Bandai brings us a new line of Super Deformed (SD) Gundam called the EX Standard!
These new EX Standard kits come molded in multiple colors and feature limited articulation so you can get that perfect pose to display them! Foil marking stickers are also included to add extra colors and markings to your kit.
A new gimmick added with these EX Standard kits is the ability to borrow parts and combine them to make new weapons that can be used with 1/144 scale HG Gundam kits!
The Gundam Aerial from "Mobile Suit Gundam: The Witch of Mercury" gets a new SD Gundam EX model kit from Bandai!
It's adorably super-deformed, yet stylish and highly detailed, with a high degree of posability; it comes with its beam saber, beam rifle and shield. The rifle can be stowed on the back, and the shield can be separated and connected to the shoulder, too.
Order yours now!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
From "Mobile Suit Gundam: The Witch from Mercury" comes an HG kit of the Gundvolva!
Ball joints at the neck and waist are spaced to allow for a forward and backward leaning posture. A beam saber grip and beam rifle magazine can be stored behind the shield. The side armor has a movable axis and ball joints to ensure a movable range of motion at the waist. The beam rifle can be attached to and detached from the leg.
Get yours today!
Bandai's Real Grade lineup just got even more awesome with the addition of the highly anticipated Wing Gundam Zero from "Endless Waltz"!
It's built on a "Zero Frame," which allows amazing posability. Some of the feathers on its magnificent wings will also be posable thanks to unique joints. It comes with two buster rifles which can be joined into one for the ultimate in firepower! Don't miss out on this iconic Gundam, and order now!
Parts are molded in pale grey, dark grey, navy blue, red, clear, and yellow plastic. Paint is not required, but may be used for more a more realistic look. Instructions are in Japanese, but are fully-illustrated for ease of assembly regardless. Decals are included with this kit.
MG moves to Version 3.0 with this kit of the ever-popular RX-78-2!
With even greater articulation and posability than earlier versions, the Ver. 3.0 kit features a new dynamic armor system that works with the inner frame to create even better movement and positioning.
An amazingly engineered snapfit kit molded in multiple colors, with excellent peel-off stick-on markings.
Another great SEED Master Grade kit from Bandai, with a twist. Well, actually several twists.. and turns.. as you transform the Aegis Gundam into its Mobile Armor form.
That's right, the MG Aegis transforms! No part swapping is used in the transformation which is a tribute to the amazing design and engineering from Bandai. Stand not included.
The spectacular Banshee Norn Destroy Mode from "Gundam Unicorn" is molded in color, is posable after assembly, and features some clear parts and stickers for detail.
Order yours now!
From "MOBILE SUIT GUNDAM SEED DESTINY", a Blast Impulse Gundam for artillery battles appears in Master Grade!
"Blast silhouette" with various gimmicks is reproduced by new modeling. Three-dimensional artillery unit "Blast Silhouette" with the latest MG-compliant high-density details.
Shinn Asuka's Sword Impulse Gundam made its flashy introduction in the first episode of the "Mobile Suit Gundam Seed Destiny," and now is offered as this much-anticipated Master Grade kit!
Utilizing the same hyper-detailed and extremely well-articulated body frame from MG Force Impulse Gundam, the Mobile Suit comes packed with its Sword Silhouette to complete Sword Impulse Gundam.
Sharply molded in color, the transformable Impulse Gundam is formed by three main parts: Chest Flyer, Core Splendor, and Leg Flyer. Core Splendor's cockpit can be opened to insert an in-scale sitting pilot figure. In addition, landing gear are provided for both the Chest Flyer and Leg Flyer as a original gimmick that's never seen in the anime! The Sword Silhouette pack carried by the Silhouette Flyer can be attached to the back of the Mobile Suit to form Sword Impulse Gundam.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The HG Astray Gold Frame Amatsu Mina is a highly detailed and articulated model kit molded in multiple colors with stickers for the markings.
Get yours now!
To coincide with the 10th anniversary of Gundam Seed Bandai has rereleased this hugely popular HG kit of the Blitz Gundam in a 'remastered' color reflecting those seen on the upcoming Blu-ray release.
A stand attachment and marking stickers are also included in this special release.
Bandai's big Gunpla release of 2012 is old fan favorite Nu Gundam as drawn by famous Gundam artist Hajime Katoki.
The original Master Grade Nu Gundam released way back in 2001 and a lot has changed in Gunpla engineering and the new Nu Gundam Ver Ka is an excellent example of just how far Bandai have come.
Key features of the Nu include an all non-ABS plastic frame making it lighter, hidden green psycho frame that is exposed when certain sections of the armor seperate, the ability to take Bandai's LED to light up the head, water-slide decals for markings, and the option to build it as a twin Fin Funnel set up!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
In the fall of 2017, a 1/1 scale RX-0 Unicorn Gundam will be installed at the Diver City Tokyo Plaza shopping center, and to commemorate the event, Bandai is bringing out this amazingly detailed RG Unicorn Gundam!
It features an advanced inner framework, and it can transform between Unicorn mode and Destroy mode. It's armed with a Beam Magnum, a Hyper Bazooka, a shield and two beam sabers.
Don't wait on this one, order it today!
Note: If there is a certain waterslide decal you are looking for, but is not available on our site, you can PM us to check with us so we can source it for you!
High quality and detailed waterslide decal by Snow Flame/Flaming Snow Studios (雪焰)
Steps for Applying Decals to Gunpla:
1. Cut out the desired design or icon from the decal sheet and trim it to achieve the exact size you want.
2. Dip the cut decal into water for approximately 30 seconds. This allows the decal to detach easily from the decal sheet.
3. Using a pair of tweezers and a cotton swab, gently slide the decal from the backing sheet to the precise location on your Gunpla.
4. After placing the decal, adjust or realign it to your satisfaction. With a dry cotton swab, gently roll over the decal to absorb excess water.Smooth the edges and remove any bubbles for a flawless finish.
5. Leave the applied decal to dry completely.Remember: If the decal back sticks together, use the toothpick method in water for safe detachment.
Important Note: Do not attempt to detach the decal directly in the water, as its adhesive is extremely strong. In case the back of the decal sticks together, place the decal in water and use a toothpick to carefully detach it.
The RG series brings you detailed premolded coloring never before seen in 1/144 scale.
Its latest release, the Strike Freedom Gundam, is now available in Deactive Mode coloring. An inner frame with matte silver plating and realistic decals combine to help recreate the Deactive Mode colors in RG.
