Products
HOBBYMIO CROCODILE CLIP HOLDER BASE
Size: 300 x 200 x 40 mm Product Features: Hold many of alligator clip / crocodile clip For most of the spray painting task like airbrushing / colouring / painting / repairing model parts
$5.90$4.90
HOBBYMIO CROCODILE CLIP HOLDER BASE & 20 PCS CROCODILE CLIP (SOFT RUBBER TIP)
Quantity: 20 pieces crocodile clips/pack + 1 clip holder baseLength Size of Clip: 19cmSize of Holder Base: 300 x 200 x 40 mm Product Features: Used for holding and positioning small parts of model kit for airbrushing/spraying paint. The soft plastic/rubber covered head is perfect to prevent scratching paint of the model kit. Hold many of alligator clip / crocodile clip For most of the spray painting task like airbrushi.ng / colouring / painting / repairing model parts.
$14.90$12.90
MDS DISPLAY BASE 1 (BLACK)
This multi-functional and versatile Display Base, designed based on the Action Base 1 by Bandai, can hold 1/100 scale models, 1/144 scale models and even SD model kits! Easy to assemble, wallet-friendly and great for displaying your model kits, allowing them to recreate their actions or poses from their anime! Get one for yourself now!
$5.90$4.90
MDS DISPLAY BASE 1 (CLEAR)
This multi-functional and versatile Display Base, designed based on the Action Base 1 by Bandai, can hold 1/100 scale models, 1/144 scale models and even SD model kits! Easy to assemble, wallet-friendly and great for displaying your model kits, allowing them to recreate their actions or poses from their anime! Get one for yourself now!
$5.90$4.90
TAKARA TOMY DREAM TOMICA CUP NOODLE COLLECTION 1BOX 6PCS
Dream Tomica Cup Noodle Collection (ドリームトミカ カップヌードルコレクション) is a Tomica trading figure set released within the Dream Tomica toyline. It is primarily released in Japan. The toy includes the six different cars inspired by different flavors of Nissin brand cup noodles. Each package comes with one random figure. Figures included are: Cup Noodle Seafood Cup Noodle Curry Cup Noodle Chili Tomato Cup Noodle Miso Cup Noodle Spicy Noodles Cup Noodle Coriander-flavored Tom Yum Goong
$79.90$69.90
MADWORKS DSB-000 DUAL-GRIT FIRM SANDING SPONGE STICK 1PC 400/600; 1PC 800/1000
Quantity: 2 Sanding Sponge Stick/PackSize: 180 x 20 x 4mmGrit: #400 + #600/#800 + #1000 MADWORKS is dedicated to providing a comprehensive product solution to address various challenges that arise in the process of completing a job. These challenges may include working on curved or uneven surfaces, as well as dealing with difficult-to-sand materials. Our ongoing pursuit is to find better ways to achieve the desired results.These foam sanding sticks are perfect for removing nubs as well as refinishing surfaces, long lasting as well as great to use in either flat or curved surfaces.
$7.90$6.90
BANDAI DX 1/1 GUNPLA-KUN DX SET (WITH RUNNER VER. RECREATED PARTS)
Gunpla-kun is here in color! Gunpla-kun is made of LIMEX -- a new material that combines environmental consideration with the fun of plastic model kits! LIMEX ia a new eco-friendly material that contains more than 50 percent limestone as the main raw material, greatly reducing the use of conventional petroleum-derived plastics. This is the first time in history that LIMEX has been molded in full color! You can build Gunpla-kun into a full figure as shown here, or you can assemble him partially with some of the parts still on the runners and display him that way! He comes with his familiar armaments, such as the beam rifle, beam saber and shield. Order him today! [Includes]: Runner parts Stickers Beam saber Beam rifle Shield Base for display
$17.90$14.90
BANDAI EG 1/144 RX-78-2 GUNDAM
The RX-78-2 Gundam is now available in the Entry Grade series! The Entry Grade line is as beginner-friendly as always and is a great, fun build for experienced Gunpla builders. It uses a small number of parts despite having elaborate details and movement. The beam rifle and shield are included! Order today!
$12.90$10.90
BANDAI EG 1/144 RX-78-2 GUNDAM (FULL WEAPON SET)
In addition to the beam rifle and shield that come with the standard version, this Full Weapon Set for the ENTRY GRADE RX-78-2 Gundam also comes with two beam saber effects, a beam javelin, a hyper bazooka, and a Gundam hammer. Please be careful to use nippers to remove the clear parts of the beam saber from the runner. Order this awesome set today!
$17.90$14.90
BANDAI EG 1/144 RX-78-lā-III LAH GUNDAM
Ra Gundam from the upcoming "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse" joins the "Entry Grade" model kit lineup from Bandai! The parts are cast in color, and the patterns at its shoulders and waist can be made simply by assembling the model; it's made to be fully posable while reducing the number of parts. The parts can be easily removed from the gates without using nippers, too! Order this amazing new Gundam for your own collection today!
