Products
BANDAI PG 1/60 STRIKE ROUGE + SKY GRASPER
Gorgeous! Bandai's Perfect Grade line continues with Gundam Seed's "Strike Rouge," superbly molded in coloured plastic, with the same fantastic construction quality demonstrated in previous PG kits. A whopping number of parts are included in the typically-large (and heavy!) box -- besides the Strike Rouge, there are parts included for the Skygrasper and Aile Striker! Metal-plated parts (in pink!) are included for the Strike Rouge's custom weapons. Screws, springs, fabulous Gundam Stickers and dry-transfer decals are included; two construction manuals (one for the Strike Rouge, one for the Skygrasper and Aile Striker) are included to walk you through the building of all three models. An "instruction manual" is also included for those who like to paint their Gundam models (of course it doesn't need to be painted), and also for indicating precise locations of the markings.
$309.90$266.90
BANDAI PG 1/60 UNICORN GUNDAM
Piloted by Banagher Links, the PG Unicorn is the first Perfect Grade Bandai kit in four years, and the most impressive to date. A spectacular separate LED kit can be purchased to bring Unicorn to life in light on display! Fans can expect an array of extraordinary features from this kit -- A perfect reproduction of the transformation from Unicorn mode to Destroy mode (face guard expansion included) The full-body red Psychoframe employs special transluscent plastic for the 30-piece LED kit (sold separately) to shine through The blade antenna, which can be expanded or collapsed for transformation, utilizes a magnet to display a beautiful, single horn in Unicorn mode, and the inner parts of the horn expose colored gold in Destroy mode Elbows and knees are made to achieve the utmost range of movement without detracting from the appearance of their exteriors Armament units around the knees are moveable in every mode
$333.90$288.90
BANDAI PG 1/60 UNICORN GUNDAM 2 BANSHEE NORN
The PG Banshee Norn shares the same frame with the PG Unicorn Gundam but instead of the Unicorn's Gatlings and Bazooka you get that massive Norn backpack as well as the giant shield and parts to make the launcher for the rifle. The Banshee comes with that giant display base and Detron stickers for markings. Get this remarkable kit for yourself now!
$369.90$319.90
BANDAI PG 1/60 WING GUNDAM ZERO CUSTOM
The most impressive model in Bandai's history is finally here! This kit has too much to list in detail, so please be willing to settle for the highlights:30-plus runners of parts (670 total pieces). About 30 locations secured by metal screws. Two different locations (eyes and chest) light up on the finished kit. Full inner mechanism detail on all limbs. Opening panels on the head, chest, and more. Fingers are individually jointed. Comes with two beam sabers and two huge beam rifles. Locking systems provide stability so things don't flap around like they tend to do on the Master Grade kit. Comes boxed in three separate inner boxes plus a special box that contains the 14 individual "feathers" made from plastic-coated thin metal, plus the metal joint parts, screws, and other goodies. Two separate manuals are included. The first, the INSTRUCTION manual (text is in Japanese), has numerous photos of the kit in various construction steps plus painting guide, history of the unit and the Battle Zero unit, cross sections, and an interview with the designer of the kit. The second, the CONSTRUCTION manual, has the actual assembly instructions and details. No English text but the diagrams are self-explanatory.This is a very complex model kit and, as our "Skill Level 4" rating indicates, is not recommended for beginner modelers.
$245.90$215.90
BANDAI PG UNLEASHED 1/60 RX-78-2 GUNDAM
Are you ready for the ultimate Gundam kit? The PG Unleashed RX-78-2 Gundam is history-making in its number of gimmicks and new technologies, resulting in a splendid build like you've never seen before! It features the Gunpla Evolution Link System, which adopts a step-by-step assembly process to simulate the experience of building a real Mobile Suit! Its internal frame, which serves as its skeleton, is assembled in the earliest stage in the history of the Perfect Grade lineup, and it's also the largest frame in the history of Gunpla, with a total height of about 18cm. The kit will have over 90 points of articulation after assembly -- the largest number of joints in Gunpla history! -- for extreme posability! Its fuselage, which uses a core block mechanism, uses a new structure that combines 40 joints. Metallic molding color and plated parts are used for the multi-layer truss frame to create four distinct metallic expressions; three kinds of secondary processing such as silver plating, matte plating and chrome plating are combined with metal parts and newly developed etched seals to make the Gundam look even more amazing than ever before. In addition, this kit is equipped with the most full-body open-hatch gimmicks ever seen in a Gundam kit, and it also includes a new LED unit! The unit includes a new compact RGB two-lamp type LED light that enables color change, and a design that maximizes its efficiency. A very small lighting unit is also installed in the beam saber! The beam blade will be lit from the base in a gradation for ultimate realism. A pin-type BR435 lithium battery (one test battery included) and two LR41 button-cell batteries (not included, sold separately) are required for the light effects. Don't miss out on this ultimate Gundam kit -- order yours now!
