Bandai

From "Mobile Suit Gundam Wing", the "MG Tallgeese II" appears in a special coating.The white exterior has a titanium finish with white-plating, each of the blue, yellow, and red colored parts has a metallic color, and the frame parts and weapons parts also have a metallic color. With an extending Dover Gun, you can recreate scenes from the show like firing braced against the ground. It also includes Treize Khushrenda and Lady Une figures, Treize Khushrenda in his pilot suit, and special Tallgeese II water slide decals. Get yours now!

Read more less

The Tallgeese as seen in the "Gundam Wing: Endless Waltz" OVA joins the Real Grade model kit lineup from Bandai! Fully posable after assembly, it features its Super Vernier, its Dover Gun with cartridge exchange and a blowback gimmick; the Tallgeese also has a locking mechanism to add stability, so you can pose it even with large weapons! You won't want to miss out on this one, so order it now! [Mold Color]: White, black, yellow, pale gray, translucent pink, red, dark blue, clear [Includes]: Dover gun Circle shield Beam sabers (x2) Decals

Read more less

The MG 1/100 Sazabi Ver. Ka special coating is a limited edition Gunpla from Gundam Base, the official Gunpla facility for Gunpla fans around the world! The Gundam Base Limited Special Coating Ver uses plating and metallic molding colors in various parts. Order this amazing Gunpla for yourself today!

Read more less

Bandai Spirits adds the Gundam Exia to the Recirculation Color Eco-Pla project series also to celebrate the launch of the Gundam Next Future event series! The kit shares the same molds with the MG 1/100 Gundam Exia and is molded in eco-plastic added with neon colors to add highlights to its armors. The kit is also completed with decals for detailing, and Exia's original weapons equipment including: GN Sword, GN Long Blade, GN Short Blade, GN Beam Saber x 2, GN Beam Dagger x 2), and a GN shield. Get yours now!

Read more less

The Gundam Base Japan has released the clear color version of the HG 1/144 Gundam Calibarn from the Mobile Suit Gundam: The Witch from Mercury anime series! The kit includes GUND bits, which can be displayed in combination with two sets of the Mercury Witch Weapon Display Base, sold separately. Additionally, the kit comes with the Variable Rod Rifle, a long portable firearm that serves as the main weapon. A clear colored escutcheon and a display base are also included. Get yours now!

Read more less

The Life-Sized Freedom Gundam Statue installed and exhibited at Mitsui Shopping Park LaLaport Shanghai Jinqiao in Shanghai, China has turned into an RG plastic model kit, the RG FREEDOM GUNDAM (VER. GCP)! Now available in Clear Color! It has new landing gear parts based on the settings of the statue, and open hand parts that can be used to display the kit in the same pose as the statue. The panel lines throughout the body and intricate details are reproduced with newly designed armor parts. It also comes with Realistic Decals that can be used to reproduce markings and metallic sheens, a Beam Rifle, Beam Sabers, and a Shield. It can also be posed in Full Burst Mode.

Read more less

The popular Metalgarurumon (Black Ver.) from the Digimon series will be available as a Figure-rise Standard Amplified kit! The blue sections of the Metalgarumon have been changed to black and the gold sections are now silver. The light blue sections have been changed to white parts to recreate the color scheme of the Black version. Includes 1 sticker sheet and action base. Order this impressive beast for your own collection now!

Read more less

From the latest in the Gundam series "Mobile Suit Gundam: The Witch from Mercury", a Mirasoul flight unit for Gundam Aerial is now available! The arms extending from the backpack are connected with ball joints at both the tip and base. Built in mechanical parts are partially exposed, and the internal mecha mold has been expressed. Comes with flat hand parts that can be used with the "HG 1/144 Gundam Aerial" (sold separately). The grip of the beam saber for "HG 1/144 Gundam Aerial" (sold separately) can be attached to the unit. [Accessories]: Hand parts x 1 Sticker x 1

Read more less

Gundam Heavyarms from "Mobile Suit Gundam Wing" brings its overwhelming firepower to Bandai's latest HG model-kit format! With a wide range of motion possible on the frame from added articulation on the waist and leg joins in particular you can recreate many dyanmic poses. It's equipped with various weapons such as its chest gatling gun, shoulder-mounted homing missile, leg micro missiles, etc. The Beam Gatling can be attached to the left arm and backpack; the right arm is equipped with an army knife. Display it in its Full Open configuration to display its full destructive capability. Order yours today! [Includes]: Beam Gatling Army knife Foil seals

Read more less

What could be better than a new Gundam model kit? A new Gundam model kit that comes with snacks! Heart fulfills our fondest wish by bringing us this special gift of a limited-color, easy-to-assemble Gunpla of the Strike Gundam from "Gundam Seed" packed with a 20-gram bag of delicious treats! It's a wonderful gift for someone special -- maybe even for yourself! Place your order today!

