Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)Examples of use:Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct.
Note:Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.
Introducing the Professional-Grade DSPIAE BP-SP PLASTIC BALL JOINT STRENGTHENING PEN, your ultimate tool for model repairing and enhancing! Crafted with precision and designed for perfection, this tool is specifically designed to reinforce and strengthen model joints, ensuring long-lasting durability.
With its easy-to-use functionality, simply apply the strengthening solution with the pen's precision tip directly onto the joint area, and witness the instant and remarkable results. The formula is specially formulated to provide maximum adhesion and reinforcement, ensuring that your model stays intact and stable.
Get yours now!
Size: 300 x 200 x 40 mm
Product Features:
Hold many of alligator clip / crocodile clip
For most of the spray painting task like airbrushing / colouring / painting / repairing model parts
The SF-15 Siren nano polishing file is made from high-quality tempered glass which incorporates nano technology during the production process.
It offers a superior filing experience and unparalleled buffing ability.
Get one and enhance your model kit building experience today!
The Dspiae ST-A 3.0 Ultra Fine Single Blade Nipper is single-bladed design, specially designed to improve cuts on plastic models and improve the efficiency of the builder.
Comes with a free bottle of anti-rust oil to maintain your nippers and other tools!
Get this amazing set for yourself now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Beautify your display setup with this effect accessory set, specially crafted for the High Grade Gundam Aerial! Can be combined with the 'The Witch From Mercury' Display Stand to showcase Gundam Aerial at its finest!
Model kit, Gund-bit Weapons are not included.
Quantity: 2 Sanding Sponge Stick/PackSize: 180 x 20 x 4mmGrit: #400 + #600/#800 + #1000
MADWORKS is dedicated to providing a comprehensive product solution to address various challenges that arise in the process of completing a job. These challenges may include working on curved or uneven surfaces, as well as dealing with difficult-to-sand materials. Our ongoing pursuit is to find better ways to achieve the desired results.These foam sanding sticks are perfect for removing nubs as well as refinishing surfaces, long lasting as well as great to use in either flat or curved surfaces.
DSPIAE Markers are high-quality, professional-grade art markers designed for use in a wide range of modelling and creative applications. These markers are known for their exceptional color quality, durability, and precision, making them a favorite among artists, designers, and hobbyists alike.
Get yours now!
This brings out a realistic felling better than a painted top coat.
Mr.TOP COAT can be applied over slide marks(decals) without blemishes. A good way to eliminate differences between the paints and the slide marks is making the model surface smoother.
Introducing a High Grade kit of Agnes Giebenrath's Gyan Strom from the movie "Mobile Suit Gundam SEED Freedom"!The kit is equipped with a specialized internal structure "SEED Action System" for capturing iconic action poses from the film. It also features enhanced arm articulation thanks to the sliding mechanism in the shoulder armor connection.The distinctive beam axe, designed uniquely for this suit, can be mounted to the waist by swapping in the included storage grip. The movable wings allow you to position the missile launcher forward.By deploying the chest armor and inserting the Gatling parts, you can recreate the Gatling's extended state. It also includes a Heat Rod part that can be equipped on the right arm.Lastly, the Gyan Strom includesh effect parts that can be attached to the shield for added dynamic display options!
Rey Za Burrel's customised Blaze Zaku Phantom, in a terribly manly lilac and pale grey colour scheme, is nevertheless quite striking when completed.
Molded all in colour and featuring snap assembly, this kit also includes stickers for additional detail. Very nice!
Order it now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The distinctive Gundam Astray Gold Frame Amatsu Mina from "Gundam Seed Astray" features beautifully reproduced exterior textures, and the "Maga no Ikutachi" on its back can be expanded and retracted.
It's equipped with the Okitsu no Kagami, the Trikeros Kai, two of the Totsuka no Tsurugi, the Tsumuha no Tachi and two of the Maga no Shirahoko.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Bandai's Action Base is designed to hold kits from their SD Gundam, 1/144 scale models, HGUC, HG Gundam Seed, 1/100 scale models, MG, and Real Robot Revolution series. No other display bases from other companies come close what this amazing display base allows you to do!
The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on type holders (two screws and a nut are included) for attaching the main stand to the crotch of the kit. When using the U-shaped or screw-on holders, double-sided tape (small quantity included) should be applied in between the crotch of the kit and the holders to hold it in place. A name plate is included that can be attached to any one of the holes on the base. (The package notes that there may be cases of a kit not able to fit.)
Each Action Base 1 can be attached to up to six other Action Base 1s for you to create an amazing display filled with Gundam kits or other robot kits striking cool action poses!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Quantity: 20 pieces/packLength Size of Clip: 19cm
Product Features:
Used for holding and positioning small parts of model kit for airbrushing/spraying paint.
The soft plastic/rubber covered head is perfect to prevent scratching paint of the model kit.
DSPIAE Markers are high-quality, professional-grade art markers designed for use in a wide range of modelling and creative applications. These markers are known for their exceptional color quality, durability, and precision, making them a favorite among artists, designers, and hobbyists alike.
Get yours now!
Introducing the Gundam Barbatos from the groundbreaking "MGSD" series, a new dimension of SD High-End brand that combines the technology of MG (Master Grade) with the SD Gundam framework!
Standing at approximately 115mm tall, the SD-scale rendition of Gundam Barbatos faithfully captures the iconic "Gundam Frame" features. The head and neck can be articulated in four axes, allowing for various dynamic poses such as tilting the chin or looking up towards the sky.
The Barbatos is equipped with a wide range of motion achieved by incorporating movable axes within the torso, enabling swinging from left to right and forward and backward tilting. The movement of the chest is synchronized with the expansion and contraction of the side abdominal cylinders. The shoulder connection utilizes a swing mechanism, enhancing the range of motion for the arms. The cylinder on the elbow moves in tandem with the arm, providing synchronized articulation.
Featuring the unique MGSD original gimmick, pulling down the lower part of the shoulder armor activates the linked expansion of the central armor. The knee armor moves in conjunction with the bending of the legs, while the armor on the back of the knee can move independently without hindering the leg's motion.
The twin eyes are created using a double-layer structure, combining intricately detailed internal parts with clear parts for a stunning visual effect.
MGSD original clear parts with precision-shaped processing, designed to efficiently reflect light, are employed on the chest, knees, and shoulders, introducing a shining technique.
The Barbatos also utilizes the "Real Metallic Gloss Injection" material in glossy injection molding, enhancing the metallic sheen on the fine details.
The backpack allows for mounting a sword, a 300mm smoothbore gun, and a mace. The 300mm smoothbore gun can be transformed into a storage state by extending the barrel and rotating it 180 degrees.
The mace features an MGSD original gimmick where pushing the handle extends the tip and unfolds four blades in synchronized motion.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
DSPIAE Markers are high-quality, professional-grade art markers designed for use in a wide range of modelling and creative applications. These markers are known for their exceptional color quality, durability, and precision, making them a favorite among artists, designers, and hobbyists alike.
Compared to traditional acrylic tips, DSPLAE's nylon tip used on its markers features smoother paint flow, smoother coating and finer metal particles, further enhanced by self-leveling. formula, even novice users can easily achieve a stunning, professional finish.
Dual Tip Design - 0.5/2.0mm tips are installed/stored at the end of the marker/inside the cap. Wrap with a tissue to remove the installed tip and insert another one for a simple exchange that better meets your demands.Gently paint the piece with a long, even stroke with a unidirectional movement, avoid painting in a cross pattern.
Before first use, shake well and squeeze the tip to release trapped air.Do not touch the paint coating until it is completely dry after 12 hours.
Get yours now!
