beam wing" effect can also be replicated with a removable PET sheet that's included in the kit.
Order this beast made of bytes for your collection today!
Just when I thought Bandai couldn't do it better - they do! This new kit of the G Gundam features the new "Fighting Action" frame system!
This all new design is made from ABS plastic and screws together. The resulting frame is extremely strong and holds positions without the sagging that earlier poly-cap designs suffered from. Plus it is amazingly poseable - the box art shows the mech standing with its arms crossed. We built one here to try it and it is incredible. I actually had it balanced on one leg while doing a sweep kick pose.
The rest of the kit is typical Master-Grade quality. All parts are precolored and snap together. Dry transfers for markings. Includes a figure of the pilot - Domon Kasshu. Two sets of hands - one standard and one in clear yellow to replicate the look of the energy ball attack.
This amazing kit enables you to build the V2 Assault, the V2 Buster or the V2 Assault Buster Gundam!
Whatever you choose, it'll be armed to the teeth with the Mega Beam Rifle, Mega Beam Shield, Beam Rifle, V2 Core Fighter, Assault parts and Buster parts. Molded in white, dark gray, blue red, metallic yellow and yellow, with foil stickers for markings.
The Lfrith Thorn from "Mobile Suit Gundam: The Witch from Mercury" joins Bandai's "HG" model-kit series!
Its characteristic large backpack is included, as are its exclusive weapon and shield.
Order it for your own collection today!
The Lfrith Ur from "Mobile Suit Gundam: The Witch from Mercury" is now part of Bandai's "HG" model-kit series!
It comes with its characteristic large backpack, special weapons and beam saber.
Order it for your own collection today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Tomica Premium Unlimited No. 09 Wangan Midnight Devil Z (トミカプレミアム unlimited 09 湾岸ミッドナイト 悪魔のＺ) is a toy released within the Tomica Premium Unlimited subline of the Tomica Premium toyline.
The toy includes the main figure of the Wangan Midnight Devil Z.
The toy includes the main figure of the Nissan GT-R.
It is a 1/62 model of the real-life vehicle. It has working suspension and its doors can be opened.
From Bandai comes a "Mobile Suit Gundam: Hathaway's Flash" kit of a 1/144 scale HG Penelope!
The complicated structure of Penelope has been recreated in this kit, using not only highly detailed parts but also utilizing clear parts in addition to solid parts. The shape and volume of the shoulder armor and tail stabilizer are incredibly impressive and one can open and close said armor by changing the position of Penelope.
Every additional part can be attached to the armor. A display pedestal can be used to display Penelope in a variety of different poses and modes.
Gorgeous! Bandai's Perfect Grade line continues with Gundam Seed's "Strike Rouge," superbly molded in coloured plastic, with the same fantastic construction quality demonstrated in previous PG kits.
A whopping number of parts are included in the typically-large (and heavy!) box -- besides the Strike Rouge, there are parts included for the Skygrasper and Aile Striker! Metal-plated parts (in pink!) are included for the Strike Rouge's custom weapons. Screws, springs, fabulous Gundam Stickers and dry-transfer decals are included; two construction manuals (one for the Strike Rouge, one for the Skygrasper and Aile Striker) are included to walk you through the building of all three models.
An "instruction manual" is also included for those who like to paint their Gundam models (of course it doesn't need to be painted), and also for indicating precise locations of the markings.
First introduced in the "Mobile Suit Gundam: Char's Counterattack - Beltorchika's Children" novel, the Hi-Nu Gundam now gets the HGUC treatment from Bandai!
This snap-fit plastic kit features polycap-jointed articulation and comes with a Beam Rifle, Nu Hyper Bazooka, Beam Saber, and shield, plus two detachable Fin Funnels that can be set in firing mode.
Foil stickers and marking stickers are provided!
New in 2019, from Takara Tomy comes the next addition for your Tomica collection! A green Suzuki Jimny!
Ready for display or play right out of the box! Don't miss out on your chance to add this to your Tomica collection. Order today!
The toy includes the main figure of the Suzuki Jimny.
It is a 1/57 model of the real-life vehicle. It has working suspension.
Tomica Premium Unlimited No. 12 Initial D RX-7 (Keisuke Takahashi) (トミカプレミアム unlimited 12 頭文字Ｄ RX-7（高橋啓介）) is a toy released within the Tomica Premium Unlimited subline of the Tomica Premium toyline. It is primarily released in Japan.
The toy includes the main figure of the Initial D RX-7 (Keisuke Takahashi).
It is the 1st vehicle in this line to be assigned the number "12".
It is based on a vehicle from the racing manga and anime series, Initial D, driven by Keisuke Takahashi.
MF Ghost Toyota 86 GT (Kanata Katagiri) was released October 21, 2023. It replaced the Tomica Premium Unlimited No. 04 The Fast and the Furious Dodge Charger.
It is the 2nd vehicle in this line to be assigned the number "04".It is based on a vehicle from the racing manga and anime series, MF Ghost, driven by Kanata Katagiri.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Quantity: 6 pieces/packSize: 80 x 20mm
Perfect size for MADWORKS adhesive sanding paper
The extra bit of sand paper can be folded such that the grinding plate can reach into corners and tight area.
Outstanding durability and performance with high efficiency