$429.90$377.70
FLAMING SNOW PG UNLEASHED 1/60 RX-78-2 GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW PG-01 | 1/60 GUNDAM EXIA FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$10.90$8.90
FLAMING SNOW PG-02 | 1/60 00 GUNDAM SEVEN SWORD FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$10.90$8.90
FLAMING SNOW PG-03 | 1/60 UNICORN GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW PG-04 | 1/60 UNICORN GUNDAM BANSHEE NORN FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW PG-07 | 1/60 RX-78-2 GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW PG-08 | 1/60 PERFECT STRIKE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$8.90$6.90
FLAMING SNOW PG-09 | 1/60 STRIKE FREEDOM GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$9.90$7.90
FLAMING SNOW PG-10 | 1/60 00 RAISER FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$8.90$6.90
FLAMING SNOW PG-12 | 1/60 UNICORN GUNDAM PERFECTIBILITY FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$9.90$7.90
BANDAI POKEMON PLAMO COLLECTION 04 SELECT SERIES LUGIA
This simple snap-fit plastic kit set allows modelers to build a slightly articulated 12cm Lugia. All parts come molded in color and a sheet of stickers is provided for detail so no painting is required. A display base with stand is included. Includes exploded-view pictorial-type instructions, with notes in Japanese. Order yours now!
$13.90$11.90
BANDAI POKEMON PLAMO COLLECTION 05 SELECT SERIES HO-OH
This simple snap-fit plastic kit set allows modelers to build a slightly articulated 10cm Ho-Oh. All parts come molded in color and a sheet of stickers is provided for detail so no painting is required. A display base with stand is included. Includes exploded-view pictorial-type instructions, with notes in Japanese. Order yours now!
$13.90$11.90
BANDAI POKEMON PLAMO COLLECTION 32 SELECT SERIES MEWTWO
This simple and fun snap-fit plastic kit set allows modelers to build a slightly articulated Mewtwo. All parts come molded in color and a sheet of stickers is provided for detail so no painting is required. A display base with stand is included. Includes exploded-view pictorial-type instructions, with notes in Japanese. Order yours now!
$13.90$11.90
BANDAI POKEMON PLAMO COLLECTION 41 SELECT SERIES PIKACHU
From Bandai's Poke Pla (Pokemon Plamo) collection comes a fun and easy to build kit of Pikachu! Two expressions are included, and Pikachu is posable after assembly for tons of display options. Be sure to add him to your collection! Order yours now!
$13.90$11.90
BANDAI POKEMON PLAMO COLLECTION 42 SELECT SERIES EEVEE
The ever-popular and adorable Eevee from "Pokemon" gets a plastic model kit from Bandai! Eevee will come with two expressions to choose from (normal, smiling). Order today, and build your own Eevee!
$13.90$11.90
BANDAI POKEMON PLAMO COLLECTION 44 SELECT SERIES RIOLU & LUCARIO
Riolu and Lucario are now part of the Pokepla Select lineup from Bandai, with new molds! They're molded in color, and the parts snap off the gates easily, for fast assembly; move their arms to reproduce the Hadodan pose, and use the included foil stickers for their features! Order yours today!
$21.90$18.90
BANDAI POKEMON PLAMO COLLECTION 46 SELECT SERIES RAYQUAZA
The newest addition to Bandai's "Pokemon" Plamo Collection is No.46, the legendary Sky High Pokemon, Rayquaza! You can now build this magnificent beast with your own hands! Each node of this dragon's body can be rotated, which allows unique and dramatic poses during display. Rayquaza's jaw and front arms are also moveable. The length of Rayquaza once assembled can exceed more than 20cm, too - the longest of the Pokemon Plamo to date! A pedestal is included for display, as well, and takes on the shape of clouds to really make it look like it's flying in the sky! Order today!
$26.90$22.90
BANDAI POKEMON PLAMO COLLECTION 47 SELECT SERIES GRENINJA
Greninja is the latest addition to the Pokemon Plastic Model Collection, which combines an easy-to-assemble parts structure with color-coding and movement! The arms and legs are movable to allow for various poses. Two types of effect parts are included in clear molding for a sense of ultra-realism and diverse posing options. Add this Pokemon to your plamo collection today! [Accessories] Two types of effect parts Leg parts for posing Pedestal Foil sticker
$20.90$17.90
BANDAI POKEMON PLAMO COLLECTION 48 SELECT SERIES GARCHOMP
Garchomp is the latest addition to the Pokemon Plastic Model Collection, which features an easy-to-assemble parts structure, color-coded parts, and movement! Once completed, it'll measure approximately 16cm in length. Garchomp's mouth, neck, arms, elbows, legs and tail are all poseable, allowing for dynamic displays. Order today!
$21.90$18.90