$17.90$14.90
BANDAI EG 1/144 RX-93 NU GUNDAM
The Entry Grade of the Nu Gundam is finally here! It possesses a wide range of articulation, so after a simple assembly you'll be able to create your very own unique Gunpla display! Order now!
$17.90$14.90
FLAMING SNOW EG-01 | 1/144 RX-78-2 GUNDAM (VER. BAIHU) FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW EG-04 | 1/144 NU GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW EG-05 | 1/144 STRIKE GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
FLAMING SNOW EG-06 | 1/144 RX-78-2 GUNDAM FLUORESCENT WATERSLIDE DECAL
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you! High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰) Steps for Applying Decals to Gunpla: 1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want. 2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet. 3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla. 4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish. 5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment. Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
$6.90$5.90
BANDAI FIGURE-RISE BUST ATHRUN ZALA
This fun kit to make a bust of Athrun Zala comes fully molded in color, and includes decals! Order today!
$20.90$17.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED ALPHAMON
Bandai brings us a new Figure-rise Standard Amplified model kit of the Alphamon from "Digimon X-Evolution"! The parts division is carefully designed to make the different-colored areas on the Alphamon stand out; the booster on its back is equipped with a movable fin that's original to this model! The cloak is made of an ultra-thin PET sheet for expressive posability. An effect sheet is included, too. Order this impressive beast for your own collection now!
$74.90$65.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED BEELZEMON
Beelzemon, the Demon King Digimon from "Digimon Tamers," has been added to Bandai's Figure-rise Standard Amplified model-kit series! The Berenjena shotgun weapons can be attached to its legs with joint parts; lead wires are used for the hair and tail, and two sets of interchangeable hands are included. Expansion ports are also included. Order yours today!
$74.90$65.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED BLACKWARGREYMON
The mighty BlackWarGreymon from "Digimon Adventure 02" joins the Figure-rise Standard Amplified lineup from Bandai! It's molded in its signature black and silver colors, with massive wings that can connect to its back, or changed to a shield and mounted to its arms. Effect parts are also included, as are foil stickers for the markings. Order this spectacular mecha-beast today!
$72.90$63.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED IMPERIALDRAMON PALADIN MODE
From the second season of Digimon Adventure, Imperialdramon makes a triumphant return to the Figure-rise Standard Amplified lineup, this time in Paladin Mode! This model building kit features the Omni Sword, a newly designed part that faithfully recreates the iconic weapon wielded by Paladin Mode. Don't miss out, order yours now!
$104.90$89.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED METALGARURUMON
Bandai brings us the awesome-looking Figure-rise Standard MetalGarurumon, the newest Digimon from the classic "Digimon Adventure" series in the Amplified series! Gabumon's Mega form is here, and it's styling, from his fearsome feral form to the high-energy wings, to the strong, bendable joints. The articulation has had careful detail considered, allowed for natural, beast-like poses - a special inclusion that Digimon fans will appreciate. MetalGarurumon's jaw can open and close naturally and with ease, as well. Make sure to use the included action base to recreate all of your favorite MetalGarurumon scenes and illustrations! Order today! [Accessories] Action base Foil sticker
$77.90$66.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED OMEGAMON (X ANTIBODY)
From "Digimon: DIGITAL MONSTER X-evolution" comes the 'X ANTIBODY' version of Omegamon, joining the Figure-rise Standard Amplified series from Bandai! It'll be approximately 20cm in height, and has connection holes in various places to allow for future expansion and customizations. The cloak can be expanded by changing the attachment position at the base. Order this awesome kit for yourself today!
$80.90$70.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED SHINEGREYMON
ShineGreymon from "Digimon Savers" joins the "Figure-rise Standard Amplified" model-kit series from Bandai! This light dragon type Digimon features pull-out shoulder joints to expand the range of movement, enabling him to hold the Geo Gray Sword with both hands! A movable axis in the tip of each foot enables him to stand firmly; the armor behind the knees is linked to the legs for a greater range of motion. The enormous Geo Gray Sword features jewel seals and PET seals, and in an original gimmick for this model, it can transform into a twin sword mode with parts replacement! When in twin sword mode, it can be mounted on each of ShineGreymon's legs. Each of the feathers on his wings can be individually moved, and a lead wire is built into his tail for flexibility. Hard points are placed in various areas throughout his body for expandability, too. Order him for your own collection today!
$81.90$69.90
BANDAI FIGURE-RISE STANDARD AMPLIFIED WARGREYMON
From Bandai comes a Figure-rise from "Digimon" of the standard version of Amplified WarGreymon! It's the first appearance of the amplified series, with features looking better than ever as a boost to the original design! Both arms are removable and can be attached together. The Brave Shield is able to take on a wing-like form and is detachable from the arm. Order this impressive beast for your own collection now!
$66.90$58.90