Read more less

The 30MM (30Minutes Missions) Spinatio is now available in a Maxion Army specification! This all-in-one item combines armor and weapon parts in addition to the main figure; while taking full advantage of the range of mobility, there's no pinching during assembly. Various weapons such as assault rifles, combat knives and shields are included, and a common 3mm joint structure allows you to combine existing 30MM items with this kit. Order yours now, and build your ultimate army! [Includes]: Assault rifle Shield Combat knife Hand parts (x5 -- weapon-holding left and right, flat hand left and right, rifle hand right) Armor (x1 set) Joint parts

Read more less

As part of their "30MM Option Parts" lineup, Bandai brings us this set of a large cannon and an arm unit! These option parts are ready to make your "30Minutes Missions" or "30Minutes Sisters" figure kits even more powerful and formidable! Customized head parts are also included. The large cannon and arm unit can be combined with the "30MM 1/144 Option Parts Set 9 (Large Booster Unit)" and "30MM 1/144 Option Parts Set 10 (Large Propellant Tank Unit)" to create a fully armored form! The head parts can be combined with items such as the "30MM 1/144 Option Parts Set 7 (Customized Head B)." All are sold separately. Order yours today! [Includes]: Large cannon Arm unit (left and right) Large hand parts: flat hand (left and right), grip hand (left and right) Customized head parts (mask x1, base parts x2)

Read more less

Bandai brings us a new brand of official material parts: welcome the "Customize Material" lineup! This set of pipe parts and multi-joints are ideal for 1/144-scale models, and make it easy for even beginning modelers to add details to their model kits! This set includes one Varnish Tube and two Lead Wires in black and red. A runner of multi-joints essential for customization is also included, including 3mm joints, C-type joints, and detail cover parts (includes round, hexagonal and roll-bar types). Use the joint parts to attach the Varnish Tube or Lead Wire to 3mm-diameter holes! Get ready to create your ultimate custom mecha, and order yours today! [Includes]: Varnish Tube (black/red) Lead Wire (black/red) (x2) Multi-joints

Read more less

The Armored Assault Mecha is now available in the 30MM Exa Vehicle series! It is a small Exa Vehicle with a distinct rounded form, allowing for a wide range of actions. A new form of Roy Roy is stored in the head, and can be rotated 360 degrees. Grenade launcher included. By combining with existing aircraft of the 30MM series, you can enjoy custom combinations. [Accessories]: Vehicle x 1 Grenade launcher x 1 Seal x 1

Read more less

From Bandai comes a Figure-rise from "Digimon" of the standard version of Amplified Omnimon! It's the first appearance of the amplified series, with features looking better than ever as a boost to the original design! Each part features sharp detail to make the unique features of Omnimon stand out, including potential for future expansion in the waist part. Also known as Omegamon in Japan. Get yours today! [Includes]: Molded parts (x11) Foil sticker Manual Garuru Cannon Gray Sword Part for an ACTION BASE (base not included)

Read more less

Here's a set of expansion weapons for your 30MM Cielnova! Joint parts to allow the Cielnova to hold the weapons are included too. Order yours today! [Set Contents]: Handgun parts Sniper rifle parts Gatling gun parts Sword mace Large axe Kunai Shield Backpack Various joints

Read more less

The latest kit in the Real Grade line isn't a Gundam but it definiltey belongs in that group! The RG Skygrasper is an amazingly detailed 1/144 kit of the lovely spacecraft and also comes with all parts needed to make your Aile Strike Gundam (sold separately) into the Sword or Launcher Strike Gundam. The same amazing level of detail and engineering found in the previous RG Gundam kits is here full force in the Skygrasper. Get yours today!

Read more less

It's been a number of years since we saw a new MG 2.0 kit released and now Bandai's chosen an amazing suit to bring it to us again: the fan favorite Hyakushiki! This kit's armour will be mekki-plated with undergates so no gate marks are visible after assembly.  It will come with various eye parts so you can choose how you want the face to look, and the binders on its back will be attached via a flexible joint to allow a lot of movement.   This golden beauty will come with a Bazooka, Beam Rifle, two beam sabers, and marking stickers. Get yours today!

