Everything (Excluding PO & Exclusives)

The HGBF Build Strike Gundam Full Package is a highly detailed and articulated model, molded in multiple colors. Build to fight! 

Read more less

The RX-178 Gundam Mk-II Titans version from “Mobile Suit Zeta Gundam" is back in the High Grade line sporting new proportions for a sleeker look with improved posability! Includes the Vulcan Pod System, Beam Rifle, Hyper Bazooka, two Beam Sabers, and a shield. Don't miss this new and improved version of the classic Mk-II! Parts come molded in multiple colors.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Motor Nuclear - Legend of the Star General Model Assembly Kit MNP-XH04;Here comes Nezha 哪吒 from the Motor Nuclear, Legend of Star General series! Get yours today!

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.

Read more less

HGUC kit number 200 turns out to be Mobile Suit Type 100, the Hyakushiki. This could be considered the Revive Hyakushiki as Bandai has engineered this new Hyakushiki using the designs from other kits in the revive series. Hyakushiki comes with three different stickers for the eyes so you can choose your look as well as two Beam Sabers, a Beam Rifle, and the Clay Bazooka. All of which mount on the back of the MS when its not using them.    

Read more less

Sei Iori's FP Build Strike Gundam Full Package gets a Real Grade release from Bandai, complete with a variety of weapons--the Build Booster, beam rifle, beam gun (combinable with the beam rifle), two beam sabers, and shield. It also comes with extra hands to hold the weapons.

Read more less

The newest Perfect Grade kit is none other than the Strike Freedom Gundam! The Strike Freedom, with its expandable Super Dragoons, is the largest PG kit ever released. Completely new molds were used in the production of this kit and Bandai has outdone themselves when it comes to engineering something made of so many small (and not so small) parts, particularly in the joints and armor where the gold frame parts are viewable. Bandai has designed new, sturdier joints to hold this hefty kit once it is completed, and it includes weapons and accessories such as the Beam Shield, two Beam Rifles, two Railguns, eight Super Dragoons, a display base, and an LED unit for the head! Plus Katoki Hajime's notorious plethora of markings! Are you game?

Read more less

Designed by master mecha designer Hajime Katoki, Bandai's Master Grade ZZ Gundam Ver. Ka is fully transformable into the G-Fortress! The robot's torso forms the Core Block,which transforms into the Core Fighter; it can also combine with the Double Beam Rifle, Core Top (the Gundam's upper body) and Core Base (the lower body) to form the full G-Fortress. The forehead contains the powerful Hi-Mega Cannon. More mechanical detail has been added inside the gaps that open during transformation or posing, the knee joints have been improved with a sliding mechanism, and it also comes with its sizable backpack! In addition to the Double Beam Rifle, it's armed with two Beam Sabers and more. You won't want to miss out on this historic kit, so order it today!As a special bonus, this kit will also include a sheet of Premium Decals unique to the MG ZZ Gundam Ver.Ka for an even more intense and detailed look! These decals are only available with purchase of this kit, and are not available with the normal version.

Read more less

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided.

Read more less

The incredibly fast Gundam F91 appears in a modern high-grade kit! Part of the All Gundam project which seeks to bring new modern kits from older Gundam titles, the F91 shares a common construction with other kits to allow for part swapping and easy customization. Alternate face and deployed shoulder fin parts can be easily part swapped out for display! Weapons include beam rifle, beam shield, beam sabers, beam launcher and movable VSBRS! Numbering for "F91" is engraved on shoulders.

Read more less

Here comes Storm Interceptor - Royal Enforcer by Nuke Matrix! This is a highly detailed model kit from the Cyber Forest Fantasy Girls series, made with high quality materials. Wait no more, get this superb kit for yourself now!

Read more less

Motor Nuclear - Legend of the Star General Model Assembly Kit MNP-XH06;Here comes Wei Yuan Style 威远式·学员机 from the Motor Nuclear, Legend of Star General series! Get one for yourself today!

Read more less

Bandai's taken the incredible plamo technology of the Master Grade (MG) series and condensed it into the body of an SD Gundam! The very first kit in the high-end SD brand "MGSD" lineup is the Freedom Gundam, packed with the most mobility, gimmicks, and details in the history of the SD series! When built, the MGSD Freedom Gundam is approximately 115mm in height, with many parts of the internal frame equipped with movable gimmicks for smooth articulation. The main camera and twin eyes are made of double-layered structure with clear parts. Bandai's new "Real Metallic Gloss Injection" technology is used in various parts to achieve a metallic effect. New "Reflection Cut" reflective mechanism is used on the clear parts inside the wing binder. Molding color of the external armor is 2-tone color composition to add more precision. The head is movable on three axes. The internal structure allows for a variety of poses such as chin pulling and face protrusion. Multiple movable axes built into the torso allow for a wide range of left/right swinging, forward/backward tilting motion. Swingable hip joints greatly increase the range of motion of the legs. Swing mechanism at the shoulder joints enhances the range of motion of the arms. Forearms are equipped with an extension gimmick, allowing the arms to be bent deeper. Knee armor and vernier behind the knees are interlocked when bending the legs to ensure a full range of motion. In addition, the movable toes allow for a natural kneeling position despite being an SD. [Accessories] Beam Rifle x 1 Beam Shield x 1 Beam saber blade x 2 Marking sticker sheet x 1

Read more less

MJZ Studio collaborates with Sunday Hobby to bring us a model kit of their original character, Tengu Judge Yoshitsune! In honor of the anecdote that Yoshitsune learned martial arts from the Tengu of Mount Kurama, the exterior design of this majestic robot is designed to resemble a Tengu, and it comes with a full range of weapons and equipment, including a sword, a shakujo, and a feather fan! Don't miss out on this masterpiece mecha -- order yours today! Box Contents Pieces to build Tengu Judge Yoshitsune Sword Shakujo Feather fan Instructions

Read more less

Introducing the new model kit by IN ERA+ 无限新星 (Collaboration of Infinite Dimension & Supernova): Lizard from the RMD series! Lizard is a masterpiece of model kits. Enjoy recreating the intricate details of the Lizard RMD Series with this 1/100 scale model kit!  It comes with a huge range of armaments and weapons, including its double barrelled gatling guns and shape shifting axe! This is definitely a mecha you want in your collection! - Get yours today! Contents: Main body Inner frame Double barrel gatling guns Shape shifting axe Beam sabers

Read more less

Quantity: 1 piece/grit/packSize: 105 x 20 x 2mmGrit: #2000 #4000 #6000 #8000 #10000 Best five grits of sanding sponge for polishing Outstanding durability and performance with high efficiency

Read more less

The Gundam Kimaris Vidar from "Mobile Suit Gundam: Iron-Blooded Orphans" is armed with its assertively-sized Gungnir lance and sword! Fully posable after assembly, molded in color so painting isn't necessary (although, as with just about any kit, some paint will help it look even more amazing). Don't miss out, order today!

Read more less