Products
BANDAI RG 1/144 RX-93 NU GUNDAM
Amuro Ray's NU Gundam gets an RG kit release from Bandai! Its distinctive colors are carefully reproduced, including three shades of light gray to increase the visual depth. The shoulder and abdomen joints are fully flexible to give it increased posability, and the shoulder armor can also flex with more dynamic posing. The leg armor can slide with the movement of each joint, too. It's fully armed with its beam rifle, hyper bazooka, missiles and more - order it today!
$70.90$61.90
BANDAI RG 1/144 SAZABI GUNDAM
This is the Sazabi you've been waiting for: the RG realization of the mobile suit piloted by the Red Comet, Char Aznable himself, in "Mobile Suit Gundam: Char's Counterattack!" This Sazabi kit was created in pursuit of a realistic, detailed representation of the mobile suit from the series. Even simple armaments like the arm cylinders and funnels, as well as propulsion mechanisms like the verniers and backpack, have been faithfully recreated.The mechanisms in this kit and its high range of motion allow for the recreation of a variety of poses from the movie, despite being condensed into 1/144 small scale kit, thanks to the carefully crafted lifelike gimmicks for which the RG line is known.In addition to several hand parts, this kit includes all of the characteristic armament you'd expect.
$74.90$65.90
BANDAI RG 1/144 SKYGRASPER LAUNCHER/SWORD PACK
The latest kit in the Real Grade line isn't a Gundam but it definiltey belongs in that group! The RG Skygrasper is an amazingly detailed 1/144 kit of the lovely spacecraft and also comes with all parts needed to make your Aile Strike Gundam (sold separately) into the Sword or Launcher Strike Gundam. The same amazing level of detail and engineering found in the previous RG Gundam kits is here full force in the Skygrasper. Get yours today!
$44.90$37.90
BANDAI RG 1/144 STRIKE FREEDOM GUNDAM
The Real Grade Strike Freedom is the first RG kit with the frame molded in this gold color. The Dragoons even feature gold plating for that beautiful result right out of the box. Does not include a stand.
$53.90$45.90
PREMIUM BANDAI RG 1/144 STRIKE FREEDOM GUNDAM (DEACTIVE MODE)
The RG series brings you detailed premolded coloring never before seen in 1/144 scale. Its latest release, the Strike Freedom Gundam, is now available in Deactive Mode coloring. An inner frame with matte silver plating and realistic decals combine to help recreate the Deactive Mode colors in RG.
$89.90$77.90
PREMIUM BANDAI RG 1/144 SWORD IMPULSE GUNDAM
Premium Bandai® Gunpla Real Grade 1/144 RG ZGMF-X56S/β SWORD IMPULSE GUNDAM Based on its appearance in the classic Gundam SEED Destiny anime! This 1/144 scale Real Grade version of the Sword Impulse Gundam comes with pieces to build its iconic Sword Silhouette pack, along with its Silhouette flyer, high-energy beamrifle, mobile shield, and more seen in the anime. Recreate scenes using the included beam effects for an incredible display!
$79.90$69.90
PREMIUM BANDAI RG 1/144 UMA LIGHTNING'S ZAKU II
The RG Uma Lightning's Zaku II is a 1/144 scale model kit in 2020, which comes in its “Blue Thunder” color. Supplied with the same mold used for Real Grade Johnny Ridden's high-mobility Zaku, bold actions and poses can be performed with its wide-range articulation. Get yours now!
$54.90$47.90
BANDAI RG 1/144 UNICORN GUNDAM
In the fall of 2017, a 1/1 scale RX-0 Unicorn Gundam will be installed at the Diver City Tokyo Plaza shopping center, and to commemorate the event, Bandai is bringing out this amazingly detailed RG Unicorn Gundam! It features an advanced inner framework, and it can transform between Unicorn mode and Destroy mode. It's armed with a Beam Magnum, a Hyper Bazooka, a shield and two beam sabers. Don't wait on this one, order it today!
$63.90$55.90
BANDAI RG 1/144 UNICORN GUNDAM 02 BANSHEE NORN
The Unicorn Gundam 02 Banshee Norn gets a Real Grade model kit release from Bandai! It features a flexible inner frame for supreme posability after assembly, and it can transform into its Banshee Norn mode, too! It's equipped with two Beam Sabers, the Beam Magnum and an effect part, the Revolving Launcher, the Armed Armor DE, the Armed Armor XC, and realistic decals. Check out the limited-edition premium box version, too!
$66.90$58.90
BANDAI RG 1/144 WING GUNDAM
A brand-new RG kit of one of the most popular Gundams out there: the Wing Gundam from "Gundam Wing!" This kit recreates the original Wing Gundam as it first appears in the anime series. Various gimmicks and mechanisms have been crafted in 1/144 scale to allow the Wing to be displayed in poses straight from the anime. Articulation gimmicks have also been created in the wings to give them more bird-like posing abilities. Get yours now!
$54.90$47.90
BANDAI RG 1/144 WING GUNDAM EW
Bandai's new Real Grade kit of the Wing Gundam from "Endless Waltz" is here! Can be displayed in robot or fligh form. Molded in black, white, red, yellow, blue and clear green, it has decals and stickers for markings, plus detailed, heavily illustrated instructions.
$41.90$36.90
BANDAI RG 1/144 WING GUNDAM ZERO EW
Bandai's Real Grade lineup just got even more awesome with the addition of the highly anticipated Wing Gundam Zero from "Endless Waltz"! It's built on a "Zero Frame," which allows amazing posability. Some of the feathers on its magnificent wings will also be posable thanks to unique joints. It comes with two buster rifles which can be joined into one for the ultimate in firepower! Don't miss out on this iconic Gundam, and order now! Parts are molded in pale grey, dark grey, navy blue, red, clear, and yellow plastic. Paint is not required, but may be used for more a more realistic look. Instructions are in Japanese, but are fully-illustrated for ease of assembly regardless. Decals are included with this kit.
$41.90$36.90
BANDAI RG 1/144 ZETA GUNDAM
Bandai marks the 10th release in their Real Grade line with the mighty Zeta Gundam. In the anime, and in MG and PG kit forms, the Zeta transforms into its Wave Rider form and the big question being asked when Bandai announced an RG Zeta was if it would a transforming kit. And it is! Bandai's RG MS Advanced Joint frame took 1/144 scale kits to a whole new level and the Zeta raises the bar again thanks to the amazing transformation engineering. Like previous RGs the Zeta features various armor color tones as well as an abundance of marking stickers but this guy can transform!
$49.90$43.90
FLAMING SNOW RG-01 | 1/144 RX-78-2 GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-03 | 1/144 AILE STRIKE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-04 | 1/144 FREEDOM GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-05 | 1/144 MK-II A.E.U.G./TITANS FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-06 | 1/144 JUSTICE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-08 | 1/144 00 GUNDAM SEVEN SWORD FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-09 | 1/144 00 GUNDAM SEVEN SWORD/G INSPECTION FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-10 | 1/144 ZETA GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-11 | 1/144 DESTINY GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW RG-14 | 1/144 STRIKE FREEDOM GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$7.90$6.90
FLAMING SNOW RG-17 | 1/144 WING GUNDAM ZERO EW FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