Read more less

Bandai's "Mobility Joint Gundam" lineup is a series of plastic action model kits with various interchangeable parts and stickers! Strike Gundam and Strike Rouge from "Mobile Suit Gundam Seed," Gundam Caliburn from "Mobile Suit Gundam: The Witch from Mercury," and G-3 Gundam from "Mobile Suit Gundan MSV" are partly new models! Strike Gundam can be enhanced and expanded to Perfect Strike Gundam by adding the EX parts, too! There are eight different items to collect and trade, randomly packed in boxes of ten; each comes with a piece of soda-flavored gum. Order yours today! [Figure Size]: Approximately 7cm x 5cm [Materials]: ABS [Lineup]: Strike Gundam Strike Rouge Gundam Caliburn G-3 Gundam EX parts for Strike Gundam EX parts for Strike Rouge EX parts for Gundam Caliburn EX parts for G-3 Gundam

Read more less

The Rising Freedom Gundam from "Mobile Suit Gundam Seed Freedom" gets a spectacular new "Metal Robot Damashii" action figure from Bandai! It features die-cast joints for stable posing and die-cast parts for a sense of weight; the coloring is complex to make this figure a joy to look at, and it's also loaded with armaments and transformation gimmicks! The die-cast parts are plated for a luxurious appearance; the wings have a large volume and a sharp shape for an unforgettable silhouette. The shield features a built-in wing deployment mechanism, and effect parts are also included, allowing you to display it in attack mode. The weapons can all be deployed; the rail gun on the waist has a built-in slide deployment gimmick. All the weapons and wings can be deployed to reproduce the impressive Heimat Full Burst! Two beam saber effect parts are included, as are various interchangeable hands. The head is movable to express the flight mode. This figure can also be transformed into its MA form -- there's a built-in deformation mechanism for storing the head and expanding the wings of the legs without parts replacement. Order this amazing new Metal Robot Damashii figure for your own collection today! [Figure Size]: Approximately 14cm tall [Materials]: ABS, PVC, die-cast [Set Contents]: Main figure Interchangeable hands (left and right, x3 each) Beam rifle Beam saber blade (x2) Shield Shield effect part A (x2) Shield effect part B  Spare antenna Shield joint set Stand joint set Beam shield (x2) Beam shield mount parts (x2) Special base set

Read more less

The Immortal Justice Gundam from "Mobile Suit Gundam Seed Freedom" gets a spectacular new "Metal Robot Damashii" action figure from Bandai! It features die-cast joints for stable posing and die-cast parts for a sense of weight; the coloring is complex to make this figure a joy to look at, and it's also loaded with armaments and transformation gimmicks! The die-cast parts are plated for a luxurious appearance; the characteristic coloring is reproduced with metallic gloss. The two wings connected to the back have a large volume and a sharp shape. The shield features a built-in wing deployment mechanism, and effect parts are also included, allowing you to display it in attack mode. Effect parts for the legs are included to reproduce close combat, and the beam rifle can be mounted on the waist.  Two beam saber effect parts are included, as are various interchangeable hands. The head is movable to express the flight mode. All the weapons can be deployed for impressive action poses, and the wings on the back have many points of articulation. This figure can also be transformed into its MA form -- there's a built-in deformation mechanism for storing the head without parts replacement. Order this amazing new Metal Robot Damashii figure for your own collection today! [Figure Size]: Approximately 14cm tall [Materials]: ABS, PVC, die-cast [Set Contents]: Main figure Interchangeable hands (left and right, x4 each) Beam rifle Beam saber, left and right Shield Shield effect part  Leg beam blade effect part, left and right Spare antenna Shield joint set Stand joint set Hand parts for Rising Freedom Gundam (left and right) Special base set

Read more less

Bandai presents a set of two different cloaks for use with their "30MM" (30 Minutes Missions) model-kit series! They're just what you need to give your figures that dramatic windblown look; ball joints in various places allow movement, and two types of muffler parts are also included. Try them on your Acerby figures! They can be painted and customized as you wish. Order yours today! [Includes]: Long cloak Short (three-part) cloak Muffler (x2)

Read more less

These "30MM" (30Minutes Missions) option parts expands the range of customization you can achieve! A wide variety of parts are included, such as open hands, grip hands, pointing hands, and several different types of weapon-holding hands. The hands are in two sizes: 1.1 times the size of the S size, and 1.2 times the size of the M size, to expand the range of expression. Three types of glove parts are also included, in gray and white. A runner set with multi-joints is also included, with 3mm joints, C-type joints, and detail cover parts. Order yours today! [Includes]: Hand parts, S (x6 pairs -- left and right) Hand parts, M (x3 pairs -- left and right) Hand parts, M, C type (gray x4, white x2) Back part, S, A type, gray (x4), white (x2) Back part, S, B type, gray (x4), white (x2) Multi-joints

Read more less

The newest addition to Bandai's "Pokemon" Plamo Collection is No.46, the legendary Sky High Pokemon, Rayquaza! You can now build this magnificent beast with your own hands! Each node of this dragon's body can be rotated, which allows unique and dramatic poses during display. Rayquaza's jaw and front arms are also moveable. The length of Rayquaza once assembled can exceed more than 20cm, too - the longest of the Pokemon Plamo to date! A pedestal is included for display, as well, and takes on the shape of clouds to really make it look like it's flying in the sky! Order today!

Read more less